CA-3003-1MAM Gas Pressure Washer — CA Aluminum Series 3000 PSI with Mi-T-M OHV Engine
The CA-3003-1MAM produces 3000 PSI at 3.0 GPM — 9,000 cleaning units — from a 300cc Mi-T-M OHV engine paired with an AR crankshaft pump on Mi-T-M's 105-lb aluminum frame. It is one of three engine variants on the CA-3003 chassis alongside the Honda GX270 (1MAH) and Kohler CH395 (1MAK). The Mi-T-M OHV suits buyers who prefer a single-brand support relationship — both engine and pump under Mi-T-M's dealer network — or who operate fleets where uniform engine parts across multiple Mi-T-M washers simplifies the parts shelf. ETL listed for US commercial use.
CA-3003-1MAM Single-Brand Support and Output Specifications
The 300cc Mi-T-M OHV is the largest displacement in Mi-T-M's OHV engine family and the appropriate choice for sustaining 3000 PSI / 3.0 GPM under extended load. With engine and pump both serviced through Mi-T-M's authorized dealer network, warranty claims, parts orders, and technical support flow through one contact. The 9,000 CU output handles heavy equipment fouling and fleet washing that exceeds the capacity of the CA-2703 series (6,480 CU).
3000 PSI at 3.0 GPM (9,000 CU) — 39% more cleaning power than the CA-2703 series; covers heavy fleet washing, equipment cleaning, and construction site applications
300cc Mi-T-M OHV engine — largest Mi-T-M OHV displacement; engine and pump supported by same dealer network for single-source warranty and parts
AR crankshaft pump, forged brass manifold, thermal relief valve — AR rated for sustained 3000 PSI commercial-duty use; thermal valve protects pump during trigger-closed idle
105-lb corrosion-resistant aluminum frame, vibration isolation plate — lighter than comparable steel-frame units; vibration plate extends pump seal service life
36-in lance with insulated trigger gun — insulated gun protects operator hand from pressure-induced heat during extended use
CA-3003-1MAM Applications and Environments
Fleet operators running multiple Mi-T-M pressure washers use the CA-3003-1MAM to standardize engine parts across their equipment: one oil specification, one air filter cross-reference, one parts supplier for all units. Construction contractors apply the 9,000 CU output to concrete form cleaning, masonry surface prep, and equipment cleaning between job sites. Industrial plants use it for production equipment washdown between runs involving cutting oils, coolants, and process chemicals. Property restoration companies apply it to building facades before recoating. Mobile cleaning businesses with Mi-T-M dealer relationships find consolidated warranty handling reduces downtime compared to managing multiple engine brand claims.
CA-3003-1MAM GPM, PSI, and Nozzle Configuration
Rated at 3.0 GPM at 3000 PSI (9,000 cleaning units) at rated flow. Includes quick-connect nozzles in 0°, 15°, and 25° patterns; 50-ft × 3/8-in non-marking high-pressure hose; 36-in lance with insulated trigger gun. Cold water only. 49-state engine — not for sale in California.
"1 Year Unloader, 3 Year Honda Engine, 7 Year Pump"
B2B & Tax-Exempt Purchases
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
We verify your certificate and mark your account tax-exempt — usually within one business day.
Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships for a full 100% refund.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
What is the single-brand advantage of the CA-3003-1MAM?
The CA-3003-1MAM uses a 300cc Mi-T-M OHV engine, which means both the engine and the AR pump are covered by Mi-T-M's authorized dealer network. This consolidates warranty claims, parts sourcing, and technical support to a single contact — compared to the 1MAH (Honda engine + Mi-T-M pump = two service relationships) or 1MAK (Kohler engine + Mi-T-M pump = two service relationships).
How does the CA-3003-1MAM's 300cc Mi-T-M OHV compare to the Honda GX270 (270cc) in displacement?
The Mi-T-M OHV at 300cc is 11% larger displacement than the Honda GX270 at 270cc. Both maintain rated 3000 PSI / 3.0 GPM (9,000 CU) output under normal conditions. The additional displacement provides a slightly larger torque reserve when operating at high ambient temperatures or under sustained heavy load.
Does the CA-3003-1MAM have ETL listing?
Yes. The CA-3003-1MAM is ETL listed. This independent certification from Intertek confirms the unit meets applicable US safety standards and is accepted by local inspection authorities for commercial equipment use.
What is the cleaning power difference between the CA-3003-1MAM and the CA-2703-1MMM?
The CA-3003-1MAM produces 3000 × 3.0 = 9,000 CU. The CA-2703-1MMM produces 2700 × 2.4 = 6,480 CU. The CA-3003 delivers 39% more cleaning power. The CA-3003 also weighs 105 lbs versus 73 lbs — a 32-lb difference from the larger engine and AR pump. If your work involves heavy equipment fouling, the CU increase outweighs the weight penalty for most operations.
Can the CA-3003-1MAM be sold in California?
No. The 300cc Mi-T-M OHV is a 49-state engine that does not meet California CARB small engine emissions standards. The CA-3003-1MAM cannot be sold or registered in California.
What bypass accessory is recommended for the CA-3003-1MAM?
Mi-T-M recommends the CX-0099 External Bypass System for the CA-3003 series. Unlike the CX-0097 used on the CA-2403 and CA-2703 models, the CX-0099 is rated for the higher flow demands of the AR pump at 3.0 GPM. It allows additional water to flow through the pump when the trigger is closed, preventing heat damage to pump seals and valves.
Frequently Asked Questions
1. What payment methods can I use?
We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.
2. When will my payment be processed?
Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.
3. Will I receive an order confirmation?
Yes, a confirmation email will be sent to the provided email address once the order is placed.
4. How long does it take to process an order?
Orders are processed within 1-2 business days and then prepared for shipment.
5. How long does it take for my order to arrive?
Estimated arrival time (ETA) is 5-7 business days for all orders.
6. Do you offer warranty?
All our products come with a manufacturer warranty of at least 1 year, depending on the brand.
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
