Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Pressure Washer Hoses
Pressure washer hoses here run 3,000 to 7,200 PSI in 5/16", 3/8" and 1/2" ID, built for commercial duty cycles. Mi-T-M wire-braid assemblies, jumper hoses and gun-to-wand connections.
Filters
Mi-T-M 50-0167 Pressure Washer Hose – Assy - Hose To Wand (Swivel)
Mi-T-MA tapered cuff end fitting that joins the suction hose to the wand or to a hose connector. Mi-T-M lists it with its suction hoses and fittings for ...
View full detailsMi-T-M 23-0069 Pressure Washer Hose – Barb 1/4mp X 3/8 Hose-Brass
Mi-T-MA brass barbed hose fitting with a 1/4-inch MNPT thread on one side and a barb for 3/8-inch ID hose on the other. It is meant for making up hose fr...
View full detailsMi-T-M 23-0052 Pressure Washer Hose – Barb 3/8mp X1/4 Hose Std-Brass
Mi-T-MThis brass barbed fitting has a 3/8-inch MNPT threaded end and a barb sized for 1/4-inch ID hose. Use it to assemble bulk hose or repair a damaged ...
View full detailsMi-T-M 852-0139 Pressure Washer Hose – Kit - Jumper Hose W/Quick Conn
Mi-T-MA 57-inch jumper hose kit with quick connects for running water from the pressure washer to a hose reel. Mi-T-M notes that this jumper hose is not ...
View full detailsMi-T-M 850-0278 Pressure Washer Hose – Jumper Hose Assy
Mi-T-MAn 85-inch jumper hose with quick connects that links the pressure washer to its hose reel. Mi-T-M notes it is not rated for steam applications.Fit...
View full detailsMi-T-M 15-0163 Pressure Washer Hose – 3/8x200' 4500psi R2 Black
Mi-T-MA 200-foot black R2 extension hose for hose reels, rated 4500 PSI with a 250°F maximum temperature. The 3/8-inch ID hose screw connects between you...
View full detailsMi-T-M 15-0162 Pressure Washer Hose – 3/8x150' 4500psi R2 Black
Mi-T-MAdd 150 feet of cleaning radius with this black R2 extension hose. It carries a 4500 PSI and 250°F rating, a 3/8-inch ID and screw connect fittings...
View full detailsMi-T-M 15-0146 Pressure Washer Hose – 3/8x50' 3000psi R1 Black
Mi-T-MA 50-foot hot water extension hose with a 3/8-inch ID, rated 3000 PSI and 250°F. Connect it between your existing hose and spray wand to reach fart...
View full detailsMi-T-M AW-0851-0338 Pressure Washer Hose – 3/8x50' 4000psi R1 Gray
Mi-T-MA 50-foot gray extension hose rated 4000 PSI, R1, with a 3/8-inch inside diameter. It is non-marking, rated to 250°F, and uses quick connects so yo...
View full detailsMi-T-M 15-0365 Pressure Washer Hose – 3/8"X50' 7200psi R3 Black
Mi-T-MA 50-foot R3 extension hose rated 7200 PSI, with a 3/8-inch ID and a 210°F maximum temperature. Screw connect ends join it between your hose and sp...
View full detailsMi-T-M 15-0273 Pressure Washer Hose – 3/8x100' 4000psi R1 Gray
Mi-T-MA gray, non-marking 100-foot extension hose, 3/8-inch ID, rated 4000 PSI and 250°F. Quick connects put it between your hose and spray wand to widen...
View full detailsMi-T-M 855-0057 Pressure Washer Hose – 50ft Extra Hose For Pwr
Mi-T-MA 50-foot length of 1-1/2-inch vacuum hose, sold as extra hose. Mi-T-M says the setup can have up to 100 feet of extension hose.
Mi-T-M 15-0161 Pressure Washer Hose – 3/8x100' 4500psi R2 Black
Mi-T-MA 100-foot, 3/8-inch ID hot water extension hose rated for 4500 PSI. The black R2 hose handles water up to 250°F and threads on between the existin...
View full detailsMi-T-M 15-0160 Pressure Washer Hose – 3/8x75' 4500psi R2 Black
Mi-T-MThis 75-foot R2 extension hose adds reach on hot water jobs. It is rated 4500 PSI and 250°F, with a 3/8-inch ID and screw connect ends for use betw...
View full detailsMi-T-M 15-0006 Pressure Washer Hose – 50' X 3/4" Water
Mi-T-MA 50-foot black industrial water supply hose with a 3/4-inch ID for bringing water to the pressure washer. It is rated for 200 PSI and 212°F and ha...
View full detailsMi-T-M 15-0159 Pressure Washer Hose – 3/8x40" 4500psi R2 Black
Mi-T-MA black 3/8-inch R2 jumper hose rated 4500 PSI and 40 inches long, used with a trailer-mounted hose reel.Specifications40-inch, for hose reels on s...
View full detailsMi-T-M 851-0262 Pressure Washer Hose – Assy Hose 3000 Psi
Mi-T-MThis 50-foot black extension hose has a 3/8-inch ID and R1 construction rated at 3000 PSI, with a 250°F maximum temperature. Mi-T-M lists it among ...
View full detailsMi-T-M 850-0433 Pressure Washer Hose – Extension Hose Assy 50ft W/Qc
Mi-T-MA 50-foot, 3/8-inch ID extension hose from Mi-T-M's hot water hose line, rated 4500 PSI with R2 construction and a 250°F maximum. It goes between y...
View full detailsMi-T-M AW-3100-0002 Pressure Washer Hose – 5ft Suction Feed Assy
Mi-T-MThis 5-foot supply hose is made for Mister Combination Pressure Washers, where it serves as the suction feed line.
Mi-T-M 15-0392 Pressure Washer Hose – 1/4"X75' 3100psi Blu
Mi-T-MA blue 1/4-inch pressure washer hose, 75 feet long and rated 3100 psi.
Mi-T-M 851-0420 Pressure Washer Hose – Assy - Hose W/Qc 7200 Psi
Mi-T-MA black extension hose rated for 7200 PSI with R2 construction, 50 feet long and 3/8-inch ID. It carries a 250°F maximum temperature rating and use...
View full detailsMi-T-M 851-0317 Pressure Washer Hose – 3/8x50' 6000psi R2 Gray
Mi-T-MA gray, non-marking 50-foot hose with a 3/8-inch ID, built to R2 and rated for 6000 PSI and 250°F. Use it as an extension between your current hose...
View full detailsMi-T-M 851-0089 Pressure Washer Hose – Assy 1/2" X 50' 4500psi
Mi-T-MA black 50-foot extension hose with a 1/2-inch ID, rated 4500 PSI (R2) and 250°F. Fit it between the current hose and the spray wand to work farthe...
View full detailsMi-T-M 851-0006 Pressure Washer Hose – 3/8x50' 4500psi R2 Gray
Mi-T-MThis gray, non-marking extension hose is 50 feet long with a 3/8-inch ID and an R2 rating of 4500 PSI. Adding it between the existing hose and the ...
View full detailsPressure Washer Hoses Built for Commercial Pressure and Duty Cycles
A hose is the part of a pressure washer that fails first. It gets dragged across concrete, driven over, coiled hot and left in the sun, and it carries the full working pressure of the pump every second the trigger is down. Consumer hoses are not built for that. The hoses here are rated from 4000 PSI up to 8700 PSI, in 5/16", 3/8" and 1/2" internal diameters, and lengths from 23 to 50 feet.
Match the Pressure Rating to the Pump, Not the Job
Hose pressure ratings describe continuous working pressure, not a peak the hose survives once. A pump that runs at 4000 PSI produces spikes above that every time the trigger closes and the unloader diverts flow. Choosing a hose rated at or barely above the pump's output leaves nothing for those spikes. Where a machine runs 4000 PSI, a 4500 PSI R2 hose gives real margin. Above 5000 PSI, two-wire construction is the only sensible choice.
Diameter Controls Pressure Loss Over Distance
Internal diameter matters more as hose gets longer. A 5/16" hose is fine on short runs and low-GPM machines, but on a 50 foot run at higher flow it drops noticeable pressure between the pump and the gun. Machines above roughly 4 GPM should run 3/8". Half-inch hose is for high-flow units and long runs where a smaller line would starve the gun. If you are adding a second length to reach further, step up rather than down.
R1, R2, and Where Non-Marking Earns Its Price
R1 hose carries a single layer of steel wire braid and suits most cold water work. R2 carries two layers, handles higher pressure, and resists crushing where hose gets driven over or pulled around corners. Black cover is standard. Grey and other non-marking covers cost more and exist for one reason: a black hose dragged across white concrete, tile, or a finished floor leaves scuff marks that are harder to remove than the dirt you came to clean. On interior and food-service work, non-marking pays for itself the first time.
Hot water machines need hose rated for temperature as well as pressure. Running a cold-water-only hose on a hot water unit softens the cover and shortens its life quickly.
Related: Pressure Washer Fittings & Couplers, Pressure Washer Guns & Wands, Pressure Washer Parts & Accessories, Hot Water Pressure Washers.
Frequently Asked Questions
What PSI pressure washer hose do I need?
Is 3/8" or 1/2" pressure washer hose better?
What is the difference between R1 and R2 pressure washer hose?
Do I need a non-marking pressure washer hose?
Can I use a cold water hose on a hot water pressure washer?
Let customers speak for us
from 97 reviewsPerfect vacuum cleaner. Well made , goes around chair & table legs easily
Nice compact scrubber/vacume. Works very well.
Fast shipping Great Experience
Great product
This vacuum is very light and powerful
Gets the job done without hassle. This vacuum is powerful and reliable for everyday cleaning. Definitely recommend it.
we have three cats, and this purifier has done wonders in removing pet odors and dander
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
this bedroom purifier has transformed my sleep quality. the air is so much fresher and cleaner worth every penny
Amazing customer service and reliable products
very customer friendly and professional design.
perfect for maneuvering in tight areas the HEPA filter is a huge bonus
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
This vacuum has exceeded my expectations. It's super powerful and handles daily cleaning with ease. I recommend it to everyone.
really effective in sweeping up all kinds of debris from our warehouse floor