Skip to content
Free Shipping on Most Orders
Orders over $300 ship free to the continental US. Threshold may vary by brand.
Expert Support
Talk to a specialist — not a call center. +1 (978) 295-7538
30-Day Returns
Not the right machine? Return or exchange within 30 days, no hassle.
Authorized Dealer
30 pro brands sold direct. Full manufacturer warranties honored.

Floor Buffers

Floor buffers and burnishers maintain wax finishes on VCT, terrazzo, marble and sealed concrete. Single-disc 175 RPM models strip and scrub, high-speed burnishers up to 2,000 RPM restore shine, in 10 to 21 inch decks.

Filters

Original price $2,434.00 - Original price $2,489.00
Original price
$2,434.00 - $2,489.00
$2,434.00 - $2,489.00
Current price $2,434.00

Hawk F41-B 20-Inch Brute 360 Floor Machine with Dust Pickup – 1.5 HP TEFC

Hawk Enterprises
In stock

Hawk F41-B Brute 360 Severe Duty Floor Machine with 360-Degree Dust Pickup The Hawk F41-B Brute 360 adds a full 360-degree dust pickup skirt to the...

View full details
Original price $2,434.00 - Original price $2,489.00
Original price
$2,434.00 - $2,489.00
$2,434.00 - $2,489.00
Current price $2,434.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,391.00 - $1,791.00
$1,391.00 - $1,791.00
Current price $1,391.00

Hawk Glide Freedom HD 17" Floor Machine – 175 RPM, 1.5 HP, 10:1 Gears

Hawk Enterprises
In stock

Heavy-Duty 17" Forward-Motion Floor Machine at 175 RPM with 10:1 Helical GearsThe Hawk Glide Freedom HD 17" (F91-17-01) applies the forward-motion ...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,391.00 - $1,791.00
$1,391.00 - $1,791.00
Current price $1,391.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,417.00
$1,417.00 - $1,417.00
Current price $1,417.00

Hawk Glide Freedom XHD 17" Floor Machine – 165 RPM, 1.5 HP, Floating Head

Hawk Enterprises
In stock

Extra-Heavy-Duty 17" Forward-Motion Floor Machine with Floating WD Head at 165 RPMThe Hawk Glide Freedom XHD 17" (F92-17-01) runs a 1.5 HP dual-cap...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,417.00
$1,417.00 - $1,417.00
Current price $1,417.00
Original price $0.00 - Original price $0.00
Original price $0.00
$2,423.00
$2,423.00 - $2,423.00
Current price $2,423.00

Hawk Enterprises F95-17-DB Glide 360 DBC WD Floor Machine – 165 RPM, 1.0 HP, 124 lb

Hawk Enterprises
In stock

Dust-Free Concrete and Wood Blending — Hawk 17" Glide 360 DBC The Hawk F95-17-DB 17" Glide 360 DBC WD Professional Floor Machine combines a floatin...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$2,423.00
$2,423.00 - $2,423.00
Current price $2,423.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,276.00
$1,276.00 - $1,276.00
Current price $1,276.00

Hawk Enterprises F27-01 XHD Floor Machine – 165 RPM, 1.5 HP Dual Cap, 94 lb, 66 dB

Hawk Enterprises
In stock

High-Torque 165 RPM Maintenance With the Hawk 17" XHD The Hawk F27-01 17" Extra Heavy Duty Professional Floor Machine delivers 165 RPM through a 1....

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,276.00
$1,276.00 - $1,276.00
Current price $1,276.00
Original price $0.00 - Original price $0.00
Original price $0.00
$2,981.00
$2,981.00 - $2,981.00
Current price $2,981.00

Hawk Enterprises F37-01-PRO Brute Pro Floor Machine – 165 RPM, 1.5 HP TEFC, 173 lb

Hawk Enterprises
In stock

Full Surface-Prep System — Hawk 17" Brute Pro Severe Duty The Hawk F37-01-PRO 17" Brute Pro Severe Duty Floor Machine ships as a complete surface-p...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$2,981.00
$2,981.00 - $2,981.00
Current price $2,981.00
Original price $1,087.00 - Original price $1,208.00
Original price
$1,087.00 - $1,208.00
$1,087.00 - $1,208.00
Current price $1,087.00

Hawk Enterprises F60-15-05 Mighty Floor Machine – 165 RPM, 1.0 HP TEFC, 88 lb

Hawk Enterprises
In stock

Stairwell and Restroom Floor Prep With the Hawk 15" Mighty The Hawk F60-15-05 15" Mighty Small Area Severe Duty Floor Machine is engineered for tig...

