Dapper Supply DP-CD1130 Commercial Dehumidifier – 290 PPD, Built-In Pump, 24,000 Sq Ft, ETL

DP-CD1130 290-PPD Dehumidifier with 16.4-Foot Pump Lift for Large-Loss Drying

The DP-CD1130 pulls up to 290 pints per day (145 PPD AHAM at 80°F/60% RH) across spaces to 24,000 sq ft, moving 700 CFM through a rotary compressor on R32 refrigerant. A built-in pump lifts condensate 16.4 feet to a sink or exterior point, so the unit runs unattended on large commercial losses without bucket swaps. At 58 dB and 108 lb in a steel housing, it holds up to job-site repositioning while staying quiet enough for occupied buildings.

DP-CD1130 Extraction and Drainage

• 290 PPD at saturation (145 PPD AHAM) — clears heavy moisture loads from flooded floors and high-humidity plants.
• 24,000 sq ft coverage at 700 CFM — one unit dries a warehouse section or multi-room restoration zone.
• Built-in pump lifts water 16.4 ft — continuous drainage to an elevated sink or window with no manual emptying.
• 2-gallon (7.5L) tank plus 3.28 ft gravity hose — backup capacity and a gravity option when a pump run is not practical.
• 10–90% RH control across 41–95°F — holds a target humidity through wide temperature swings on site.
• Auto-restart, auto-defrost, and overload protection — recovers after power loss and runs continuously without babysitting.
• 1200W (220V/5.6A) rotary compressor — steady draw with a washable filter that keeps maintenance low.

DP-CD1130 Applications and Environments

Water damage restoration contractors deploy the DP-CD1130 as a primary unit on large commercial losses, drying flooded retail floors, school gymnasiums, and hospital wings where 24,000 sq ft of coverage cuts the equipment count on the job. Industrial manufacturers run it through humid seasons to hold RH down in machining and assembly areas where corrosion and tolerance drift are a risk. Cold storage operators place it in receiving docks and staging areas where warm incoming product drives sustained condensation. Construction firms use it during concrete curing on large slabs, where controlling ambient humidity affects cure time and final strength. The 16.4-foot pump lift is what makes it practical in basements and lower levels where the nearest drain sits above the machine.

Specifications