Dapper Supply DP-FM1301 17" Heavy-Duty Floor Buffer Polisher – Electric, Scouring Pads

DP-FM1301 Buffer for Multi-Surface Scrubbing and Restoration on One Head

The DP-FM1301 pairs a 17-inch cleaning path with 175 RPM random-orbit action, so it scrubs and polishes tile, grout, hardwood, vinyl, concrete, marble, and terrazzo while holding down swirl marks that a fixed-rotation buffer leaves behind. A 1100W pure copper motor and a counterweighted frame supply the pressure for daily commercial cleaning and periodic floor restoration.

DP-FM1301 Scrubbing and Motor Detail

• 17-inch cleaning path — covers more floor per pass in offices, entries, and back-of-house areas.
• 175 RPM random-orbit action — cleans hard floors while reducing swirl marks and surface damage.
• 1100W pure copper motor — carries scrubbing and polishing loads across long shifts.
• 3.5 gallon solution tank — feeds cleaning solution through the head so operators refill less often.
• 39 ft power cord — reaches across wide rooms with fewer outlet changes.
• Counterweighted design — adds downward pressure for scrubbing, polishing, and restoration work.
• Aluminum frame — keeps the machine lighter to steer and reduce operator fatigue.
• Protective rubber bumper — shields walls, baseboards, and fixtures during close work.
• 2-year manufacturer warranty — covers the motor and frame under commercial use.

DP-FM1301 Applications and Environments

Facility crews use the DP-FM1301 where one machine has to move between surface types in a single building: tile and grout in restrooms, vinyl in corridors, hardwood or terrazzo in lobbies, and sealed concrete in service areas. The random-orbit motion is the reason it crosses those materials without cutting swirl patterns into softer finishes, which matters on wood and marble where a high-speed rotary would mark the surface. The 3.5-gallon onboard tank meters solution through the head so an operator can scrub a soiled entry, then swap pads and polish a stone lobby without stopping to mop solution down first. Restoration contractors reach for the counterweight when a floor needs aggressive scrubbing before refinishing, since the added pressure works detergent into ground-in soil. The 39-foot cord and lighter aluminum frame keep a single tech productive across a large site, and the rubber bumper lets the 17-inch head pass close to walls and fixtures without scuffing them. Because the 175 RPM orbit runs slower than a rotary buffer, crews can hand the machine to newer staff for routine maintenance without the swirl risk that comes with high-speed pads.

Specifications