Dapper Supply DP-WBFS1236 25-Inch Sweep & Scrub Machine – Self-Propelled

DP-WBFS1236 Sweep and Scrub in a Single Pass

Running a sweeper and then a scrubber over the same floor is two passes and two machines. The DP-WBFS1236 collects debris into a 1.6-gallon hopper and scrubs behind it in one 25.5-inch pass, at 26,900 square feet an hour. On a floor that currently needs pre-sweeping, that halves the labour rather than shaving it.

DP-WBFS1236 One-Pass Cleaning and Recovery

The 35.4-inch squeegee is nearly ten inches wider than the scrub path, backed by 55 CFM at 35 inches of lift.

• Sweeps and scrubs together — removes the pre-sweep step entirely on floors with light debris
• Up to 95% water recovery — floors are walkable immediately, which is what allows cleaning in occupied hours
• 14.5-gal solution and 17-gal recovery tanks — long runs between fills on open floor
• Self-propelled at 610 lbs — the operator steers rather than pushes, so output holds up over a full shift
• 3 to 4 hours on the 24V system — matched to the tank capacity, so battery and water run down together
• 65 dB — quiet enough for retail and school corridors during occupied hours

DP-WBFS1236 Applications and Environments

Warehouses, retail floors, schools and larger commercial buildings are the target. It suits a facility that has outgrown a 20-inch walk-behind but cannot justify a ride-on, either on budget or because doorways and aisles will not take one. The debris hopper is the deciding feature: sites with cardboard dust, packaging fragments or grit tracked in from a dock get a genuine second machine's worth of work out of it. Adjustable brush pressure lets the same unit run light on finished floors and heavy on sealed concrete without changing brushes. Schools use machines in this class for gymnasium and cafeteria floors, where debris and spills arrive together and a scrubber alone smears rather than lifts. Retail sites value the immediate dry-behind performance, since a floor that stays wet for ten minutes is a liability during trading hours. Before ordering, check the narrowest doorway on the cleaning route: at 25.5 inches of cleaning path the machine body needs meaningful clearance, and a unit that cannot pass into a stockroom leaves part of the building on the old cleaning method.

Specifications