Abatement Predator PRED1200 Air Scrubber – 900 CFM 4-Stage HEPA, 3.5A

PRED1200 Variable-Speed HEPA Air Scrubber with 4-Stage Filtration and Daisy-Chain Power

The Abatement Technologies PRED1200 adjusts from 300 to 900 CFM, covering spaces up to 9,000 cubic feet at 6 air changes per hour. At maximum speed it draws only 3.5 amps — low enough to daisy-chain up to five units on a single 15-amp circuit. Four filtration stages (MERV4 coarse, MERV8 pleated, optional MERV7 carbon, true HEPA) extend HEPA filter life and address both particulate and VOC contamination in one machine.

PRED1200 Filtration Architecture and Power

• Stage 1 – MERV4 coarse pre-filter — captures large debris and extends the life of downstream stages; replaced during normal maintenance cycles without tools.
• Stage 2 – MERV8 pleated pre-filter — removes medium particles; the hinged rear access door with full-perimeter gasket seals against dirty-air bypass during filter changes.
• Optional Stage 3 – VAPOR-LOCK carbon filter (MERV7) — removes odors and VOCs from mold-damaged structures, fire restoration, and chemical-remediation sites.
• Stage 4 – True HEPA at 99.97% / 0.3 microns — long-life rated filter certified to UL 507 and CAN/CSA C22.2 No. 113.
• 3.5A draw, 5-unit daisy chain — run five PRED1200s from a single 15-amp breaker; critical on large jobsites with limited panel access.
• Upright or horizontal operation, 70 lbs — operates in either orientation to fit low-ceiling crawlspaces, confined HVAC rooms, and standard wall-adjacent placement.

PRED1200 Applications and Environments

Large-scale mold remediation contractors deploy multiple PRED1200 units in daisy-chain configurations across commercial office floors and multi-family residential buildings where circuit availability is limited. Fire-restoration companies use the VAPOR-LOCK carbon filter stage to address smoke and VOC contamination alongside particulate cleanup in the same unit. Water-damage restorers position PRED1200s in horizontal orientation inside crawlspaces and under-slab cavities where upright placement is impossible. Healthcare construction project managers use pairs of PRED1200s as the primary negative-air system on ICRA Category III projects in occupied hospital wings, where the 3.5A draw per unit avoids tripping branch circuits in older facility electrical infrastructure.

Specifications and Certification

What's in the Box

• F621 1" coarse particulate pre-filter (first stage)
• H502 2" pleated particulate pre-filter (second stage)
• H610C-99 HEPA filter, 99.97% @ 0.3 microns (final stage)
• PLUG10 foam inlet plug

Video

Documents

PRED1200 Owner's Manual

PRED1200 Data Sheet

PRED-1200 vs PRED-750: Sizing Up to the Right Predator

The PRED-1200 (300–900 CFM, 3.5 amps) covers larger commercial losses, multi-room category 3 water restoration, and warehouse-scale construction dust control where higher per-unit airflow reduces machine count. For residential containment, single-room mold remediation, or healthcare renovation cells where you need to daisy-chain multiple units on one circuit, the smaller PRED-750 (200–750 CFM, 1.9 amps) is the right tool — up to five PRED-750 units run on a single 15-amp circuit, versus four PRED-1200 units. Browse the full Abatement Technologies collection for replacement filters, ducting kits, and accessories.