Skip to content
Hawk F93-20-01 20-Inch Glide Freedom 2-Speed Floor Machine – 1.5 HP DC, 175/320 RPM
1/6
Hawk 20
Hawk 20
Hawk 20
Hawk 20
Hawk 20
Hawk 20

Hawk F93-20-01 20-Inch Glide Freedom 2-Speed Floor Machine – 1.5 HP DC, 175/320 RPM

Brand: Hawk EnterprisesSKU: F93-20-01In Stock – Ready to Ship
$1,626.00

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Order before 5:00 PM EST for same-day dispatch. Estimated delivery:

Need help choosing? Talk to an expert

+1 (978) 295-7538

Hawk F93-20-01 Glide Freedom 2-Speed Floor Machine – 175 and 320 RPM

The Hawk F93-20-01 Glide Freedom 2-Speed combines the forward-motion control system of the Glide series with a 1.5 HP DC rectified motor selectable between 175 RPM for stripping and scrubbing, and 320 RPM for spray buffing. The DC motor maintains consistent torque at both speeds without the RPM drop that AC motors exhibit under sustained pad load, making it the right selection when floor conditions vary between passes.

F93-20-01 DC Motor, Speed Range, and Noise by Setting

  • Motor: 1.5 HP DC rectified — converts AC line power to DC internally; delivers flat torque at both 175 and 320 RPM under sustained pad resistance.
  • Low speed: 175 RPM at 62 dB — quietest stripping setting across the Glide series; below most occupied-facility noise thresholds without earplugs.
  • High speed: 320 RPM at 69 dB — spray buffing and finish maintenance speed; GS42 compliant at both settings.
  • Weight: 115 lbs — same pad pressure as the XHD model; sufficient for stripping passes with 175 RPM setting.
  • Cord: 50 ft industrial grade — 12-3 two-piece with cord lock for standard commercial room coverage.
  • Brush size: 19 inch — slightly wider than the 18-inch on the XHD; increases effective cleaning path per pass.

Two-Speed Operation for Strip-and-Buff Programs

Facilities running strip-and-buff cycles in a single shift use the F93-20-01 to run the stripping pass at 175 RPM and switch to 320 RPM for the spray buffing pass without changing machines. The DC motor's flat torque curve means both speeds hold their rated RPM under pad load—175 RPM stays at 175 under stripping resistance, and 320 RPM holds consistent at the buffing pass when floor finish is partially set. The forward-motion control applies equally at both speeds, making the 320 RPM buffing pass easier to control than a conventional machine at the same speed.

DC Motor Selection for Variable-Speed Floor Machines

In a two-speed floor machine, the motor must perform efficiently at both speed settings without overheating or losing RPM under load. DC rectified motors achieve this through electronic speed control—current is regulated to match the selected RPM rather than relying on mechanical switching. This makes the F93-20-01's 175 RPM stripping setting as stable under load as its 320 RPM buffing setting, which is harder to achieve in AC two-speed designs that use capacitor switching to change speeds.

Specification Value
Model F93-20-01 (Glide HD 2-Speed)
Brush Size 19 inch
Motor 1.5 HP DC rectified 2-speed
Low Speed 175 RPM
High Speed 320 RPM
Amp Draw 9.2 A (low) / 9.6 A (high)
Weight 115 lbs
Noise 62 dB (low) / 69 dB (high)
Motor Cover Steel
Power Cord 50 ft 12-3 industrial, 2-piece

Product Warranty Information

"1 Year Service Warranty, 3 Years For Parts"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships for a full 100% refund.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Hawk F93-20-01 20-Inch Glide Freedom 2-Speed Floor Machine – 1.5 HP DC, 175/320 RPMHawk F93-20-01 20-Inch Glide Freedom 2-Speed Floor Machin...
View Cart
$1,626.00

Frequently Asked Questions

What are the two speed settings on the Hawk F93-20-01 Glide Freedom 2-Speed?
The F93-20-01 runs at 175 RPM at low speed for stripping and scrubbing, and 320 RPM at high speed for spray buffing and finish maintenance. Both speeds are selected via a switch on the machine.
Why does the F93-20-01 use a DC rectified motor instead of AC?
DC rectified motors maintain flat torque at both speed settings without the RPM drop that AC two-speed motors exhibit under pad load. The F93-20-01 holds 175 RPM during stripping and 320 RPM during buffing regardless of pad resistance.
How loud is the Hawk Glide Freedom 2-Speed at each setting?
At 175 RPM the F93-20-01 measures 62 dB. At 320 RPM it measures 69 dB. Both settings are GS42 compliant and below OSHA's 85 dB 8-hour threshold.
What brush size does the F93-20-01 use?
The F93-20-01 uses a 19-inch brush, slightly wider than the 18-inch on the XHD model. This increases the effective cleaning path per pass on both stripping and buffing runs.
Can the Glide Freedom 2-Speed run a strip-and-buff cycle in one shift?
Yes. The F93-20-01 completes a stripping pass at 175 RPM and switches to 320 RPM for the spray buffing pass without changing machines. The DC motor performs stably at both settings in sequence.
What floor types does the F93-20-01 handle?
The F93-20-01 handles VCT, terrazzo, concrete, sheet vinyl, tile, and finished hardwood. Pad selection by task: black pads for stripping at 175 RPM, red or white pads for spray buffing at 320 RPM.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare