Skip to content
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel
1/11
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools

Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel

Brand: Bry-AirSKU: MP-175
$12,000.00
FREE SHIPPING – You save $200+ on freight

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – (978) 295-7538
Built to order — ships in 5 weeks after purchase

Need help choosing? Talk to an expert

(978) 295-7538

MP-175 Desiccant Dehumidifier — Low-Humidity Control Below Refrigerant Limits

Made to order — estimated 5-week lead time.

The Bry-Air MiniPAC MP-175 is a 175 CFM desiccant dehumidifier designed for spaces where refrigerant systems lose capacity or stop operating entirely. It delivers 5.8 lbs/hr moisture removal independent of ambient temperature, making it suitable for cold storage staging areas, pharmaceutical rooms, and laboratories targeting sub-30% RH. This stainless steel configuration is specified for environments requiring corrosion resistance and controlled sanitation.

Bry-Air MP-175 Low-Temperature Moisture Removal

The MP-175 maintains consistent drying performance across a wide temperature range without defrost interruptions or capacity loss.

  • Consistent output at low temperatures — maintains 5.8 lbs/hr removal where refrigerant units lose efficiency or shut down
  • 175 CFM process airflow — supports medium-sized labs, packaging rooms, and cold storage ante-areas without oversizing equipment
  • Stainless steel construction — resists corrosion in washdown environments and high-humidity intake conditions
  • No defrost cycle — eliminates downtime caused by coil icing in low-temperature applications
  • Integrated airflow safety monitoring — prevents operation under restricted airflow conditions caused by filter loading or fan issues
  • Flexible installation options — adapts to floor, wall, or ducted configurations in constrained mechanical spaces

MP-175 Applications and Environments

The MP-175 is deployed in pharmaceutical manufacturing for tablet coating and packaging where moisture control directly impacts product stability. Laboratories and materials testing facilities use it to maintain controlled low-humidity conditions for hygroscopic samples and calibration equipment. Cold storage operators install it in staging areas and ante-rooms adjacent to freezer vaults where refrigerant systems cannot operate. Electronics manufacturing and military storage facilities rely on it to reduce corrosion risk on sensitive components. It is also used in archival storage, seed banks, and museum collections where stable humidity levels must be maintained year-round.

MP-175 Desiccant Wheel Operation and Exhaust Requirements

The MP-175 uses a rotating desiccant wheel that adsorbs moisture from the process airstream and continuously regenerates through a heated reactivation airflow. This design removes moisture without a compressor or evaporator coil, allowing operation from sub-freezing temperatures up to 140°F. The reactivation airstream must be ducted to the exterior, as it carries the extracted moisture away from the conditioned space. The stainless steel housing supports installations in environments requiring corrosion resistance or periodic washdown.

Specifications

Model MP-175 / MiniPAC
Brand Bry-Air
Type Desiccant (rotary wheel, no compressor)
Process Airflow 175 CFM
Process External Static 0.60 in. wc
Reactivation Airflow 58 CFM
Reactivation External Static -0.40 in. wc
Moisture Removal 5.8 lbs/hr
Voltage 208–240V / 1-phase / 60Hz
Weight 158 lbs
Construction Stainless Steel Housing
Rotor Water-washable with stainless steel flange
Operating Modes Auto / Manual
Mounting Options Floor, wall, or duct-inline
Safety Systems Differential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks
Lead Time Made to order, approximately 5 weeks


Product Warranty Information

"Parts-Only Limited Warranty"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call (978) 295-7538.

Product Image
Added to cart
Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless SteelBry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless...
View Cart
$12,000.00

Frequently Asked Questions

How does the MP-175 differ from the MP-100 — when should I choose the larger unit?
The MP-175 processes 175 CFM versus the MP-100's 100 CFM — a 75% increase in process air volume — and removes approximately 5.8 lbs/hr of moisture versus 3.3 lbs/hr. Both units run on single-phase 208–240V power, so the choice is primarily about room size and moisture load. The MP-175 is appropriate for medium laboratories, pharmaceutical packaging rooms, or cold storage staging areas where the MP-100's 100 CFM throughput would be undersized. Both models share the same desiccant wheel architecture, safety systems, and water-washable rotor.
What is the minimum relative humidity the MP-175 can achieve?
Desiccant dehumidifiers can reduce relative humidity well below the limits of refrigerant equipment — below 10% RH is achievable under favorable inlet conditions. The actual minimum for the MP-175 depends on inlet air temperature and humidity, process airflow rate, and reactivation heat input. Request specific performance curves from Bry-Air for your application conditions before sizing.
What temperature range can the MP-175 operate in?
The MP-175 operates from approximately -4°F (-20°C) to 140°F (60°C). Refrigerant dehumidifiers lose significant capacity below 60°F and typically cease effective operation below 35°F due to evaporator coil icing. The MP-175's desiccant rotor adsorbs moisture through a chemical process with no icing threshold, making it the correct choice for cold storage ante-rooms, freezer staging areas, and low-temperature industrial environments.
Does the reactivation exhaust from the MP-175 need to be ducted to the exterior?
Yes. The reactivation air stream carries the moisture extracted from the process air and exits as warm, humid exhaust at 58 CFM. This exhaust must be ducted to the building exterior. Dumping the reactivation exhaust back into the conditioned space returns the extracted moisture and eliminates the dehumidification effect. Route the exhaust duct through an exterior wall, roof penetration, or existing building exhaust pathway.
What does the differential air pressure switch do on the MP-175?
The differential air pressure switch monitors the pressure drop across the MP-175's air path during operation. If a filter becomes clogged, a blower fails, or airflow drops below the operating threshold for any reason, the switch triggers an alarm or initiates a controlled shutdown. This protects the reactivation heater from overtemperature and notifies facility personnel of a maintenance condition — critical in unattended installations where a blocked filter would otherwise go undetected.
Can the MP-175 rotor be serviced without factory support?
Yes. The desiccant rotor in the MP-175 is water-washable and can be removed and rinsed on-site to clear accumulated dust and particulate without chemical cleaning agents. The stainless steel flange resists corrosion during the wash process. Follow Bry-Air's published rotor maintenance procedure to avoid damaging the desiccant matrix during washing — the procedure does not require specialized tools or factory technicians.
What electrical circuit does the MP-175 require?
The MP-175 requires a dedicated 208–240V single-phase 60Hz circuit. It is not compatible with standard 115V or 120V outlets. A dedicated 20–30 amp 240V circuit is typically required depending on total connected load. Verify panel capacity and circuit sizing with a licensed electrician before installation; the unit must not share a circuit with other high-draw equipment.

Why Choose US Cleaning Tools?

See the price, buy now, get it fast. No quotes, no callbacks, no sales rep required.

  • No Quote Needed — All prices shown. Click buy, checkout, done.
  • Authorized Dealer — Brand-new units with full manufacturer warranty.
  • Trusted by 10,000+ Facilities — Schools, warehouses, contractors nationwide.
  • Expert Support — Real specialists at (978) 295-7538.
  • Fast Shipping — Trackable delivery in 2–8 business days.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

― Easy and convenient payment ―
Ach Direct Debit Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay USDC Visa
― Verified security ―
✔ Secure payment    ✔ 30-day return policy    ✔ Data protection

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare