Skip to content
Shipping Policy Return & Refund Policy Contact Us B2B Program FAQ
Home/Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero
Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero
1/2
Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero
Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero

Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero

Brand: EbacSKU: 10500GR-USAvailable to order
$4,867.00
Free shipping on this item

Ships from US manufacturer with factory warranty

Request a quote / purchase order

Tell us your quantity, delivery ZIP code and required date. For help choosing equipment, include your application.

Email a quote request Call (978) 295-7538
Planning around a job date? Confirm current availability and delivery timing with us before ordering.
Authorized Ebac dealerGenuine Ebac equipment with full factory warranty support
Tax-exempt & PO acceptedSend your exemption certificate and we bill without sales tax
30-day returnsUnused equipment in original packaging, within 30 days
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Venmo Visa

Need help choosing? Talk to an expert

+1 (978) 295-7538

DD400-E Desiccant Dehumidifier for Sub-Zero Drying

The Ebac DD400-E uses a desiccant rotor rather than a refrigeration cycle, so it keeps drying in cold air where a compressor unit drops off. It runs to -4°F, moves 271 CFM of process air on a 220V single-phase supply, and targets the low humidity levels that refrigerant units cannot reach.

DD400-E 10500GR-US Desiccant Operation

  • Drying down to -4°F keeps the unit working in cold stores and winter sites where a refrigerant coil would frost and stall
  • Silica-gel rotor reaches the low relative humidity that moisture-sensitive materials and coatings need
  • 271 CFM process air with a separate 80 CFM regen stream dries the space while exhausting captured moisture outside
  • High-capacity PTC heaters regenerate the rotor efficiently and modulate with the load
  • Manual and automatic modes with a remote humidity sensor facility let an operator run a fixed output or hold a setpoint
  • Carry handles on a compact 59.5 lb cabinet make it a one-person move between rooms

DD400-E Applications and Environments

The DD400-E fits cold storage, pharmaceutical and laboratory rooms, coating and paint booths, and restoration drying in unheated structures. Because it captures moisture on a desiccant rather than condensing it, it serves walk-in freezers, server and battery rooms, and archive storage where the target humidity is well below what refrigerant units hold. The separate process and regeneration ducts let an installer keep dry air in the room while sending wet air outdoors.

Specifications

Typical Extraction 71.5 PPD
Process Airflow (Dry) 271 CFM
Regen Airflow (Wet) 80 CFM
Process Air Duct 5 in
Regen Air Duct 4 in
Rotor Speed 20 rph
Power Supply 220V / 1-Phase / 60Hz
Power Consumption 1.8 kW
Current 8 A
Heater High-capacity PTC
Operating Temp Range -4°F – 104°F
Noise 67 dBA
Dimensions (H×W×D) 14.3 × 14.5 × 18.7 in
Weight 59.5 lbs

Documents

DD400-E Owner's Manual (PDF)

DD400-E Specification Sheet (PDF)

DD400-E Spare Parts List (PDF)

DD400-E Wiring Diagram (PDF)

DD400-E Wiring Schematic (PDF)

TypeDesiccant
Capacity72 PPD
Airflow271 CFM
Voltage230V

Manufacturer's Warranty

This product comes with a full manufacturer's warranty. All warranty claims are handled directly by the manufacturer.

For specific warranty details, please contact us at +1 (978) 295-7538 or email info@uscleaningtools.com

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus the non-refundable payment processing fee (2.9% + $0.30), so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-ZeroEbac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 ...
View Cart
$4,867.00

Frequently Asked Questions

How is the DD400-E different from a refrigerant dehumidifier?
The DD400-E uses a desiccant rotor instead of a refrigeration cycle, so it keeps drying in cold air down to -4°F and reaches the low relative humidity refrigerant units cannot. Refrigerant dehumidifiers lose capacity below about 50°F and frost up near freezing.
What is the airflow and duct setup on the DD400-E?
It moves 271 CFM of process air through a 5" duct and exhausts 80 CFM of moist regeneration air through a separate 4" duct, so dry air stays in the room while captured moisture goes outside.
What power does the DD400-E 10500GR-US require?
It runs on 220V single-phase 60 Hz at 8A (1.8 kW), with high-capacity PTC heaters that regenerate the desiccant rotor.
Where is a desiccant dehumidifier like the DD400-E the right choice?
Cold storage, walk-in freezers, pharmaceutical and laboratory rooms, coating and paint booths, server and battery rooms, and restoration drying in unheated structures — anywhere the target humidity is below what refrigerant units can hold.
Can the DD400-E hold a humidity setpoint?
Yes. It runs in manual or automatic mode and accepts a remote humidity sensor, so it can run a fixed output or hold a setpoint.
Does the DD400-E ship free?
Yes, it is over $3,000 so it ships free, with a 1-year manufacturer warranty.

How the Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V Compares to Other Ebac dehumidifiers

The closest 5 models from the 51 Ebac dehumidifiers we carry, by capacity. Not sure which size fits the job? Call +1 (978) 295-7538.

ModelCapacityAirflow
Ebac CS90E Whole House Ducted HVAC Dehumidifier70 PPD360 CFM
Ebac WM150-D Whole House Ducted HVAC Dehumidifier71 PPD—
Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V— this model72 PPD271 CFM
Ebac CD85 Whole House Ducted HVAC Dehumidifier75 PPD—
Ebac CD100 Whole House Ducted HVAC Dehumidifier90 PPD—

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare