Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Dehumidifiers for Industrial Facilities
Dehumidifiers for industrial facilities hold moisture down across large volumes where product, process and equipment all suffer from it. Bry-Air desiccant and Ebac refrigerant units sized to process loads.
Filters
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – 175 CFM, 5.8 lbs/hr, 208–240V
Bry-AirThe Bry-Air MiniPAC MP-175 is a 175 CFM desiccant dehumidifier for low-humidity control below the operating limits of refrigerant and LGR equipment...
View full detailsAbatement Technologies AT250RS LGR Dehumidifier – 266 PPD, 400 CFM, 115V
Abatement TechnologiesThe Abatement Technologies AT250RS AquaTrap is a low-grain refrigerant (LGR) dehumidifier for water damage restoration — 266 pints per day at satur...
View full detailsEbac DD1200 10541GR-US Desiccant Dehumidifier 460V 3ph – 562 PPD, -4°F, 200 lbs
EbacEbac DD1200 Desiccant Dehumidifier – Model 10541GR-US (460V, 3-Phase) The Ebac DD1200 (10541GR-US) is the highest-capacity unit in Ebac's DD desicc...
View full detailsBry-Air MiniPAC MP-350 Desiccant Dehumidifier – 350 CFM, 11.7 lbs/hr, 3-Phase
Bry-AirThe Bry-Air MiniPAC MP-350 is a 350 CFM three-phase desiccant dehumidifier for mid-scale industrial humidity control — removes 11.7 lbs of moisture...
View full detailsEbac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero
EbacDD400-E Desiccant Dehumidifier for Sub-Zero Drying The Ebac DD400-E uses a desiccant rotor rather than a refrigeration cycle, so it keeps drying in...
View full detailsEbac PD220-D 10157GY-US Pool Dehumidifier 220V – 190 PPD, 665 CFM, R32
EbacPD220-D Pool Dehumidifier for Larger Indoor Pools The Ebac PD220-D handles the moisture load of larger indoor pools and spa halls, removing 190 pin...
View full detailsEbac CD425 10141BR-US Refrigerant Dehumidifier 220V with Pump – 285 PPD, 1750 CFM, 353 lbs
EbacCD425 220V Industrial Dehumidifier with Onboard Pump The Ebac CD425 pulls 285 pints a day across spaces up to 52,972 cubic feet, putting it in the ...
View full detailsDapper Supply DP-CD1130 Commercial Dehumidifier – 290 PPD, Built-In Pump, 24,000 Sq Ft, ETL
Dapper SupplyDP-CD1130 290-PPD Dehumidifier with 16.4-Foot Pump Lift for Large-Loss Drying The DP-CD1130 pulls up to 290 pints per day (145 PPD AHAM at 80°F/60...
View full details
Save 0%
Save %
Dapper Supply DP-CD1129 Commercial Dehumidifier – 190 PPD, 700 CFM, 15,000 Sq Ft, R32
Dapper Supply DP-CD1129 Commercial Dehumidifier – 190 PPD, 700 CFM, 15,000 Sq Ft, R32
Dapper SupplyDP-CD1129 190-PPD LGR-Class Dehumidifier for Mid-Size Restoration The DP-CD1129 removes up to 190 PPD (94.5 PPD AHAM at 80°F/60% RH) and moves 700 ...
View full detailsEbac DD200 Desiccant Dehumidifier - Low Humidity Control – 115 CFM, 110V
EbacEbac DD200 Desiccant Dehumidifier The Ebac DD200 Desiccant Dehumidifier is a compact, rugged, and highly efficient portable unit designed for appli...
View full detailsBry-Air MiniPAC MP-2700 Desiccant Dehumidifier – 2700 CFM, 460V 3-Phase
Bry-AirMP-2700 MiniPAC Desiccant Dehumidifier — 2700 CFM Large-Scale Industrial Moisture Control with PLC Controls and MODBUS Connectivity The Bry-Air Mi...
