NaceCare TVL 850/200T K-918291-C4B Ride-On Scrubber – 26"-34", 4×NX1K, 4 Hr

NaceCare TVL 850/200T K-918291-C4B – Ride-On Scrubber with 4×NX1K Batteries and Adjustable 26"–34" Path

The NaceCare TVL 850/200T (part number K-918291-C4B) upgrades the TVL 850 platform to four NX1K lithium phosphate batteries, delivering 4 hours of runtime versus the 3-hour 3-battery model. The same adjustable 26", 30", and 34" scrubbing widths, 160 lb brush pressure at 212 RPM, 32-gallon tanks, and 52,500 sq ft/hr coverage rate as the base model — with a full extra hour of cleaning time before recharge, allowing larger facilities to complete a full-shift cleaning run without mid-shift battery breaks.

TVL 850/200T 4×NX1K Battery Upgrade and Extended Shift Coverage

• 4×NX1K lithium phosphate batteries, 4-hr runtime: the additional NX1K cell extends shift coverage by 33% versus the 3-battery model — enough to add approximately 17,500 sq ft of cleaning coverage per shift.
• 10-hr full recharge time: with 4 NX1K cells, a full recharge takes 10 hours from depleted state; opportunity charging during breaks can extend effective working time across double-shift operations.
• 160 lb brush pressure at 212 RPM, 3×12" pop-on/pop-off brushes: same high-performance brush system as the 3-battery model, capable of daily maintenance scrubbing and periodic deep cleaning on the same machine.
• Three adjustable scrubbing widths — 26", 30", 34": one machine handles narrow corridors, standard aisles, and open floor sections without equipment changes.
• 600W traction motor: rear-wheel drive maintains traction on ramps and uneven floor transitions that would stall lower-powered drive systems.
• 32-gal solution / 32-gal recovery tanks: high-capacity matched tanks reduce refill interruptions across extended cleaning shifts.

Choosing Between the TVL 850/150T (3×NX1K) and TVL 850/200T (4×NX1K)

The primary difference between the two models is runtime — 3 hours versus 4 hours — and total weight: 704 lbs for the 3-battery model versus 728 lbs for the 4-battery model. Facilities with cleaning runs that complete within 3 hours save on upfront cost with the 150T. Facilities with continuous overnight cleaning schedules, large footprint buildings over 150,000 square feet, or double-shift cleaning operations benefit from the extra hour of run time in the 200T without mid-shift machine swaps or recharge interruptions.

TVL 850/200T LED Panel, Chemical Dispenser, and Safety Features

The LED control panel provides real-time display of battery status, water flow, brush pressure, and chemical level. The optional onboard chemical dispenser handles 32:1 to 128:1 dilution ratios automatically. A grounding strip prevents static discharge during operation in electronics or pharmaceutical warehouse environments. The tear-away squeegee system allows quick blade replacement without removing the full squeegee assembly.

Documents

Spec Sheet

Manual

Videos