Abatement Technologies HCNC1001 ICRA Dust Barrier – 6-Mil, 12x100 ft, Flame Retardant

HCNC1001 — ICRA-Compliant 6-Mil Containment Barrier for Healthcare Construction Zones

The Abatement Technologies HCNC1001 is a 6-mil low-density polyethylene containment barrier printed with ICRA compliance instructions for immediate zone identification. Each 12 × 100 ft roll delivers 1,200 sq. ft. of anti-static, flame-retardant coverage that meets ASTM E84, NFPA Class A, and NFPA 701 safety standards — required in any active hospital or clinic undergoing renovation.

HCNC1001 Material Properties and Certifications

• 6-mil anti-static polyethylene — reduces dust attraction compared to standard poly film; ±10% thickness tolerance.
• Flame-retardant rated — meets ASTM E84, UBC Class 1, NFPA Class A, NFPA 701 large-scale, and California Administrative Code Title 19 Section 1237.1.
• Flash point 600°F — significantly above typical construction heat sources.
• ICRA blue-print-on-white film — containment zone instructions printed directly on the material for JCI and regulatory compliance documentation.
• 12 × 100 ft per roll — single roll covers a standard 10 × 10 ft room with full floor-to-ceiling overlap on four walls.

Environments That Require ICRA Containment Barriers

Healthcare facilities undergoing renovation during active operations — hospitals, surgery centers, long-term care facilities, and outpatient clinics — are required by The Joint Commission and CDC guidelines to establish ICRA-compliant barriers that reduce the risk of Aspergillus and other construction-dust pathogens reaching immunocompromised patients. The HCNC1001 satisfies these requirements while also protecting adjacent occupied spaces from noise and debris during mechanical, electrical, and structural work. Environmental abatement contractors also use the barrier during mold and lead remediation to comply with EPA and state containment protocols.

Installation Notes and Regulatory Approvals

The HCNC1001 ships as a roll only — framing poles and attachment hardware are not included. Install using any standard pole-and-clip containment system. Approved jurisdictions include City of Boston permit #33419 and State of California #F-50701. NFPA hazard rating: Health 1, Flammability 1, Reactivity 0.