Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Mi-T-M HG-3004-1208 Natural Gas Hot Water Pressure Washer – 3000 PSI, 3.9 GPM, 208V/1PH
Ships from US manufacturer with factory warranty
Need help choosing? Talk to an expert
+1 (978) 295-7538Single-Phase Natural Gas Heat for Shops Without Three-Phase Service
The Mi-T-M HG-3004-1208 is a natural gas hot water pressure washer that delivers 3,000 PSI at 3.9 GPM for stationary, high-volume cleaning. It heats wash water with a 338,000 BTU per hour natural gas burner and runs on an 8.0 HP electric motor wired for 208V Single-Phase power. Built for fixed wash bays, fleet shops, and food or agricultural facilities with a steady fuel supply, it combines the grease-cutting power of hot water with the low running cost of piped natural gas.
208V Single-Phase Power and 8.0 HP Motor
The HG-3004-1208 runs on an 8.0 HP open drip-proof electric motor with thermal overload protection, wired for 208V Single-Phase service. A 24-volt control system separates the operator controls from line voltage. Single-phase wiring lets the unit run in shops that do not have three-phase service at the panel. Because the motor is electric rather than gas, the unit produces no engine exhaust and can run indoors where engine-driven washers cannot.
338,000 BTU Natural Gas Burner and Schedule 80 Coil
Heat comes from a natural-draft, aspirating-type burner rated at 338,000 BTU per hour on natural gas or 326,000 BTU per hour on LP vapor, vented through a 10-inch stack. Water passes through a half-inch Schedule 80 coil heat exchanger and reaches a maximum outlet temperature of 200 degrees F, or 250 degrees F with the HX-0121 steam upgrade. Electronic ignition with an intermittent pilot fires the burner only on demand, and a thermal relief valve protects the pump during bypass.
General Belt-Drive Pump and Included Accessories
A General belt-drive pump with a factory-preset unloader and an adjustable high-pressure detergent injector drives the system, backed by a 7-year pump warranty alongside a 3-year coil and 1-year motor warranty. The stationary frame and side panels are powder-coated steel. Each unit ships with a 50-foot, three-eighths-inch steel wire-braided hose with quick connects, an insulated trigger gun with safety lock-off, an adjustable insulated dual lance, and 0, 15, 25, and 40 degree quick-connect nozzles. The HG-3004-1208 is CSA certified for use from 0 to 2,000 feet above sea level.
Specifications
| Model | HG-3004-1208 |
| Maximum Pressure | 3,000 PSI |
| Flow Rate | 3.9 GPM |
| Pump | General belt-drive, factory-preset unloader |
| Motor | 8.0 HP open drip-proof, thermal overload |
| Electrical | 208V, Single-Phase |
| Fuel | Natural gas (convertible to LP vapor) |
| Burner Output | 338,000 BTU/hr natural gas, 326,000 BTU/hr LP |
| Max Outlet Temperature | 200°F (250°F with steam option) |
| Heat Exchanger | 1/2-inch Schedule 80 coil |
| Ignition | Electronic, intermittent pilot, 24V controls |
| Certification | CSA, 0 to 2,000 ft elevation |
| Warranty | 1 yr motor, 3 yr coil, 7 yr pump |
| Pressure | 3000 PSI |
|---|---|
| Flow Rate | 3.9 GPM |
| Water Temp | Hot |
Manufacturer's Warranty
This product comes with a full manufacturer's warranty. All warranty claims are handled directly by the manufacturer.
For specific warranty details, please contact us at +1 (978) 295-7538 or email info@uscleaningtools.com
B2B & Tax-Exempt Purchases
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
- Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
- We verify your certificate and mark your account tax-exempt — usually within one business day.
- Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus the non-refundable payment processing fee (2.9% + $0.30), so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
Frequently Asked Questions
Parts & Accessories That Fit the Mi-T-M HG-3004-1208 Natural Gas Hot Water Pressure Washer
Confirmed-fit wear parts and accessories for this machine. Not sure which you need? Call 9782957538.
| Part or accessory | SKU |
|---|---|
| Mi-T-M AW-7500-0045 Pressure Washer Nozzle – Acc-Rotate 6000psi #4.5 | AW-7500-0045 |
| Mi-T-M AW-7510-0045 Pressure Washer Nozzle – Acc-Rotate 5100psi #4.5 | AW-7510-0045 |
Compare products
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
