Skip to content
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel
1/11
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools
Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier - US Cleaning Tools

Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel

Brand: Bry-AirSKU: MP-1200
$44,605.00
FREE SHIPPING – You save $200+ on freight

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – (978) 295-7538
Built to order — ships in 5 weeks after purchase

Need help choosing? Talk to an expert

(978) 295-7538

MP-1200 Desiccant Dehumidifier — High-Capacity Drying for Cold and Industrial Spaces

Made to order — estimated 5-week lead time.

The Bry-Air MiniPAC MP-1200 is a 1,200 CFM desiccant dehumidifier designed for facilities where refrigerant units lose capacity or stop operating altogether. It maintains steady moisture removal at low temperatures and low humidity targets without defrost interruptions. Compared to LGR systems at similar airflow, the MP-1200 delivers consistent output across the full operating range, including cold storage and process-critical environments.

Bry-Air MP-1200 Continuous Low-Temperature Performance

Desiccant rotor operation removes the temperature limitations associated with compressor-based systems.

  • 1200 CFM process airflow — supports large warehouse zones, manufacturing floors, and multi-room drying applications
  • 39.6 lbs/hr moisture removal — maintains consistent extraction even as ambient temperature drops below refrigerant operating limits
  • No defrost interruptions — eliminates downtime common in refrigerant units operating below 50°F
  • Water-washable rotor with stainless steel flange — allows on-site maintenance while resisting corrosion in high-humidity intake conditions
  • Integrated airflow safety controls — protects operation by shutting down under low airflow or overtemperature conditions
  • Flexible installation configurations — supports floor, wall, or ducted integration in mechanical rooms and process areas

MP-1200 Applications and Environments

The MP-1200 is deployed in pharmaceutical manufacturing for tablet coating, powder handling, and packaging areas where humidity control directly affects product stability. Cold storage warehouses and refrigerated loading docks use it to prevent condensation on inventory and structural surfaces where refrigerant systems fail at low temperatures. Large distribution centers, automotive storage facilities, and electronics manufacturing environments rely on it to reduce corrosion risk and maintain material integrity. Archival storage rooms, museums, and government facilities use it to stabilize humidity for paper, film, and sensitive materials across seasonal temperature changes.

MP-1200 Desiccant vs Refrigerant Operation

Refrigerant systems depend on coil temperature dropping below the dew point, which becomes impractical below 45–50°F due to icing and defrost cycling. The MP-1200 uses a desiccant rotor to adsorb moisture through a chemical process, maintaining output from sub-freezing conditions up to high ambient temperatures. The 400 CFM reactivation airstream removes moisture from the rotor and must be ducted outside; recirculating this exhaust will reintroduce moisture into the space. The unit requires 460V three-phase power and should be installed with proper ducting and electrical capacity verification.

Specifications

Model MP-1200 / MiniPAC
Brand Bry-Air
Type Desiccant (rotary wheel, no compressor)
Process Airflow 1,200 CFM
Process External Static 0.75 in. wc
Reactivation Airflow 400 CFM
Reactivation External Static 0.45 in. wc
Moisture Removal 39.6 lbs/hr
Voltage 460V / 3-phase / 60Hz
Dimensions (L × W × H) 47.3" × 34.6" × 24.75"
Rotor Water-washable, stainless steel flange
Operating Modes Auto / Manual
Mounting Options Floor, wall, or duct-inline
Safety Systems Differential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks


Product Warranty Information

"Parts-Only Limited Warranty"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call (978) 295-7538.

