NIKRO PDC2400 Upright Single Motor Duct Vacuum – 2500 CFM, HEPA

NIKRO PDC2400 Single-Motor Upright Duct Vacuum for Smaller Runs

The PDC2400 pulls 2500 CFM through a single motor and an upright cabinet, sized for residential and light commercial duct work where a dual-motor system is more than the job needs. Its three-stage filtration ends in a 99.97% HEPA filter at 0.3 micron, so recovered dust stays inside the machine. At 159 lbs it is the lightest upright in the NIKRO poly duct-vacuum line.

PDC2400 Single-Motor Pull and HEPA Capture

One backward-incline blower gives the machine enough airflow to clear typical supply and return runs, and the sealed HEPA filter train holds the fine particulate the job is meant to remove. The single-motor draw keeps the power requirement to one standard circuit, which suits smaller sites and lighter service calls.

• 2500 CFM free-air pull clears residential and light commercial duct runs
• Single backward-incline blower keeps airflow steady on standard hose lengths
• 3-stage filtration ending in a 99.97% HEPA filter at 0.3 micron
• 5" static pressure carries debris through the duct path
• 115V/10 draw runs off a single standard outlet
• Upright cabinet, 31" L x 21" W x 47" H fits tight utility closets
• 159 lb assembled weight is the lightest in the upright line

PDC2400 Applications and Environments

Duct-cleaning contractors use the PDC2400 for single-family homes, townhouses, and small offices where duct runs are shorter and a single motor covers the load. Restoration crews take it into apartment units and small commercial spaces after water and fire losses to pull soot and debris from the ductwork. Facility managers keep one for routine cleaning in clinics, daycare centers, and small retail units where a full dual-motor system would not fit through the space. Because it draws from one 115V circuit and weighs 159 lbs, a single technician can load it, move it up stairs, and set it up on a light service call without a second person.

Specifications