Skip to content
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless Steel
1/11
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools

Bry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless Steel

$9,365.00
FREE SHIPPING – You save $200+ on freight

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – (978) 295-7538
Built to order — ships in 5 weeks after purchase

Need help choosing? Talk to an expert

(978) 295-7538

MP-100 Desiccant Dehumidifier — Low-Temperature Humidity Control

Made to order — estimated 5-week lead time.

The Bry-Air MiniPAC MP-100 is a 100 CFM desiccant dehumidifier built for environments where refrigerant units lose capacity or shut down entirely. This stainless steel configuration is specified for corrosion-sensitive or washdown applications requiring consistent moisture removal below 50°F. With 3.3 lbs/hr removal and no defrost cycle, it maintains stable humidity where LGR units cycle or ice.

Bry-Air MP-100 Low-Temperature Operation

Designed for facilities that cannot tolerate humidity swings caused by defrost cycles or low-temperature shutdown.

  • Desiccant wheel process — keeps removing moisture in sub-freezing conditions where refrigerant systems stop
  • 3.3 lbs/hr moisture removal — maintains steady extraction rate regardless of ambient temperature drop
  • 100 CFM at 0.70" wc — supports ducted or localized drying in small controlled environments
  • Stainless steel construction — resists corrosion in high-humidity or washdown environments
  • No defrost cycle — eliminates downtime associated with coil icing in LGR systems
  • Water-washable rotor — allows field cleaning without chemical agents, reducing maintenance intervals

MP-100 Applications and Environments

The MP-100 is used in pharmaceutical production rooms where humidity above 30% RH affects coating and packaging stability. Laboratories rely on it to maintain low-humidity conditions for hygroscopic materials and precision instruments. Cold storage facilities deploy it in ante-rooms and staging areas where ambient temperatures prevent refrigerant units from operating. Electronics manufacturing and military maintenance facilities use it to limit corrosion on sensitive components. It is also specified in archival storage, seed banks, and food processing environments where consistent low humidity is required regardless of seasonal temperature shifts.

MP-100 Desiccant Wheel and Reactivation System

The MP-100 uses a rotating desiccant rotor to adsorb moisture from process air, eliminating the need for a compressor or evaporator coil. A separate reactivation airstream (34 CFM) heats and removes collected moisture, which must be ducted outside the conditioned space. Integrated safety systems include a differential pressure switch for airflow monitoring and a high-temperature safety thermostat for heater protection. A controlled cooldown sequence protects the reactivation heater during shutdown.

Specifications

Model MP-100 / MiniPAC
Brand Bry-Air
Type Desiccant (rotary wheel, no compressor)
Process Airflow 100 CFM
External Static 0.70" wc
Reactivation Airflow 34 CFM
Moisture Removal 3.3 lbs/hr
Voltage 208–240V / 1-phase / 60Hz
Weight 139 lbs
Construction Stainless Steel (made to order, ~5 weeks)
Rotor Water-washable with stainless steel flange
Operating Modes Auto / Manual
Mounting Options Floor, wall, or duct-inline
Safety Systems Differential pressure switch, safety thermostat, cooldown cycle


Product Warranty Information

"Parts-Only Limited Warranty"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call (978) 295-7538.

Product Image
Added to cart
Bry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless SteelBry-Air MiniPAC MP-100 Desiccant Dehumidifier – Stainless...
View Cart
$9,365.00

Frequently Asked Questions

How does a desiccant dehumidifier differ from a refrigerant or LGR unit?
Refrigerant and LGR dehumidifiers remove moisture by cooling process air below its dew point onto evaporator coils. They lose efficiency below approximately 60°F and cease effective operation below 35°F due to coil icing and defrost cycling. The MP-100's desiccant rotor adsorbs moisture through a chemical process — no compressor, no evaporator, no icing. It delivers consistent 3.3 lbs/hr moisture removal at sub-freezing temperatures where LGR units cannot operate, and can achieve relative humidity levels below 30% RH that refrigerant units cannot sustain.
What is the minimum relative humidity the MP-100 can achieve?
Desiccant units can achieve significantly lower grain depressions than refrigerant equipment and are capable of reducing relative humidity below 10% RH under the right inlet conditions. The MP-100's achievable minimum depends on inlet temperature and humidity, process airflow rate, and reactivation heat input. For specific performance curves at your target conditions, request engineering data from Bry-Air for the MP-100.
What temperature range can the MP-100 operate in?
Desiccant dehumidifiers operate across a much wider temperature range than refrigerant units. The MP-100 is effective from approximately -4°F (-20°C) to 140°F (60°C), making it suitable for cold storage ante-rooms, freezer staging areas, and outdoor-adjacent installations in cold climates where refrigerant dehumidifiers would shut down or cycle through continuous defrost.
Does the reactivation exhaust need to be ducted outside?
Yes. The MP-100's reactivation air stream carries the moisture extracted from the process air and exits as warm, humid exhaust. This exhaust must be ducted to the building exterior. Dumping the reactivation exhaust back into the conditioned space returns the extracted moisture and eliminates the dehumidification effect entirely.
What does the differential air pressure switch do?
The differential air pressure switch monitors the pressure drop across the MP-100's air path. If a filter becomes blocked, a fan fails, or airflow drops below the operating threshold for any reason, the switch triggers an alarm or initiates a controlled shutdown. This protects the reactivation heater from overtemperature and alerts facility staff to a maintenance condition — a filter blockage in an unattended installation would otherwise go undetected until equipment damage occurred.
Can the desiccant rotor be serviced in the field?
Yes. The MP-100's desiccant rotor is water-washable and can be rinsed on-site to clear accumulated dust and particulate without chemical cleaning agents. The stainless steel flange resists corrosion during the wash process. Follow Bry-Air's rotor maintenance procedure to avoid damaging the desiccant matrix during washing.
What power supply does the MP-100 require?
The MP-100 requires 208–240V / 1-phase / 60Hz power. It is not compatible with standard 115V or 120V outlets. A dedicated 240V circuit — typically 20 or 30 amps depending on total connected load — is required. Verify available panel capacity and circuit sizing with a licensed electrician before installation.

Why Choose US Cleaning Tools?

See the price, buy now, get it fast. No quotes, no callbacks, no sales rep required.

  • No Quote Needed — All prices shown. Click buy, checkout, done.
  • Authorized Dealer — Brand-new units with full manufacturer warranty.
  • Trusted by 10,000+ Facilities — Schools, warehouses, contractors nationwide.
  • Expert Support — Real specialists at (978) 295-7538.
  • Fast Shipping — Trackable delivery in 2–8 business days.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

― Easy and convenient payment ―
Ach Direct Debit Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay USDC Visa
― Verified security ―
✔ Secure payment    ✔ 30-day return policy    ✔ Data protection

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare