Skip to content
Novatek 28PG Chisel Scaler – 28CS120

Novatek 28PG Chisel Scaler – 28CS120

Brand: NovatekSKU: 28CS120In Stock – Ready to Ship
$349.00

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – +1 (978) 295-7538
Order before 5:00 PM EST for same-day dispatch. Estimated delivery:

Need help choosing? Talk to an expert

+1 (978) 295-7538

28PG Chisel Scaler with Pistol-Grip Control

The 28CS120 is a pistol-grip chisel scaler that drives a 1/2-inch square-shank chisel at 2,200 blows per minute. At 5.8 pounds and 11.75 inches long, the angled grip steadies the heavier impact of the 28-class body for breaking out thick coatings and slag. All-steel construction handles sustained chipping.

28CS120 Grip and Chisel Setup

The pistol-grip body ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider passes or flush cutting.

  • Steadies heavy 2,200-BPM impact with an angled pistol grip
  • Breaks out thick coatings and slag from flat steel
  • Cuts flush against fittings with the optional bent chisel
  • Runs on a portable compressor at 7.5 cfm via a 1/4-inch NPT inlet
  • Converts to a needle scaler in seconds for irregular surfaces

28CS120 Applications and Environments

Shipyard and marine crews use the 28CS120 for heavy deck and bulkhead descaling where grip control matters. Bridge and structural-steel contractors strip thick coatings, while tank cleaners and restoration teams break out failed coatings and key concrete.

Specifications

Tool Type Pistol-grip chisel scaler
Blows Per Minute 2,200
Weight 5.8 lb (2.6 kg)
Length 11.75 in (300 mm)
Air Consumption 7.5 cfm (220 lpm)
Chisel Holder 1/2 in square shank, 3/4 in chisel
Air Inlet 1/4 in NPT

Documents

Manual

Product Warranty Information

"180 Days"

B2B & Tax-Exempt Purchases

We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.

How to place a tax-exempt order:

  1. Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
  2. We verify your certificate and mark your account tax-exempt — usually within one business day.
  3. Place your order and sales tax will not be charged.

For volume pricing or purchase orders, call +1 (978) 295-7538.

Shipping & Returns

Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.

Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.

Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.

Cancellations: cancel any time before your order ships for a full 100% refund.

30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.

Product Image
Added to cart
Novatek 28PG Chisel Scaler – 28CS120Novatek 28PG Chisel Scaler – 28CS120
View Cart
$349.00

Frequently Asked Questions

How does the 28CS120 differ from the 28CS100?
Both are 28-class chisel scalers at 2,200 BPM with the same chisel holder. The 28CS120 adds a pistol-grip body at 11.75 inches and 5.8 pounds for control on heavy chipping.
What chisel does it use?
A 1/2-inch square-shank holder with a 3/4-inch wide chisel, plus optional 2-inch, 3-inch, and 2 3/8-inch bent chisels.
How much air does it need?
The 28CS120 uses 7.5 cfm (220 lpm) through a 1/4-inch NPT inlet and runs on a portable compressor.
How does it compare to the 28CS130?
The 28CS120 uses a 1/2-inch square-shank holder with a 3/4-inch chisel. The 28CS130 uses a 5/8-inch hex holder with a 1-inch chisel and accepts 4-, 8-, and 12-inch super scrapers for wider work.
Can it convert to a needle scaler?
Yes. Swap the chisel holder for a needle holder and front tube in seconds for welds and curved surfaces.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare