Skip to content
Novatek HDSH1 - Long Sc. Hammer Shroud – PHS1VSEHDL

Novatek HDSH1 - Long Sc. Hammer Shroud – PHS1VSEHDL

Brand: NovatekSKU: PHS1VSEHDLIn Stock – Ready to Ship
$557.00

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Order before 5:00 PM EST for same-day dispatch. Estimated delivery:

Need help choosing? Talk to an expert

+1 (978) 295-7538

Novatek Shrouded HD Single Scaling Hammer VSE (Long Handle) for Dust-Controlled Coating Removal

The PHS1VSEHDL pairs the single-piston scaling hammer with a vacuum shroud that captures debris and dust at the impact point. It drives one tungsten carbide cruciform piston at 2,500 blows per minute, the same impact as the open HD-SH1, while a shroud and vacuum port route material to a connected dust collector. The 18-inch handle suits deck, slab, and floor-level work where the operator wants reach and dust containment together.

VSE Single Long Handle: Dust Capture at the Single-Piston Head

The shroud surrounds the cruciform head and connects through a port to a vacuum or dust collector, so coating debris and abrasive dust are pulled away as the piston works. This matters on lead paint, silica-bearing concrete, and enclosed marine or tank jobs where airborne material has to be controlled. Compared with the open HD-SH1, the VSE adds the shroud and port; compared with the 9-inch short version, the long handle adds reach and a more upright stance. The screw-top cap and nylon brush seal carry over for field service.

  • Vacuum shroud and port capture debris and dust at the head for connection to a dust collector
  • One tungsten carbide cruciform piston at 2,500 BPM, matching the open HD-SH1 impact
  • 18-inch handle adds reach for deck, slab, and floor-level surfaces with dust containment in place
  • Single-piston head stays narrow for edges, seams, and detail work
  • Runs on 6.5 CFM from one mid-size compressor
  • Screw-top cap allows field replacement of the head and piston
  • Nylon brush seal cleans the piston each stroke to reduce grit wear

VSE Single Long Handle Applications and Environments

Structural steel: dust-controlled removal of pack rust, laminar rust, and high-build coatings on beams and plate. Marine: strips deck coatings and non-skid in enclosed spaces where airborne debris must be captured. Concrete: take-down and texturing of slab surfaces with silica dust routed to a collector; aggregate exposure with the optional bush hammer head.

Specifications

Part No. PHS1VSEHDL
Configuration Shrouded single head (VSE), long handle
Dust Control Vacuum shroud with port for dust collector
Head Type Tungsten carbide cruciform, single-piece piston (bush hammer optional)
Blows Per Minute 2,500
Air Consumption 6.5 CFM (186 lpm)
Cylinder Bore 1.06 in (28 mm)
Piston Stroke 1.04 in (26 mm)
Handle Length 18 in (457 mm)
Tool Weight 10 lbs (4.6 kg)

Documents

Manual

Product Warranty Information

"180 Days"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships for a full 100% refund.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Novatek HDSH1 - Long Sc. Hammer Shroud – PHS1VSEHDLNovatek HDSH1 - Long Sc. Hammer Shroud – PHS1VSEHDL
View Cart
$557.00

Frequently Asked Questions

How does the shrouded VSE version differ from the standard HD-SH1?
The drive is the same: one tungsten carbide piston at 2,500 BPM on 6.5 CFM. The VSE adds a vacuum shroud around the head and a port that connects to a dust collector, so debris and dust are captured at the impact point instead of going airborne.
What does the shroud connect to?
The shroud has a vacuum port for connection to a dust collector or industrial vacuum. The connected collector pulls coating debris and dust away as the piston works, which supports work on lead paint and silica-bearing concrete.
Why choose the long handle over the short handle?
The long handle measures 18 inches versus 9 inches on the short VSE version. It adds reach for deck, slab, and floor-level surfaces and a more upright stance. The short handle is better for overhead and confined work.
What is the difference between the single VSE and triple VSE?
The single VSE (PHS1VSEHDL) drives one piston at 2,500 BPM on 6.5 CFM. The triple VSE drives three pistons at 3 x 2,500 BPM on 14 CFM, clears flat area faster, but needs more air and a larger dust collector.
How much air does it require?
6.5 CFM (186 lpm) at the tool, the same as the open HD-SH1. The dust collector is a separate utility and does not draw from the compressor.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare