Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST






Delfin Pro HEPA 10 HV105 Dry HEPA Vacuum – 10 Gal, 110 CFM, 50 Ft Cord
Ships from US manufacturer with factory warranty
Need help choosing? Talk to an expert
+1 (978) 295-7538Pro HEPA 10 HV105 — 10-gallon dry HEPA vacuum for asbestos and lead work
The Pro HEPA 10 is the dry pick-up machine in Delfin's Pro HEPA line, built around a 2 HP two-stage bypass motor and a certified HEPA filter for crews collecting asbestos debris, lead dust and construction fines. A 10-gallon blow-molded tank on four plate casters keeps the footprint small enough to work a single room, and the 50-foot cord covers a floor plate without hunting for the next outlet. Compared with the 6-quart backpack in the same line, the HV105 gives up wearability for more than six times the tank volume and a stronger two-stage bypass motor.
Delfin HV105 filtration, tank and power layout
On a dry abatement machine, the filter sequence and the tool-triggered outlet do most of the work.
- Tested and certified HEPA filter — 99.97% efficiency at 0.3 microns, with a Dacron filter bag, spacer sleeve and polyester pre-filter upstream so the HEPA element is not the first thing to load up
- Disposable synthetic filter bag — collected material leaves the machine inside the bag, which keeps the operator out of the debris during disposal
- Auxiliary 115 V outlet on the motorhead — the switch has a tool position, so plugging a sander or grinder into the outlet runs the vacuum whenever the tool runs and dust is captured at the source
- 2 HP two-stage bypass motor — 110 CFM and 105 inches of water lift, with self-cooling airflow that keeps motor temperature down through long runs
- Blow-molded tank on four plate casters — stays stable when it is full and takes knocks that dent a steel drum
- 50-foot power cord — one outlet covers a large bay, a corridor run or a full apartment turn
- Five tools in the box — hose, two-piece steel wand, floor tool, crevice tool and round dust brush
Pro HEPA 10 applications and environments
Abatement and restoration contractors run the HV105 on asbestos and lead-paint cleanup, where Delfin rates the filter for hazardous material collection and the machine exceeds the EPA RRP rule for lead dust recovery. Drywall and concrete crews connect it to sanders and grinders through the motorhead outlet to capture dust at the tool instead of sweeping it up afterward. Facility maintenance teams in warehouses, food plants and school districts use it for overhead cleaning of beams, pipe runs and light fixtures, since the 1.5-inch inlet takes standard wands and the tank rolls between rooms on its own casters. It is a dry-only machine: liquids belong in the wet/dry Pro HEPA 20.
Specifications
| Model | HV105 (Pro HEPA 10) |
| Voltage | 115 V / 60 Hz, single phase |
| Motor | 2 HP, 2-stage bypass, commercial grade |
| Max Water Lift | 105 in H2O |
| Max Airflow | 110 CFM |
| Suction Inlet | 1.5 in |
| Recovery Capacity | 10 gallons |
| Application | Dry pick-up only |
| Collection | Disposable synthetic (Dacron) filter bag, spacer sleeve, polyester pre-filter |
| Filtration | Tested and certified HEPA filter, 99.97% at 0.3 microns |
| Tank | Blow-molded, four plate casters |
| Auxiliary Outlet | 115 V on motorhead |
| Power Cord | 50 ft |
| Noise Level | 66 dB(A) |
| Weight | 38 lbs |
| Compliance | Exceeds EPA RRP rule for lead dust recovery |
| Included Tools | Hose, two-piece steel wand, round dust brush, floor tool, crevice tool |
Documents
| Type | Other |
|---|---|
| Power | Corded |
| Capacity | 40.0 qt |
| Airflow | 110 CFM |
| HEPA Filtration | Yes |
Manufacturer's Warranty
This product comes with a full manufacturer's warranty. All warranty claims are handled directly by the manufacturer.
For specific warranty details, please contact us at +1 (978) 295-7538 or email info@uscleaningtools.com
B2B & Tax-Exempt Purchases
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
- Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
- We verify your certificate and mark your account tax-exempt — usually within one business day.
- Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus the non-refundable payment processing fee (2.9% + $0.30), so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
Frequently Asked Questions
Compare products
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}