View full details
Original price $1,087.00 - Original price $1,208.00
Original price
$1,087.00 - $1,208.00
$1,087.00 - $1,208.00
Current price $1,087.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,171.00
$1,171.00 - $1,171.00
Current price $1,171.00

Hawk Enterprises F15-05 HD Floor Machine – 175 RPM, 1.5 HP, 91 lb, 66 dB

Hawk Enterprises
In stock

Commercial VCT and Tile Maintenance With the Hawk 15" HD Floor Machine The Hawk F15-05 15" Heavy Duty Professional Floor Machine is built for daily...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,171.00
$1,171.00 - $1,171.00
Current price $1,171.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,582.00
$1,582.00 - $1,582.00
Current price $1,582.00

Hawk Enterprises F15-05-DX 15" Deluxe Floor Machine – 175 RPM, 1.5 HP, 4-Gal Tank, 91 lb

Hawk Enterprises
In stock

Wet Scrubbing Configuration Built Into the Hawk 15" Heavy Duty Deluxe The Hawk F15-05-DX 15" Heavy Duty Deluxe Professional Floor Machine delivers ...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,582.00
$1,582.00 - $1,582.00
Current price $1,582.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,266.00
$1,266.00 - $1,266.00
Current price $1,266.00

Hawk Enterprises F25-05 XHD Floor Machine – 165 RPM, 1.5 HP Twin Capacitor, 90 lb

Hawk Enterprises
In stock

Commercial-Grade 15" XHD Scrubbing and Stripping With the Hawk F25-05 The Hawk F25-05 15" Extra Heavy Duty Professional Floor Machine runs a 1.5 HP...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,266.00
$1,266.00 - $1,266.00
Current price $1,266.00
Original price $1,144.00 - Original price $1,144.00
Original price
$1,144.00
$1,144.00 - $1,144.00
Current price $1,144.00

Hawk Enterprises F13-01 HD Floor Machine – 175 RPM, 1.5 HP, 87 lb, GS42 Certified

Hawk Enterprises
In stock

Heavy-Duty 175 RPM Scrubbing in a 13" Compact Frame The Hawk F13-01 13" Heavy Duty Professional Floor Machine runs a 1.5 HP dual-capacitor AC motor...

View full details
Original price $1,144.00 - Original price $1,144.00
Original price
$1,144.00
$1,144.00 - $1,144.00
Current price $1,144.00
Original price $1,514.00 - Original price $1,514.00
Original price
$1,514.00
$1,514.00 - $1,514.00
Current price $1,514.00

Hawk Enterprises F13-01-DX Deluxe Floor Machine – 175 RPM, 1.5 HP, 4-Gal Tank, 87 lb

Hawk Enterprises
In stock

Compact Wet Scrubbing Power With the Hawk 13" Heavy Duty Deluxe The Hawk F13-01-DX 13" Heavy Duty Deluxe Floor Machine delivers 1.5 HP dual-capacit...

View full details
Original price $1,514.00 - Original price $1,514.00
Original price
$1,514.00
$1,514.00 - $1,514.00
Current price $1,514.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,225.00
$1,225.00 - $1,225.00
Current price $1,225.00

Hawk Enterprises F23-01 XHD Floor Machine – 165 RPM, 1.5 HP, Triple-Planetary, 87 lb

Hawk Enterprises
In stock

Industrial-Grade 13" Scrubbing With the Hawk XHD Floor Machine The Hawk F23-01 13" Extra Heavy Duty Professional Floor Machine delivers 1.5 HP dual...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,225.00
$1,225.00 - $1,225.00
Current price $1,225.00
Original price $0.00 - Original price $0.00
Original price $0.00
$1,718.00 - $1,773.00
$1,718.00 - $1,773.00
Current price $1,718.00

Hawk Enterprises F33-01-B Severe Duty Floor Machine – 165 RPM, 1.5 HP TEFC, 113 lb

Hawk Enterprises
In stock

Concrete Resurfacing and Stone Polishing With the Hawk 13" Brute The Hawk F33-01-B 13" Brute Severe Duty Floor Machine is built for the most demand...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$1,718.00 - $1,773.00
$1,718.00 - $1,773.00
Current price $1,718.00

Floor Buffers and Polishing Machines for Commercial Use

Which Speed and Pad Type Matches Your Floor Surface

Low-speed buffers run at 175 RPM and work on vinyl composition tile, terrazzo, and older resilient floors where aggressive friction would damage the finish. High-speed burnishers operate at 1,500 to 3,000 RPM and produce the wet-look shine common in hospitals, schools, and retail environments. The floor type comes first: high-speed machines on soft vinyl strip finish faster than intended. Pad selection follows speed, with red and white pads pairing with low-speed scrubbing and buffing, and natural or tan pads handling high-speed burnishing. The same machine is sold under three names depending on context — floor buffer in janitorial supply catalogs, floor polisher in retail and hospitality settings, and burnisher when configured for high-speed hard-wax shine. A hardwood floor buffer specifically refers to a low-speed model with a soft pad for wood substrates, where high-speed RPM would lift finish. Mercury Floor Machines produces a range of single-disc machines calibrated for specific floor types. Tornado and Powr-Flite both offer dual-speed models that shift between scrub and burnish modes without changing equipment.

