Skip to content
Mi-T-M JCW-3003-2MHB Gasoline Belt Drive Pressure Washer – 3000 PSI, 3.0 GPM, Honda GX270

Mi-T-M JCW-3003-2MHB Gasoline Belt Drive Pressure Washer – 3000 PSI, 3.0 GPM, Honda GX270

Brand: Mi-T-MSKU: JCW-3003-2MHBIn Stock – Ready to Ship
$2,955.00
FREE SHIPPING – You save $200+ on freight

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay MastercardPayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – (978) 295-7538
Order before 5:00 PM EST for same-day dispatch. Estimated delivery:

Need help choosing? Talk to an expert

(978) 295-7538

Mi-T-M JCW-3003-2MHB: 3000 PSI Belt Drive Pressure Washer with Honda GX270

The Mi-T-M JCW-3003-2MHB steps up to a 270cc Honda GX270 OHV engine to produce 3000 PSI at 3.0 GPM — 9,000 cleaning units from a belt-drive AR pump. At 178 lbs net on 13-inch flat-free tires (larger than the GX200-powered models), it handles heavier cleaning tasks while maintaining job-site mobility. A Mi-T-M Pressure Relief Start unloader protects the pump at startup.

Honda GX270 Engine, 13-Inch Tires, and 3000 PSI AR Pump

  • 3000 PSI / 3.0 GPM — 9,000 cleaning units for heavy construction equipment, industrial machinery, and large-surface commercial cleaning
  • Honda GX270 OHV engine — 270cc displacement, step up from GX200 for higher sustained output demand
  • AR belt-drive pump — Mi-T-M Pressure Relief Start unloader allows engine startup under zero pressure load
  • 13-inch flat-free tires — larger than JCW-2403/2703 for stability on rough terrain and easier transport over obstacles
  • 50-foot × 3/8-inch non-marking hose — larger diameter than standard 1/4-inch hoses to sustain 3.0 GPM flow without pressure drop
  • Forged brass manifold — corrosion-resistant pump head rated for sustained high-pressure cycling
  • Powder-coated steel frame — two-piece belt guard protects drive components from debris and impact

Where 3000 PSI Belt Drive Is Specified: Industrial Cleaning and Heavy Contracting

Industrial cleaning contractors specify the JCW-3003-2MHB for tank and vessel exteriors, concrete loading docks, and structural steel cleaning between paint cycles. Municipalities use it for bridge cleaning, sidewalk restoration, and heavy graffiti removal on masonry. Agricultural processors wash grain bins, livestock facilities, and processing equipment where high-volume flow at 3.0 GPM speeds large-area cleaning. Construction demolition crews use it to strip concrete formwork and rinse equipment at end-of-shift.

Optional Bypass System, Compliance, and Documents

Not for sale in California — 49-state Honda GX270. Optional factory-order accessories include the CX-0005 Insulated Dual Lance (36-inch) for high/low pressure switching, and the CX-0082 or CX-0085 External Bypass System for pump protection in high-idle-time environments where sustained bypass heat is a concern.

PSI 3000
GPM 3.0
Engine 270cc Honda GX270 OHV
Pump AR (belt drive)
Unloader Mi-T-M Adjustable Pressure
Lance 36 in
Net Weight 178 lbs
Dimensions (L×W×H) 39.50 × 28.50 × 26.00 in

Spec Sheet | Manual

Product Warranty Information

"1 Year Unloader, 3 Year Honda Engine, 7 Year AR Pump"
Product Image
Added to cart
Mi-T-M JCW-3003-2MHB Gasoline Belt Drive Pressure Washer – 3000 PSI, 3.0 GPM, Honda GX270Mi-T-M JCW-3003-2MHB Gasoline Belt Drive Pressure Washer ...
View Cart

Frequently Asked Questions

What is the Mi-T-M Pressure Relief Start unloader?
The Pressure Relief Start unloader vents pump pressure to bypass at engine startup, allowing the Honda GX270 to reach operating RPM before encountering full hydraulic load. This reduces starter wear and makes pull-starting easier on cold mornings.
Why does the JCW-3003-2MHB have 13-inch tires versus 10-inch on smaller models?
The heavier GX270 engine and larger pump assembly shift the weight distribution and increase ground clearance requirements. The 13-inch flat-free tires improve stability and make it easier to roll over job-site obstacles like hoses, curbs, and uneven paving.
What is the external bypass system option for?
The optional CX-0082 or CX-0085 External Bypass System routes warm bypass water away from the pump inlet during extended idle periods. This prevents heat buildup when operators leave the trigger gun closed for minutes at a time — a common cause of pump seal failure.
Is the JCW-3003-2MHB for sale in California?
No. The 49-state Honda GX270 engine is not CARB-certified. California customers require a CARB-compliant engine variant — contact us for special-order availability.
Why is the hose 3/8-inch instead of 1/4-inch on this model?
At 3.0 GPM flow rate, a 1/4-inch hose would create excessive restriction and pressure drop across 50 feet. The 3/8-inch diameter maintains adequate flow volume to deliver rated GPM at the gun, supporting full cleaning performance across the entire hose length.
How many cleaning units does 3000 PSI / 3.0 GPM produce?
Cleaning units = PSI × GPM = 3,000 × 3.0 = 9,000 CU. This is 34% more cleaning power than the JCW-2403 (6,720 CU), making the JCW-3003 suited for heavy industrial and municipal applications.
What is included at delivery?
The JCW-3003-2MHB ships with four quick-connect nozzles (0°, 15°, 25°, 40°), a 50-foot × 3/8-inch non-marking hose, an insulated trigger gun, and a 36-inch lance.

Why Choose US Cleaning Tools?

See the price, buy now, get it fast. No quotes, no callbacks, no sales rep required.

  • No Quote Needed — All prices shown. Click buy, checkout, done.
  • Authorized Dealer — Brand-new units with full manufacturer warranty.
  • Trusted by 10,000+ Facilities — Schools, warehouses, contractors nationwide.
  • Expert Support — Real specialists at (978) 295-7538.
  • Fast Shipping — Trackable delivery in 2–8 business days.
  • USA-Built in Iowa — Mi-T-M is 100% Employee-Owned. Manufactured in Peosta, IA since 1971.
  • Up to 7-Year Pump Warranty — Industrial AR or General triplex pumps. 3-yr frame, 1-yr coil.
  • Commercial-Grade Engineering — Roll-cage frames, powder-coat finish, premium engines (Honda, Kohler, Vanguard).

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

― Easy and convenient payment ―
Ach Direct Debit Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay USDC Visa
― Verified security ―
✔ Secure payment    ✔ 30-day return policy    ✔ Data protection

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare