CD-2003-3MHH Gas Pressure Washer — Hand-Carry CD Series with Honda GX200
The Mi-T-M CD Series CD-2003-3MHH is a compact, hand-carry pressure washer producing 2,000 PSI at 2.7 GPM — 5,400 cleaning units — powered by a 196cc Honda GX200 OHV engine. At 56 lbs, it loads into a truck cab without assistance and stores in a maintenance closet or under a service vehicle bench. Designed for small contractors, maintenance crews, and property managers who need portable cleaning power without a dedicated equipment trailer. ETL certified.
CD-2003-3MHH Portability, Engine, and Pump Configuration
The hand-carry steel mounting plate with four rubber vibration isolators keeps the unit stable on uneven surfaces and reduces operator fatigue during transport — the balanced design prevents tip-over when carried by the integrated handle.
2,000 PSI at 2.7 GPM (5,400 CU) — appropriate for concrete cleaning, vehicle washing, equipment rinse-down, and facility exterior maintenance at light-to-medium output
196cc Honda GX200 OHV engine — commercial-grade engine with cast-iron sleeve; serviceable at virtually any small engine shop without factory parts ordering
AR axial pump with forged brass manifold — thermal relief valve and in-line water strainer standard; brass manifold resists corrosion in outdoor storage
56-lb net weight, hand-carry frame — loads into a pickup cab, van floor, or ATV cargo rack; no trailer required for single-unit deployment
50-foot non-marking hose included — covers a full parking space row or equipment bay without repositioning the unit
ETL certified — meets US electrical safety standards; required for some commercial facility procurement
CD-2003-3MHH Applications and Environments
Property management companies maintaining apartment complexes, office parks, and retail centers keep the CD-2003-3MHH for on-call cleaning tasks — sidewalk maintenance, dumpster pad washing, and seasonal building exterior rinse — where the compact size fits in a standard maintenance vehicle. Small landscaping and groundskeeping operations use it for equipment rinse-down at the end of each work day. Service contractors who clean HVAC equipment, condensers, and rooftop units carry it up access ladders or on service lifts where a cart-mounted unit would be impractical. The 56 lb weight allows a single operator to deploy without assistance.
CD-2003-3MHH GPM, PSI, and Nozzle Configuration
Rated at 2.7 GPM at 2,000 PSI (5,400 cleaning units) at rated flow. Includes four quick-connect nozzles (0°, 15°, 25°, detergent); 50-foot non-marking hose; 36-inch lance with trigger gun. ETL certified. Cold water only. 49-state Honda GX200 — not for sale in California.
We supply contractors, restoration companies, property managers, schools, government agencies, and other tax-exempt organizations.
How to place a tax-exempt order:
Write to us through our Contact Us page or email info@uscleaningtools.com and attach your valid tax exemption certificate (state resale or exemption certificate).
We verify your certificate and mark your account tax-exempt — usually within one business day.
Place your order and sales tax will not be charged.
For volume pricing or purchase orders, call +1 (978) 295-7538.
Shipping & Returns
Free shipping on most brands for orders over $300, delivered to the lower 48 states. Any brand-specific freight rate is shown at checkout before you pay.
Processing & delivery: in-stock orders are processed within 1–2 business days and typically deliver in 5–7 business days. Tracking is emailed within 24 hours of shipment. Built-to-order and backordered equipment shows its lead time on this page.
Freight deliveries: inspect your equipment on arrival and note any damage on the delivery receipt. Items damaged in transit or defective on arrival are fully covered at no cost to you.
Cancellations: cancel any time before your order ships for a full 100% refund.
30-day returns: return unused equipment in its original packaging within 30 days of delivery. Change-of-mind returns are subject to a restocking fee. To start a return, email info@uscleaningtools.com or call +1 (978) 295-7538.
What makes the CD-2003-3MHH a "hand-carry" unit versus a wheeled pressure washer?
The CD-2003-3MHH is built on a steel mounting plate with rubber vibration isolators instead of a wheeled cart frame. At 56 lbs and 18 × 14.5 × 18 inches, one person can carry it by the integrated handle or load it into a truck cab without lifting over a tailgate. Wheeled units in this series start at 75 lbs and require a truck bed or trailer.
Why does the CD-2003-3MHH include a 0° nozzle when other Work Pro models don't?
The CD Series includes a 0° nozzle for concentrated cleaning on small areas — weld seams, concrete cracks, and tight equipment joints where the 15° or 25° fan pattern is too wide. At 2,000 PSI, the 0° tip is less likely to cause surface damage than on higher-pressure models. Still use caution on soft concrete and painted surfaces.
Is the CD-2003-3MHH ETL certified and what does that mean?
Yes — ETL certification means the unit has been tested and listed by Intertek to US safety standards, equivalent to UL listing for commercial procurement. Some facility managers and government purchasers require ETL or UL listing for equipment operating on-site.
How does the CD-2003-3MHH compare to the WP-3200-0MHB?
The WP-3200-0MHB produces 3,200 PSI vs 2,000 PSI and uses a crankshaft pump vs the CD Series axial pump — significantly more cleaning output and duty cycle. Choose the CD-2003-3MHH for portability and single-person deployability; choose the WP-3200 when you need higher throughput and longer daily run times.
What is the difference between the CD-2003-3MHH and CD-2003-3MMH?
Engine only: the 3MHH uses a 196cc Honda GX200; the 3MMH uses a 212cc Mi-T-M OHV. Both deliver 2,000 PSI at 2.7 GPM through the same AR axial pump and frame. Choose based on engine service preference.
Is the CD-2003-3MHH available in California?
No — the Honda GX200 on this unit is a 49-state non-CARB engine. Contact Mi-T-M for California-compliant configurations before ordering for California delivery.
Frequently Asked Questions
1. What payment methods can I use?
We accept Visa, MasterCard, American Express, Diners Club, Discover, major debit cards, and digital wallets like PayPal, Google Pay, Meta Pay, and Apple Pay.
2. When will my payment be processed?
Your credit/debit card or PayPal account will be charged when you place your order. Secure payment processing protects your information.
3. Will I receive an order confirmation?
Yes, a confirmation email will be sent to the provided email address once the order is placed.
4. How long does it take to process an order?
Orders are processed within 1-2 business days and then prepared for shipment.
5. How long does it take for my order to arrive?
Estimated arrival time (ETA) is 5-7 business days for all orders.
6. Do you offer warranty?
All our products come with a manufacturer warranty of at least 1 year, depending on the brand.
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