View full detailsEbac CD425 10140BR-US Refrigerant Dehumidifier 220V – 285 PPD, 1750 CFM, 353 lbs
EbacEbac CD425-D HVAC Dehumidifier – Model 10140BR-US (220V, 3-Phase, Gravity Drain) The Ebac CD425-D (10140BR-US) is the 220V, gravity-drain configura...
View full detailsEbac CD220-D 11181GR-US Refrigerant Dehumidifier 220V – 157 PPD, 664 CFM, 176 lbs
EbacCD220-D Ducted Commercial Dehumidifier for Mid-Size Spaces The Ebac CD220-D removes 157 pints a day and holds humidity across roughly 21,000 cubic ...
View full detailsBry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-1200 Desiccant Dehumidifier — High-Capacity Drying for Cold and Industrial Spaces Made to order — estimated 5-week lead time. The Bry-Air Mini...
View full detailsBry-Air MiniPAC MP-2700 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-2700 Desiccant Dehumidifier — 2700 CFM Industrial Moisture Control with PLC Integration Made to order — approximately 5-week lead time. The Br...
View full detailsBry-Air MiniPAC MP-600 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-600 Desiccant Dehumidifier — 600 CFM Industrial Drying for Cold and Process Spaces Made to order — estimated 5-week lead time. The Bry-Air Min...
View full detailsBry-Air MiniPAC MP-1800 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-1800 Desiccant Dehumidifier — High-Volume Moisture Control Below Refrigerant Limits Made to order — estimated 5-week lead time. The Bry-Air Mi...
View full detailsBry-Air MiniPAC MP-350 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-350 Desiccant Dehumidifier — 3-Phase Low-Humidity Control for Industrial Environments Made to order — estimated 5-week lead time. The Bry-Air ...
View full detailsBry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-175 Desiccant Dehumidifier — Low-Humidity Control Below Refrigerant Limits Made to order — estimated 5-week lead time. The Bry-Air MiniPAC MP-...
View full detailsBry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless Steel
Bry-AirMP-100 Desiccant Dehumidifier — Low-Temperature Humidity Control Made to order — estimated 5-week lead time. The Bry-Air MiniPAC MP-100 is a 100 ...
View full detailsDapper Supply DP-CD1131 Commercial Dehumidifier – 350 PPD, Built-In Pump, 30,000 Sq Ft, ETL
Dapper SupplyDP-CD1131 350-PPD Dehumidifier for Large-Loss and Industrial Drying The DP-CD1131 removes up to 350 PPD (176 PPD AHAM at 80°F/60% RH) and moves 750...
View full detailsBry-Air MiniPAC MP-1200 Desiccant Dehumidifier – 1200 CFM, 39.6 lbs/hr
Bry-AirMP-1200 MiniPAC Desiccant Dehumidifier — 1200 CFM Industrial Moisture Control Below Refrigerant Operating Limits The Bry-Air MiniPAC MP-1200 is a 1...
View full detailsEbac DD400-P Desiccant Dehumidifier - DD400P - Low Humidity Control – 197 CFM, 220V
EbacEbac DD400-P Desiccant Dehumidifier The Ebac DD400-P is the largest portable desiccant dehumidifier in the EIPL range, designed for maximum perform...
View full detailsEbac DD400 Desiccant Dehumidifier - Low Humidity Control – 197 CFM, 220V
EbacEbac DD400 Desiccant Dehumidifier The Ebac DD400 Desiccant Dehumidifier is the ultimate solution for applications that require extremely low relati...
View full detailsDehumidifiers for Industrial Facilities: Desiccant and High-Capacity Refrigerant Units
Industrial moisture problems are rarely about comfort. They show up as rust on tooling, condensation dripping onto finished goods, caking in powder handling, and coatings that will not cure. This collection holds desiccant dehumidifiers and high-capacity refrigerant units from Bry-Air, Ebac, Dapper Supply, Abatement Technologies, Namco and XPOWER. Crawl-space units and ducted whole-house models are not included, because neither is sized for a plant floor.