Product Image
Added to cart
Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless SteelBry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainles...
View Cart
$44,605.00

Frequently Asked Questions

How does the MP-1200's 39.6 lbs/hr moisture removal compare to refrigerant units at the same CFM?
A refrigerant dehumidifier rated at 1,200 CFM will deliver its published moisture removal capacity at around 80°F and 60% RH — and that capacity drops sharply as temperature falls. Below 50°F, coil icing begins disrupting output; below 35°F most refrigerant units stop removing meaningful moisture. The MP-1200's desiccant rotor delivers consistent 39.6 lbs/hr across a temperature range that extends well below freezing, with no defrost cycling. In cold loading docks, freezer staging areas, or facilities with sub-40°F ambient conditions, the effective removal difference between the two technologies at 1,200 CFM is substantial.
What electrical service does the MP-1200 require, and what does 3-phase installation involve?
The MP-1200 requires 460V / 3-phase / 60Hz power. This is not compatible with standard single-phase 208–240V service. A 3-phase circuit requires a panel with 3-phase capacity, proper wire gauge for the connected load, and a correctly sized breaker — typically handled by a licensed industrial electrician. Facilities without existing 3-phase service will need a transformer or service upgrade. Verify available panel capacity before installation.
Why must the reactivation exhaust be ducted to the exterior, and how much airflow does it carry?
The reactivation airstream carries 400 CFM of warm, humid air — the moisture extracted from the process airstream and driven out of the desiccant rotor by the reactivation heater. If this exhaust is returned to the conditioned space rather than ducted to the exterior, it re-introduces the extracted moisture and eliminates the dehumidification effect. The reactivation duct must terminate outside the building envelope, with care to prevent exhaust recirculation back through the process air inlet.
How large a warehouse or manufacturing floor can the MP-1200 serve?
At 1,200 CFM, the MP-1200 can achieve approximately 6 air changes per hour in a space of about 12,000 cubic feet — a 3,000 sq ft room with 4-foot effective ceiling height, or a 2,000 sq ft room with 6-foot ceilings. For higher-volume spaces or tighter humidity targets, multiple units or larger MiniPAC models are appropriate. The required ACH depends on the space's moisture load, infiltration rate, and target relative humidity — Bry-Air can provide engineering guidance for specific applications.
Can the desiccant rotor on the MP-1200 be serviced without returning the unit to a depot?
Yes. The MP-1200's desiccant rotor is water-washable and designed for on-site maintenance. Accumulated particulate can be rinsed from the rotor without chemical cleaning agents. The stainless steel flange resists corrosion during the washing process. Follow Bry-Air's rotor maintenance procedure to avoid damaging the desiccant matrix. Standard filter replacement and rotor inspection can be performed by facility maintenance staff.
What humidity level can the MP-1200 achieve, and is it suitable for pharmaceutical cleanrooms?
Desiccant dehumidifiers can achieve significantly lower relative humidity than refrigerant units — down to 10% RH or below under favorable inlet conditions. The achievable minimum at the MP-1200's outlet depends on inlet temperature and humidity, process CFM, and reactivation heat input. Pharmaceutical tablet coating and powder blending rooms typically target 20–40% RH; archival storage and museum environments typically require 40–50% RH with tight control. The MP-1200 is suitable for either application range.
What is the difference between auto and manual operating modes on the MP-1200?
In auto mode, the MP-1200 cycles on and off in response to a humidistat — either a factory-installed optional humidistat or an external building management system signal. This mode conserves energy when the space reaches setpoint. In manual mode, the unit runs continuously at full output regardless of ambient humidity, which is appropriate for scheduled drying operations, initial drawdown of a high-humidity space, or applications where continuous maximum extraction is required regardless of setpoint.

Why Choose US Cleaning Tools?

See the price, buy now, get it fast. No quotes, no callbacks, no sales rep required.

  • No Quote Needed — All prices shown. Click buy, checkout, done.
  • Authorized Dealer — Brand-new units with full manufacturer warranty.
  • Trusted by 10,000+ Facilities — Schools, warehouses, contractors nationwide.
  • Expert Support — Real specialists at (978) 295-7538.
  • Fast Shipping — Trackable delivery in 2–8 business days.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

― Easy and convenient payment ―
Ach Direct Debit Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay USDC Visa
― Verified security ―
✔ Secure payment    ✔ 30-day return policy    ✔ Data protection

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare