Skip to content
Mi-T-M CM-4200-0MMB Gasoline Pressure Washer – 4200 PSI, 3.4 GPM, 14280 CU

Mi-T-M CM-4200-0MMB Gasoline Pressure Washer – 4200 PSI, 3.4 GPM, 14280 CU

Brand: Mi-T-MSKU: CM-4200-0MMBIn stock
$1,498.00

Ships from US manufacturer with factory warranty

Request a quote / purchase order

Tell us your quantity, delivery ZIP code and required date. For help choosing equipment, include your application.

Email a quote request Call (978) 295-7538
Planning around a job date? Confirm current availability and delivery timing with us before ordering.
Authorized Mi-T-M dealerGenuine Mi-T-M equipment with full factory warranty support
Tax-exempt & PO acceptedSend your exemption certificate and we bill without sales tax
30-day returnsUnused equipment in original packaging, within 30 days
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa

Need help choosing? Talk to an expert

+1 (978) 295-7538

CM-4200-0MMB Gas Pressure Washer — 4200 PSI ChoreMaster for Heavy Equipment Washing

Cold water only; for grease and petrochemical removal, pair it with a chemical injector and appropriate detergent.

CM-4200-0MMB Cleaning Power and Engine Comparison

  • 4,200 PSI at 3.4 GPM (14,280 CU) — handles concrete stripping, fleet washing, and rust removal tasks that require sustained high pressure over large surface areas
  • Mi-T-M crankshaft pump — commercial-duty triplex design; brass manifold, thermal relief valve, in-line water strainer standard
  • Adjustable pressure unloader — allows pressure reduction for vehicle washing and painted surfaces without nozzle changes
  • 10-inch flat-free tires — stable on gravel lots, construction debris, and loading dock surfaces
  • Mi-T-M Pressure Relief Start — reduces compression during pull-starting; easier cold starts on heavy-displacement engines

CM-4200-0MMB Applications and Environments

Fleet maintenance operations washing semi-trucks, trailers, and heavy equipment will find the CM-4200-0MMB sustains the output needed for full-vehicle washing without the duty-cycle limitations of a smaller engine. Construction contractors use it for post-pour concrete form cleaning and foundation prep where cured concrete residue requires maximum PSI. Municipalities and county road departments running equipment wash stations keep these units for seasonal cleaning of plow trucks, road graders, and utility vehicles. The 142 lb unit fits a standard job trailer but requires a minimum two-person loading.

CM-4200-0MMB GPM, PSI, and Nozzle Configuration

Rated at 3.4 GPM at 4,200 PSI (14,280 cleaning units) at rated flow. Includes 15°, 25°, and detergent quick-connect nozzles; 50-foot × 3/8-inch wire-braided hose; 36-inch two-piece lance with trigger gun. Cold water only.

Specifications

PSI 4,200 PSI at rated flow
GPM 3.4 GPM
Cleaning Units 14,280 CU (PSI × GPM)
Engine 420cc Mi-T-M OHV
Pump Type Mi-T-M Crankshaft
Unloader Adjustable Pressure
Hose 50 ft × 3/8 in wire-braided
Nozzles Included 15°, 25°, detergent
Net Weight 142 lbs
Dimensions (L × W × H) 40 × 22.5 × 24.5 in
Hot/Cold Cold water only
California Sale Not for sale in CA (non-CARB); consult factory
Pump Mi-T-M, Crankshaft
Shipping Weight 192.00 lbs.
Warranty 1 Year Mi-T-M Pump, 3 Year Mi-T-M Engine

Documents

Spec Sheet
Manual

Pressure4200 PSI
Flow Rate3.4 GPM
Water TempCold

Product Warranty Information

Pump1 year
Engine3 years

Warranty claims go through the manufacturer. Questions about coverage? Call +1 (978) 295-7538 or email info@uscleaningtools.com.

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus a non-refundable payment processing fee, which may apply, so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Mi-T-M CM-4200-0MMB Gasoline Pressure Washer – 4200 PSI, 3.4 GPM, 14280 CUMi-T-M CM-4200-0MMB Gasoline Pressure Washer – 4200 PSI, ...
View Cart
$1,498.00

Frequently Asked Questions

What cleaning surfaces is the CM-4200-0MMB rated for?
At 4,200 PSI and 14,280 cleaning units, this unit handles concrete stripping, cured form release agent removal, heavy equipment washing, and rust-stained masonry. For delicate surfaces, reduce pressure with the adjustable unloader and use the 25° nozzle.
Can the CM-4200-0MMB run a surface cleaner attachment?
Yes — the 420cc engine and crankshaft pump are sized to handle surface cleaner attachments without load drop. Most 15–18 inch surface cleaners designed for 4,000+ PSI machines will work. Ensure the surface cleaner's flow rating does not exceed 3.4 GPM.
What is the unloader type and how do I adjust pressure?
The CM-4200-0MMB uses an adjustable pressure unloader. Turn the adjustment knob clockwise to increase pressure, counterclockwise to decrease. Always adjust with the engine running and the trigger pressed to flow water — never adjust dry.
Is a 0° nozzle included?
No — the included nozzles are 15°, 25°, and detergent. A 0° (zero-degree) pinpoint nozzle is not included. Mi-T-M sells compatible quick-connect 0° nozzles separately; use with caution on soft surfaces as 4,200 PSI through a 0° nozzle can etch concrete and damage wood.

Parts & Accessories That Fit the Mi-T-M CM-4200-0MMB Gasoline Pressure Washer

Confirmed-fit wear parts and accessories for this machine. Not sure which you need? Call 9782957538.

How the Mi-T-M CM-4200-0MMB Gasoline Pressure Washer Compares to Other Mi-T-M pressure washers

The closest 5 models from the 159 Mi-T-M pressure washers we carry, by capacity. Not sure which size fits the job? Call +1 (978) 295-7538.

ModelPressureFlowWaterPrice
Mi-T-M HSE-4004-0M10 Hot Water Pressure Washer4,000 PSI3.5 GPMHot$9,190
Mi-T-M HSE-4004-0M30 Hot Water Pressure Washer4,000 PSI3.5 GPMHot$8,198
Mi-T-M CM-4200-0MMB Gasoline Pressure Washer— this model4,200 PSI3.4 GPMCold$1,498
Mi-T-M WP-4200-0MHB Gasoline Pressure Washer4,200 PSI3.4 GPMCold$1,780
Mi-T-M WP-4200-0MKB Gasoline Pressure Washer4,200 PSI3.4 GPMCold$1,792

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare