Skip to content
Mi-T-M AM2-SH09-30ME 30-Gal Two-Stage Gasoline Compressor – Electric Start, 17.2 CFM

Mi-T-M AM2-SH09-30ME 30-Gal Two-Stage Gasoline Compressor – Electric Start, 17.2 CFM

Brand: Mi-T-MSKU: AM2-SH09-30MEAvailable to order
$3,281.00
Free shipping on this item

Ships from US manufacturer with factory warranty

Request a quote / purchase order

Tell us your quantity, delivery ZIP code and required date. For help choosing equipment, include your application.

Email a quote request Call (978) 295-7538
Planning around a job date? Confirm current availability and delivery timing with us before ordering.
Authorized Mi-T-M dealerGenuine Mi-T-M equipment with full factory warranty support
Tax-exempt & PO acceptedSend your exemption certificate and we bill without sales tax
30-day returnsUnused equipment in original packaging, within 30 days
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Venmo Visa

Need help choosing? Talk to an expert

+1 (978) 295-7538

Mi-T-M AM2-SH09-30ME: 30-Gallon Two-Stage Gasoline Compressor with Electric Start

The Mi-T-M AM2-SH09-30ME adds electric start capability to the proven AM2 two-stage platform. Powered by a 270cc Honda GX270 OHV engine producing 17.2 CFM at 175 PSI, this 30-gallon ASME tank unit weighs 490 lbs net — heavier than the base -30M due to the electric start hardware already installed. Battery and cables are not included and must be ordered separately.

Electric Start and Two-Stage Pump Details on the AM2-SH09-30ME

  • Electric start pre-installed — eliminates pull-cord effort for daily startup in shop or fleet environments
  • Honda GX270 OHV engine — 270cc displacement with commercial-grade durability and parts availability
  • 17.2 CFM @ 175 PSI — sustained two-stage output for spray guns, impact wrenches, and air-operated lifts
  • Two-stage cast iron pump — inter-stage cooling reduces heat buildup during extended run cycles
  • Stainless-steel braided discharge hose — rated for high-pressure output without abrasion wear
  • Pneumatic idle control — auto-throttles at set pressure to reduce fuel use and engine hours
  • 150-PSI maximum rated regulator — allows output pressure tuning for different tool requirements

Where Electric Start Matters: Fleet Shops and Daily-Use Stations

Electric start is most valued in fleet maintenance facilities, auto dealership service bays, and rental equipment yards where compressors start and stop multiple times per shift. Manufacturing floor stations benefit from push-button startup that doesn't require technician strength or proximity to the recoil. Mobile service units with generator integration can connect directly to the electric start circuit for remote activation.

Optional Upgrades and What Ships

The AM2-SH09-30ME ships with electric start wiring pre-installed but without a battery. The optional AX-0017 kit adds a sealed battery, tray, box, and cables for a complete installation. The AX-0077 Battery Box/Tray and AX-0105 Remote Start/Choke (7-ft sealed cable) are also available as factory-order options for remote key-switch control.

CFM @ PSI 17.2 @ 175
Engine 270cc Honda GX270 OHV
Tank Size 30 gallons
Start Type Electric (battery not included)
Net Weight 490 lbs
Dimensions (L×W×H) 40.50 × 17.50 × 44.50 in

Spec Sheet | Manual

Product Warranty Information

"2 Year Pump Exchange, 3 Year Honda Engine"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus the non-refundable payment processing fee (2.9% + $0.30), so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Mi-T-M AM2-SH09-30ME 30-Gal Two-Stage Gasoline Compressor – Electric Start, 17.2 CFMMi-T-M AM2-SH09-30ME 30-Gal Two-Stage Gasoline Compressor...
View Cart
$3,281.00

Frequently Asked Questions

Does the AM2-SH09-30ME come with a battery for the electric start?
No. The unit ships with the electric start wiring pre-installed, but the battery is not included. The optional AX-0017 kit adds the sealed battery, tray, box, and cables needed for a complete installation.
What is the difference between the AM2-SH09-30M and AM2-SH09-30ME?
The -30ME adds electric start hardware, increasing the net weight to 490 lbs versus 376 lbs for the manual-start -30M. Output specs — 17.2 CFM at 175 PSI — are identical on both models.
Can I add remote start to the AM2-SH09-30ME?
Yes. The AX-0105 Remote Start/Choke with 7-foot sealed cable is a factory-order option that allows a key switch to be mounted away from the unit, such as in a truck cab.
What does the 150-PSI rated regulator control?
The regulator allows you to set downstream working pressure up to 150 PSI, letting you match output to tool specifications rather than running tools at full tank pressure.
How often does the cast iron pump need oil changes?
Mi-T-M recommends checking oil level before each use via the sight indicator and changing oil after the first 20 hours, then every 200 hours thereafter under normal commercial use conditions.
What moisture control options are available?
The optional AX-0003 Manual Drain/Regulator/Metal Bowl upgrade installs inline to separate condensate from compressed air before it reaches your tools and hoses.
Is the removable base plate included?
Yes. A removable base plate ships with the unit, enabling direct floor mounting or skid integration on service trucks and enclosed trailers.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare