Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Novatek 19 In-Line Chisel Scaler – 19CS100
$455.00
Ships from US manufacturer with factory warranty
Request a quote / purchase order
Tell us your quantity, delivery ZIP code and required date. For help choosing equipment, include your application.
Email a quote request Call (978) 295-7538Planning around a job date? Confirm current availability and delivery timing with us before ordering.
Authorized Novatek dealerGenuine Novatek equipment with full factory warranty support
Tax-exempt & PO acceptedSend your exemption certificate and we bill without sales tax
30-day returnsUnused equipment in original packaging, within 30 days
Need help choosing? Talk to an expert
+1 (978) 295-753819 InLine Chisel Scaler for Steel Coating Removal
The 19CS100 is a compact inline chisel scaler that drives a 1/2-inch square-shank chisel at 3,000 blows per minute. At 4.4 pounds and 13.5 inches long, it stays controllable for overhead and extended work while stripping coatings, slag, and corrosion from steel. All-steel construction carries the impact load through repeated production cycles.
19CS100 Chisel and Tube Setup
The tool ships with a 1/2-inch square-shank chisel holder and a 3/4-inch wide chisel, and accepts 2-inch, 3-inch, and 2 3/8-inch bent chisels for wider strokes or cutting against obstructions.
- Strips paint and mill scale from flat steel at 3,000 blows per minute
- Stays controllable overhead at 4.4 pounds and 13.5 inches
- Cuts flush against fittings with the optional bent chisel
- Runs on a portable compressor through a 1/4-inch NPT inlet
- Converts to needle scaling in seconds for curved surfaces
19CS100 Applications and Environments
Shipyard and marine crews use the 19CS100 for hull-plate descaling and weld prep. Bridge and structural-steel contractors strip connection points and gusset plates, while tank cleaners and restoration teams break out old coatings and key concrete before recoating.
Specifications
| Tool Type | Inline chisel scaler |
| Blows Per Minute | 3,000 |
| Weight | 4.4 lb (2.0 kg) |
| Length | 13.5 in (337 mm) |
| Air Consumption | 6 cfm (170 lpm) |
| Chisel Holder | 1/2 in square shank, 3/4 in chisel |
| Air Inlet | 1/4 in NPT |
Documents
Product Warranty Information
B2B & Tax-Exempt Purchases
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
- Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
- We verify your certificate and mark your account tax-exempt — usually within one business day.
- Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships. Refunds are issued for the order total minus a non-refundable payment processing fee, which may apply, so a cancellation is not always a 100% refund. No fee is deducted if we cancel the order or the item arrives damaged or defective.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
$455.00
Complete your setup
Commonly paired with the Novatek 19 In-Line Chisel Scaler – 19CS100