CA-2703-1MMV Gas Pressure Washer — CA Aluminum Series 2700 PSI with Vanguard OHV
The CA-2703-1MMV produces 2700 PSI at 2.4 GPM — 6,480 cleaning units — from a 203cc Briggs and Stratton Vanguard OHV engine on Mi-T-M's 73-lb aluminum frame. It is one of four engine variants on the CA-2703 chassis; all produce the same output from the same pump and frame. The Vanguard engine is the choice for buyers whose facility or fleet already runs Vanguard-powered equipment, whose regional dealer offers preferred Vanguard service rates, or who are consolidating to a single engine platform across multiple equipment categories including generators, sweepers, or turf equipment.
CA-2703-1MMV Engine Selection and Aluminum Frame Advantage
The 203cc Vanguard OHV uses a cast-iron sleeve, overhead valve configuration, and pressure-lubricated bearings — the same core durability features found in commercial Vanguard engines used across a range of industrial equipment. The 73-lb aluminum frame with patented vibration isolation plate, Mi-T-M crankshaft pump, and accessory set are identical across all CA-2703 variants.
2700 PSI at 2.4 GPM (6,480 CU) — 12.5% more cleaning power than the CA-2403 on the same frame weight; handles dense fouling on equipment, vehicles, and building surfaces
203cc Vanguard OHV engine — commercial-duty construction; Briggs and Stratton Vanguard dealer network covers most US markets
73-lb corrosion-resistant aluminum frame — one-person portability; resists corrosion in coastal storage and wash-down environments
Mi-T-M crankshaft pump, forged brass manifold, thermal relief valve — sustained operation design; brass handles mineral-rich water without scaling
Patented vibration isolation plate — absorbs Vanguard engine vibration before transfer to pump assembly
50-ft hose, 36-in lance, flat-free tires — complete ready-to-use configuration; no maintenance tires for job-site terrain
CA-2703-1MMV Applications and Environments
Facilities and contractors operating Vanguard-powered generators, floor sweepers, or line stripers use the CA-2703-1MMV to unify their engine platform: one parts supplier, one service technician, one engine oil specification across their equipment inventory. Mobile cleaning contractors choose it when their regional Vanguard dealer provides faster service than Honda or Kohler alternatives. Agricultural producers who already run Vanguard equipment for other operations extend the same parts shelf to their pressure washer. Property management companies use the aluminum frame's low weight to carry the unit between floors and areas without dollies.
CA-2703-1MMV GPM, PSI, and Nozzle Configuration
Rated at 2.4 GPM at 2700 PSI (6,480 cleaning units) at rated flow. Includes quick-connect nozzles in 0°, 15°, and 25° patterns; 50-ft × 3/8-in non-marking high-pressure hose; 36-in lance with insulated trigger gun. Cold water only. 49-state engine — not for sale in California.
"1 Year Unloader, 3 Year Honda Engine, 7 Year Pump"
B2B & Tax-Exempt Purchases
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
We verify your certificate and mark your account tax-exempt — usually within one business day.
Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships for a full 100% refund.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
Why would a buyer choose the Vanguard OHV (1MMV) over the Honda GX200 (1MMH) on the CA-2703?
Both produce identical 2700 PSI / 2.4 GPM (6,480 CU) from the same 73-lb aluminum frame. Choose 1MMV if your operation already runs Briggs and Stratton Vanguard engines in other equipment — generators, sweepers, or turf equipment — consolidating parts, fluids, and service to one engine platform reduces procurement and maintenance overhead.
What does the Vanguard OHV engine specification mean for durability?
The 203cc Vanguard OHV uses a cast-iron cylinder sleeve, overhead valve configuration, and pressure-lubricated main bearings. These are the same construction features found in commercial Vanguard engines rated for high-hour industrial applications. Overhead valves run cooler and more efficiently than side-valve designs at sustained operating loads.
Does the CA-2703-1MMV have ETL listing?
The Vanguard variant (1MMV) is not listed with ETL certification in the product specifications, unlike the Honda (1MMH) and Kohler (1MMK) variants which carry ETL listing. Buyers requiring ETL certification for facility procurement should select the 1MMH or 1MMK variant.
What is the cleaning unit output of the CA-2703-1MMV and how does it compare to the CA-3003?
The CA-2703-1MMV produces 2700 × 2.4 = 6,480 CU. The CA-3003 series produces 3000 × 3.0 = 9,000 CU — 39% more cleaning power. The CA-3003 also weighs 105 lbs versus 73 lbs for the CA-2703. If your work involves sustained heavy equipment cleaning, the CA-3003 is meaningfully more effective; for lighter commercial cleaning the CA-2703's weight advantage may outweigh the output difference.
Can the CA-2703-1MMV be sold in California?
No. The 203cc Vanguard OHV is a 49-state engine that does not comply with California CARB small engine emissions standards. It cannot be sold or registered in California.
What accessories are included with the CA-2703-1MMV?
The CA-2703-1MMV includes three quick-connect nozzles (0°, 15°, 25°), a 50-ft × 3/8-in non-marking hose, a 36-in lance, and an insulated trigger gun. Optional: CX-0005 Insulated Dual Lance (36 in, switches between high and low pressure) and CX-0097 External Bypass System (protects pump from heat build-up during idle).
Frequently Asked Questions
1. What payment methods can I use?
We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.
2. When will my payment be processed?
Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.
3. Will I receive an order confirmation?
Yes, a confirmation email will be sent to the provided email address once the order is placed.
4. How long does it take to process an order?
Orders are processed within 1-2 business days and then prepared for shipment.
5. How long does it take for my order to arrive?
Estimated arrival time (ETA) is 5-7 business days for all orders.
6. Do you offer warranty?
All our products come with a manufacturer warranty of at least 1 year, depending on the brand.
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
