Skip to content
Namco 1014 Air Mover – 3/4 HP, 3-Speed, Polyethylene, Carpet Drying

Namco 1014 Air Mover – 3/4 HP, 3-Speed, Polyethylene, Carpet Drying

Brand: Namco ManufacturingSKU: 1014In Stock – Ready to Ship
$285.00

Ships from US manufacturer with factory warranty

Ach Direct DebitAmazon American Express Apple Pay Diners ClubDiscoverGoogle Pay MastercardPayPalShop Pay USDC Visa
Authorized RetailerFactory-authorized dealer with genuine products
Manufacturer's WarrantyFull manufacturer warranty included
30-Day ReturnsHassle-free returns within 30 days
Lowest Price GuaranteedWe match any competitor's price
Ordering 3+ units? Call for volume pricing – (978) 295-7538
Order before 5:00 PM EST for same-day dispatch. Estimated delivery:

Need help choosing? Talk to an expert

(978) 295-7538

Namco 1014 Air Mover – 3/4 HP, 3-Speed Carpet Blower

The Namco 1014 is a 3/4 HP, three-speed air mover in a durable polyethylene housing designed for carpet drying, floor drying, and water damage response. The flat-outlet design directs high-volume airflow under carpet and along floor surfaces to accelerate evaporation. Three speed settings let operators match airflow to the drying conditions — lower speeds for delicate surfaces, maximum speed for rapid moisture extraction after flooding or carpet extraction cleaning.

Motor, Speed, and Airflow

  • Motor: 3/4 HP (0.75 HP)
  • Speed settings: 3-speed control
  • Power supply: 120V, standard household current
  • Housing material: Polyethylene — impact-resistant and lightweight
  • Outlet design: Flat outlet angles airflow under carpet and along floor surfaces
  • Stackable design: Efficient storage and transport for crews working multiple units

Carpet Cleaning and Water Damage Response

Carpet cleaning contractors use the 1014 immediately after extraction — positioning the flat outlet under the carpet edge directs airflow between the backing and the pad to dry both layers simultaneously. Water damage restoration teams place multiple units around the perimeter of a wet area to create a cross-flow drying pattern that reduces dry times compared to single-unit axial fans. The polyethylene housing is unaffected by incidental water contact during restoration work. At 3/4 HP on 120V, the 1014 runs from any standard 15A residential or commercial outlet without tripping breakers when multiple units share a circuit — confirm amperage draw per unit with Namco for multi-unit circuit planning.

Storage, Transport, and Multi-Unit Deployment

The flat-profile polyethylene body stacks cleanly for transport in service vehicles — important for restoration crews who deploy six to twelve units per job. The compact footprint keeps the unit out of foot traffic paths during occupied-space drying operations. Three speed settings allow the same unit to serve both high-volume carpet drying (high speed) and gentle air circulation in occupied offices after light water events (low speed). Unlike centrifugal blowers designed for air scrubbing or negative pressure, the 1014 is purpose-built for surface and under-carpet drying.

Specification Value
Model 1014
Motor 3/4 HP (0.75 HP)
Speed Settings 3-speed
Power Supply 120V, standard outlet
Housing Material Polyethylene
Outlet Design Flat outlet for under-carpet and floor drying
Applications Carpet drying, floor drying, water damage restoration
Brand Namco Manufacturing

Manufacturer's Warranty

This product comes with a full manufacturer's warranty. All warranty claims are handled directly by the manufacturer.

For specific warranty details, please contact us at (978) 295-7538 or email info@uscleaningtools.com

Product Image
Added to cart
Namco 1014 Air Mover – 3/4 HP, 3-Speed, Polyethylene, Carpet DryingNamco 1014 Air Mover – 3/4 HP, 3-Speed, Polyethylene, Car...
View Cart

Frequently Asked Questions

How should the Namco 1014 be positioned for carpet drying?
Place the flat outlet under the carpet edge so airflow runs between the carpet backing and the pad. This dries both the carpet and the pad layer simultaneously. For large areas, position multiple units around the perimeter to create a cross-flow pattern that moves moisture toward the edges.
What speed setting should be used for water damage restoration?
Use the highest speed setting for maximum airflow during water damage response — this produces the most evaporation per hour. Lower speeds are appropriate for occupied spaces where high airflow would be disruptive, or when drying delicate carpet fibers that could be displaced by maximum airflow.
Can the Namco 1014 run on a standard 15A household circuit?
The 1014 operates on 120V at 3/4 HP. Confirm the specific amperage draw with Namco before running multiple units on the same circuit — at full speed, each unit draws a portion of the 15A available. Most restoration crews run two to three units per 20A circuit.
How does the flat outlet differ from a round outlet air mover?
A flat outlet directs a low-profile sheet of air that slides under carpet edges and along floor surfaces. Round or cylindrical outlets concentrate airflow in a jet — better for drying walls and ceilings. The 1014's flat outlet is specifically designed for floor and under-carpet drying applications.
Is the Namco 1014 stackable for storage in a service vehicle?
Yes. The flat polyethylene profile is designed to stack, which is important for restoration crews who carry multiple units. The lightweight housing makes loading and positioning easy for a single technician.
How does the 1014 compare to a centrifugal air scrubber for drying?
The 1014 is a surface drying blower — it moves air along floors and under carpet. An air scrubber or negative air machine filters airborne particles and controls air pressure in a space. They serve different purposes: use the 1014 for drying surfaces, and an air scrubber (such as Aerospace America models) for airborne contamination control.

Why Choose US Cleaning Tools?

See the price, buy now, get it fast. No quotes, no callbacks, no sales rep required.

  • No Quote Needed — All prices shown. Click buy, checkout, done.
  • Authorized Dealer — Brand-new units with full manufacturer warranty.
  • Trusted by 10,000+ Facilities — Schools, warehouses, contractors nationwide.
  • Expert Support — Real specialists at (978) 295-7538.
  • Fast Shipping — Trackable delivery in 2–8 business days.

Frequently Asked Questions

1. What payment methods can I use?

We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.

2. When will my payment be processed?

Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.

3. Will I receive an order confirmation?

Yes, a confirmation email will be sent to the provided email address once the order is placed.

4. How long does it take to process an order?

Orders are processed within 1-2 business days and then prepared for shipment.

5. How long does it take for my order to arrive?

Estimated arrival time (ETA) is 5-7 business days for all orders.

6. Do you offer warranty?

All our products come with a manufacturer warranty of at least 1 year, depending on the brand.

― Easy and convenient payment ―
Ach Direct Debit Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay USDC Visa
― Verified security ―
✔ Secure payment    ✔ 30-day return policy    ✔ Data protection

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare