Dapper Supply DP-FM1307 17" Floor Buffer Polisher – Weighted, 3 Scouring Pads

DP-FM1307 Weighted 17-Inch Buffer for Strip, Scrub, and Polish Work

The DP-FM1307 is a 17-inch weighted floor buffer built around a 1500W copper motor turning at 154 RPM. Up to 150 lbs of downforce presses the pad into the floor for stripping and scrubbing, and the weights come off when a lighter touch is needed for buffing and polishing. One machine covers the full strip-scrub-buff-polish cycle on hard floors.

1500W Motor, 154 RPM, and Removable 150 lb Weight System

• 1500W copper motor — holds steady torque through wax, finish, and ground-in soil during daily commercial use
• 150 lb weighted design — presses the pad down for stripping and scrubbing with less operator effort against the machine
• Removable weights — lift off to drop the downforce for polishing and light maintenance, then reload for aggressive stripping
• 154 RPM speed — low-speed rotation matched to scrubbing, stripping, buffing, and polishing without burning finishes
• 3.5-gallon solution tank — feeds cleaning solution or polish onto the floor so the operator is not stopping to re-wet pads
• Three included pads — black stripping, red scrubbing, and white polishing pads cover the common jobs out of the box
• 39 ft power cord — reaches across large open floors between outlet changes
• Aluminum frame and bumper ring — protects the housing and surrounding fixtures through repeated daily service

DP-FM1307 Applications and Environments

Janitorial crews and floor-care contractors use the DP-FM1307 to strip old finish, scrub daily soil, and restore shine on VCT, terrazzo, marble, vinyl, tile, concrete, and hardwood. It fits lobby and corridor maintenance in schools, hospitals, retail spaces, and warehouses where the same machine has to move between heavy stripping and finish polishing across a shift. The removable-weight system lets a single operator run stripping passes in a back-of-house area, then pull weights for a controlled polish on a lobby floor without switching equipment. The 154 RPM speed is what keeps it safe across that surface range, since a low-speed rotation strips and buffs without the heat and abrasion a high-speed burnisher would put into a marble or hardwood finish. The 3.5-gallon tank feeds solution directly to the pad, so a crew running long corridors is not stopping every few minutes to re-wet, and the 39 ft cord holds down the number of outlet changes across a large open floor. The machine arrives with all three pads, the black stripping, red scrubbing, and white polishing pads, so it is ready for the common jobs on delivery. The 2-year manufacturer warranty covers sustained commercial-schedule use.

Specifications