Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Pressure Washer Nozzles
Pressure washer nozzles, not the pump, decide what pressure reaches the surface, so orifice size has to match your machine's flow. Rotating, turbo, detergent and multi-position tips from 3000 to 8700 PSI.
Filters
Mi-T-M AW-7510-0035 Rotating Nozzle – 5100 PSI, 3.5 Orifice
Mi-T-MRated 5100 PSI and 212°F, this rotating nozzle has a 3.5 orifice. Its 0° stream spins to cover 25°, which speeds up work on concrete, driveways and...
View full detailsMi-T-M AW-0018-0148 Pressure Washer Nozzle – Blister Pak - Chem Nozzle
Mi-T-MA 65° chemical nozzle for applying detergent, packaged in a blister pack and sold individually.Specifications 65° Sold individually
Mi-T-M 18-0113 Pressure Washer Nozzle – Silicone Carbide Nozzle
Mi-T-MA carbide replacement nozzle for the Mi-T-M sand injector. Wet sandblasting with the injector is dust-free and strips coatings, rust, paint, stains...
View full detailsMi-T-M 18-0373 Pressure Washer Nozzle – 0032 1/4mqc Detergent
Mi-T-MA long range chemical nozzle that quick connects to the end of the wand. It runs at low pressure and has a range of 30 feet while drawing chemical.
Mi-T-M AW-7200-0004 Pressure Washer Nozzle – 6 Position Multi-#4.0
Mi-T-MA multi-function nozzle that puts six stainless steel nozzles in one compact head: 0°, 15°, 25° and 40°, plus soap and rinse. This version has a 4....
View full detailsMi-T-M AW-7200-0035 Pressure Washer Nozzle – 6 Position Multi-#3.5
Mi-T-MSix stainless steel nozzles in one multi-function head give you 0°, 15°, 25° and 40° patterns plus soap and rinse without swapping tips. This model...
View full detailsMi-T-M AW-7510-0004 Pressure Washer Nozzle – Acc-Rotate 5100psi #4.0
Mi-T-MA 4.0 orifice rotating nozzle, 5100 PSI rated, with a 212°F maximum temperature. It delivers 0° impact with 25° coverage and includes a filter with...
View full detailsMi-T-M AW-7500-SERIES Pressure Washer Nozzle – Acc-Rotate 6000psi
Mi-T-MA 6000 PSI rotating nozzle accessory from the Mi-T-M AW-7500 series.
Mi-T-M AW-7004-SERIES Pressure Washer Nozzle – Acc-Rotating Nozzle-Laser
Mi-T-MRotating nozzle accessory from Mi-T-M, listed under the name Rotating Nozzle-Laser.
Mi-T-M 18-0371 Pressure Washer Nozzle – Rotating W/Lance 1.4mm
Mi-T-MThis rotating nozzle comes on a lance with a 1.4mm orifice and is rated for 3500 PSI at a 105° maximum temperature. Its spinning 0° stream covers a...
View full detailsMi-T-M 18-0370 Pressure Washer Nozzle – Rotating W/Lance 1.25mm
Mi-T-MA rotating nozzle with lance and a 1.25mm orifice, rated 2400 PSI and 105° maximum temperature. It gives 0° spray impact spread over 25° of coverag...
View full detailsMi-T-M AW-3100-0003 Pressure Washer Nozzle – Assy - Qc Misting Nozzle
Mi-T-MA quick connect misting nozzle that attaches to a 36-inch lance for misting hard to reach areas.
Mi-T-M AW-7510-0045 Pressure Washer Nozzle – Acc-Rotate 5100psi #4.5
Mi-T-MA 5100 PSI rotating nozzle accessory with a #4.5 orifice.
Mi-T-M AW-0018-0374 Pressure Washer Nozzle – Rotating 8700 Psi #3.0
Mi-T-MA rotating nozzle with a 3.0 orifice rated for 8700 PSI and a 190°F maximum temperature. It combines 0° impact with 25° coverage for concrete surfa...
View full detailsMi-T-M AW-7500-0045 Pressure Washer Nozzle – Acc-Rotate 6000psi #4.5
Mi-T-MRotating nozzle for pressure washers, rated for 6000 PSI and fitted with a #4.5 orifice.
Mi-T-M AW-7500-0035 Pressure Washer Nozzle – Acc-Rotate 6000psi #3.5
Mi-T-MA Mi-T-M rotating nozzle accessory rated 6000 PSI with a #3.5 orifice.