How Often Buffing Actually Extends Floor Finish Life

Finish manufacturers typically recommend spray buffing at least twice weekly in high-traffic corridors to maintain gloss and prevent finish breakdown. When finish wears through to the floor surface, the refinishing cycle costs more in labor and materials than a consistent maintenance schedule. The IICRC's floor care guidelines outline maintenance frequencies based on foot traffic volume and floor substrate. Nacecare machines are a common choice for janitorial contractors who run the same equipment across multiple accounts, where consistent RPM and pad pressure matter for predictable results. Buffing also removes light scuff marks and redistributes finish rather than stripping and reapplying, which reduces chemical use over a building's annual cycle.

Related: Floor Care Equipment · Walk-Behind Floor Scrubbers · Floor Sweepers · 17 Inch Floor Buffers

What Cord Length and Weight Mean for Large Facilities

A 17-inch buffer typically runs 94 to 124 pounds. Over a shift covering 30,000 square feet, operator fatigue compounds with every pound above that baseline. Models with front-mounted controls and padded handles reduce strain in extended runs. Cord length matters at scale: a 50-foot cord covers most wing configurations, while a 100-foot cord reduces outlet changes in long corridors. Bissell Big Green commercial buffers are built for facilities that run equipment daily. Battery-powered burnishers eliminate cord management entirely and produce consistent pad pressure from start to finish of the charge cycle, though they require charging infrastructure. The OSHA ergonomics guidelines for floor care equipment address handle height and vibration thresholds relevant to daily machine use. Powr-Flite's line includes machines with auto-drive to reduce lateral arm force over large areas.

Frequently Asked Questions

What's the difference between low-speed and high-speed buffers?
Low-speed buffers (175-350 RPM) are used for scrubbing, stripping, and heavy cleaning. High-speed burnishers (1,000-3,000 RPM) polish and create high-gloss finishes on sealed floors. Most facilities need both types - low-speed for deep cleaning and high-speed for daily maintenance and shine.
What size floor buffer do I need?
Buffer size depends on your space and obstacles. 13-17 inch models work well in tight spaces like restrooms and small offices. 17-20 inch buffers are versatile for most commercial applications. 20+ inch machines maximize productivity in large, open areas like warehouses and shopping centers.
What type of pad should I use for my floors?
Pad selection depends on your task: Black pads for heavy stripping, brown for aggressive scrubbing, green for general scrubbing, red for light cleaning/buffing, white for polishing/burnishing, and natural fiber for dry buffing. Using the correct pad type prevents floor damage and achieves desired results.
How often should commercial floors be buffed?
High-traffic areas benefit from daily buffing to maintain shine and remove scuffs. Medium-traffic areas typically need buffing 2-3 times per week. Low-traffic areas may only require weekly buffing. Deep scrubbing and recoating schedules depend on floor condition and wear patterns.
What's the difference between a floor buffer and a floor scrubber?
Floor buffers are single-disc machines that polish, buff, and strip floors but require separate mopping. Floor scrubbers are walk-behind or ride-on machines with built-in solution tanks and vacuum recovery that scrub and dry floors in one pass. Buffers are for floor finish maintenance; scrubbers are for deep cleaning.
What is the difference between a floor buffer and a polisher?
A floor buffer typically refers to a 175 RPM low-speed single-disc machine used for stripping wax, scrubbing daily soil, and spray-buffing finish. A polisher (also called a burnisher) runs 1,500–2,500 RPM and does one job: high-gloss finish on already-clean floors. The terms get used interchangeably in catalogs, but the RPM tells the story. 175 RPM strips and scrubs; 1500 RPM polishes. Using a burnisher to strip wax destroys the floor finish; using a low-speed buffer to polish gets no shine.
How long does a floor buffer last?
Commercial 175 RPM floor buffers (Hawk, Mercury, Namco, Powr-Flite) typically run 8–12 years of daily janitorial use before motor or gear replacement. The wear items are the carbon brushes (replace every 800–1,200 hours), the apron (yearly on heavy strip work), and the pad driver clutch plate (every 3–5 years). Avoid water intrusion into the motor housing during wet stripping — that's the #1 cause of premature motor failure. Burnishers run shorter (5–8 years) because the higher RPM stresses bearings faster.
Can you use a floor buffer on hardwood?
A floor buffer can be used on hardwood if it has a soft screen or buffing pad and runs with reduced down-pressure. The Hawk F91-20-01 20-inch Glide Freedom HD is a low-speed option priced at $1,489. It has a 1.5 HP motor, a 175 RPM pad speed and a 10:1 gear ratio. Do not use a stiff bassine or nylon brush on hardwood. Those accessories are made for scrubbing grout lines on tile and preparing concrete for stripping, and they can damage a wood finish. For a high-gloss hardwood finish, use a high-speed burnisher with a soft white pad instead of a 175 RPM low-speed machine.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare