AllerAir AirMedic Pro 6 Ultra Air Purifier – 32 lb Carbon, Super HEPA

The AllerAir AirMedic Pro 6 Ultra is the highest-carbon-capacity portable air purifier for severe MCS (multiple chemical sensitivity), post-renovation off-gassing, and industrial chemical exposure — 31 to 34 pounds of activated carbon in a 5-inch deep bed, paired with Super HEPA filtration at 99.99% to 0.1 microns. Covers up to 1,800 sq ft. Manufactured in Canada with a 10-year warranty.

AirMedic Pro 6 Ultra — 34 lb Carbon at Maximum Depth for Severe MCS and Industrial Applications

The Ultra is AllerAir's highest-capacity configuration — 31–34 lbs of activated carbon in a 5"-deep bed with 4,500 acres of surface area, combined with Super HEPA at 99.99% efficiency at 0.1 microns. The 5" carbon depth is the deepest in the Pro 6 line — more depth means longer contact time between air and carbon media, removing lower-concentration contaminants the shallower beds miss. Where the standard Pro 6 uses a 2.5" bed (17 lbs) and the HD uses a 3.5" bed (26–29 lbs), the Ultra doubles the depth to 5" at 31–34 lbs.

AirMedic Pro 6 Ultra Carbon Depth and Filtration Capacity

Carbon bed depth is the single most important differentiator in gas-phase air purification — deeper bed means longer air-carbon contact time, which translates directly to removal efficiency for lower-concentration contaminants.

• 31–34 lbs activated carbon (5" bed) — Exec blend: 31–33 lbs; Vocarb blend: 32–34 lbs; 2× the depth of the standard Pro 6 and 43% deeper than the HD
• 4,500 acres carbon surface area — maximum adsorption capacity for VOCs, formaldehyde, chlorine compounds, ammonia, and industrial chemical gases
• Super HEPA at 99.99% efficiency (0.1 microns) — same Super HEPA grade as the HD, capturing ultrafine particles and virus-range particulates
• 560 CFM variable speed motor — 39 dB at low; same airflow platform as Pro 6 and Pro 6 HD
• 40+ carbon blend options — Exec, Vocarb, or custom formulations for specific industrial chemical environments
• CSA/UL certified — safe for continuous operation in occupied spaces on standard 115V or 230V

AirMedic Pro 6 Ultra Applications and Environments

Individuals with severe MCS who require maximum carbon capacity between filter changes are the primary buyer — the Ultra's 5" bed provides the longest service interval and highest chemical removal efficiency in the Pro 6 line. Industrial laboratories and chemical processing areas with active high-concentration chemical off-gassing use it where the HD model's 3.5" bed cannot sustain acceptable air quality between filter changes. Fire and smoke restoration projects with heavy chemical contamination from combustion byproducts (aldehydes, carbon compounds, acrolein) benefit from the Ultra's maximum adsorption capacity. New building off-gassing where multiple materials release simultaneously — flooring, paint, cabinetry, adhesives — overwhelms smaller carbon beds more quickly; the Ultra's 4,500-acre surface area handles simultaneous multi-contaminant loads more effectively.

AirMedic Pro 6 Ultra CADR Rating and Filter Stack

The Ultra uses the same three-stage architecture (pre-filter, carbon main bed, Super HEPA) as the HD, but with a 5" carbon bed instead of 3.5". CSA/UL certified. Operating weight: 58 lbs — 6 lbs heavier than the standard Pro 6 due to the additional carbon. Available in Black, Sandstone, and White. If your application is moderate chemical sensitivity or VOC removal in a standard office or residential setting, the standard Pro 6 (17 lbs) or Plus (21–24 lbs) will likely serve you at lower filter replacement cost; the Ultra is for high-demand environments where maximum capacity justifies the investment.

Specifications

Documents

AirMedic Pro 6 Series Owner's Manual (PDF)