Mi-T-M AW-7510-0055 Pressure Washer Nozzle – Acc-Rotate 5100psi #5.5
Mi-T-MMi-T-M rotating nozzle with a #5.5 orifice, rated for 5100 PSI.
Mi-T-M AW-7510-SERIES Pressure Washer Nozzle – Acc-Rotate 5100psi
Mi-T-MRotating nozzle accessory from Mi-T-M, rated for 5100 PSI.
Mi-T-M AW-7510-0003 Pressure Washer Nozzle – Acc-Rotate 5100psi #3.0
Mi-T-MThis rotating nozzle has a 3.0 orifice and is rated 5100 PSI with a 212°F maximum temperature. The rotating 0° jet sweeps a 25° area, and a filter ...
View full detailsMi-T-M AW-7310-0003 Pressure Washer Nozzle – Acc-Rot 3000psi #3.0
Mi-T-MA rotating nozzle with a 3.0 orifice, rated for 3600 PSI and 212°F. It turns a 0° stream into 25° coverage and comes with a filter and quick connec...
View full detailsPressure Washer Nozzles Sized to Your Machine's Flow and Pressure
The nozzle, not the pump, decides what pressure actually reaches the surface. A machine rated 4000 PSI fitted with the wrong orifice will not produce 4000 PSI at the work, and fitting an orifice that is too small can drive the pump past its safe operating pressure. This range covers rotating and turbo nozzles rated from 3000 up to 8700 PSI in orifice sizes from 3.0 through 5.5.
Orifice Size Comes From GPM and PSI Together
Nozzle size is not a preference, it is a calculation. The number stamped on a nozzle refers to the orifice, and the correct one depends on both the machine's flow in gallons per minute and its rated pressure. Fit an orifice that is too large and pressure drops, because the pump cannot keep the larger hole fed. Fit one too small and pressure climbs above the machine's rating, which loads the pump and the unloader and shortens the life of both. When a machine has lost pressure for no obvious reason, a worn nozzle is the first thing to check: the orifice erodes wider with use, and the symptom looks exactly like a failing pump.
Rotating Nozzles Trade Finish for Speed
A rotating or turbo nozzle spins a zero-degree jet in a cone. The result is the cutting power of a pencil jet across the coverage of a fan, which is why they strip concrete, block and heavy equipment far faster than a fixed fan tip. That same aggression takes paint off siding, cuts into soft mortar and etches wood. They belong on hard surfaces where speed matters, not on anything with a finish worth keeping.
Replace Nozzles on Wear, Not on Failure
Nozzles rarely fail outright. They erode, and the loss of performance is gradual enough that operators adapt to it without noticing. On a machine in daily use the orifice opens measurably over months, and pressure at the surface falls with it. Nozzles are inexpensive relative to the labour hours lost cleaning slowly with a worn one, and relative to the pump damage that follows chasing lost pressure by adjusting the unloader.
Keep spares in the sizes your fleet actually runs. A worn nozzle stops a crew as effectively as a failed pump, and it is the cheapest part on the machine.
Related: Pressure Washer Guns & Wands, Pressure Washer Hoses, Pressure Washer Parts & Accessories, Pressure Washer Fittings & Couplers.
Frequently Asked Questions
How do I choose the right pressure washer nozzle size?
Why has my pressure washer lost pressure?
What is a turbo or rotating nozzle used for?
How often should pressure washer nozzles be replaced?
Let customers speak for us
from 97 reviewsPerfect vacuum cleaner. Well made , goes around chair & table legs easily
Nice compact scrubber/vacume. Works very well.
Fast shipping Great Experience
Great product
This vacuum is very light and powerful
Gets the job done without hassle. This vacuum is powerful and reliable for everyday cleaning. Definitely recommend it.
we have three cats, and this purifier has done wonders in removing pet odors and dander
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
this bedroom purifier has transformed my sleep quality. the air is so much fresher and cleaner worth every penny
Amazing customer service and reliable products
very customer friendly and professional design.
perfect for maneuvering in tight areas the HEPA filter is a huge bonus
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
This vacuum has exceeded my expectations. It's super powerful and handles daily cleaning with ease. I recommend it to everyone.
really effective in sweeping up all kinds of debris from our warehouse floor