Desiccant or Refrigerant: Temperature Drives the Choice
Refrigerant machines pull moisture onto a cold coil, so output falls as the space gets colder and the coil begins to frost. Below roughly 65°F you want either a refrigerant unit specifically rated for low temperature or a desiccant machine, which uses a rotor that adsorbs moisture without depending on a cold coil. Desiccant is the usual answer for cold storage, unheated warehouses, winter work, and anywhere the requirement is a low humidity setpoint rather than simply less humidity. The Ebac DD1200 is rated 562 PPD at 80°F and 60% RH, and its minimum operating temperature is -4°F. Those are two separate specifications, which is worth watching on any datasheet: desiccant output also shifts with inlet temperature, moisture load and regeneration conditions, so size against your own conditions rather than the headline number.
Reading Capacity: PPD Against lbs/hr
Two rating conventions are in play here, and comparing the figures directly will mislead you. Ebac, Dapper Supply, Abatement Technologies and XPOWER publish pints per day: the Dapper Supply DP-CD1131 at 350 PPD, the Abatement Technologies AT250RS at 266 PPD, the XPOWER XD-165L at 165 PPD, and the refrigerant Ebac CD425 at 285 PPD and 1,750 CFM. Bry-Air rates the MiniPAC line in pounds of moisture removed per hour alongside airflow, so the MiniPAC MP-600 is 20 lbs/hr at 600 CFM and the MP-2700 is a 2,700 CFM machine. A pint of water weighs a little over a pound, so 20 lbs/hr comes out near 460 pints a day. Size on the moisture load, not on floor area.
Three-Phase Power and Continuous Duty
Settle voltage and phase early, because bringing new service to an install location is an expensive surprise. Among the Bry-Air units, the MP-350, MP-600 and MP-2700 are three-phase machines, while the smaller MP-100 and MP-175 run on 208 to 240V. The Ebac DD700, DD900 and DD1200 are each listed in both 220V and 460V three-phase builds. Stainless steel versions of the MiniPAC line are listed alongside the standard builds for environments that need them. Controlling humidity also limits mold growth: the EPA advises keeping indoor humidity below 60 percent, ideally between 30 and 50 percent (EPA, Mold and Moisture).
Related: Commercial Dehumidifiers · Desiccant Dehumidifiers · Ebac Dehumidifiers
Free Sizing Tools
Not Sure What Size Equipment You Need?
Answer a few questions and get a spec-matched recommendation from our free calculators — no email required.
Dehumidifier Sizing Calculator
Enter room size and conditions to get the right pints-per-day capacity for your space.
Use the calculator →Air Scrubber Calculator
Match CFM and air changes per hour to your room for mold, dust, and restoration jobs.
Use the calculator →Floor Scrubber Selector
Size a walk-behind or ride-on scrubber to your floor area and cleaning schedule.
Use the calculator →Water Damage Equipment Calculator
Plan how many air movers and dehumidifiers a water-loss job needs, by class and size.
Use the calculator →Let customers speak for us
from 96 reviewsPerfect vacuum cleaner. Well made , goes around chair & table legs easily
Nice compact scrubber/vacume. Works very well.
Fast shipping Great Experience
Great product
This vacuum is very light and powerful
Gets the job done without hassle. This vacuum is powerful and reliable for everyday cleaning. Definitely recommend it.
we have three cats, and this purifier has done wonders in removing pet odors and dander
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
this bedroom purifier has transformed my sleep quality. the air is so much fresher and cleaner worth every penny
Amazing customer service and reliable products
very customer friendly and professional design.
perfect for maneuvering in tight areas the HEPA filter is a huge bonus
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
This vacuum has exceeded my expectations. It's super powerful and handles daily cleaning with ease. I recommend it to everyone.
really effective in sweeping up all kinds of debris from our warehouse floor