Bissell BGDC-21 Floor Burnisher 21" – 1.5 HP DC, 1500 RPM, 50 ft Cord

Bissell BGDC-21 21" Commercial Floor Burnisher – 1500 RPM DC Motor

The BGDC-21 uses the same 1.5 HP DC rectified motor as the 19-inch BGDC-19 in a 21-inch pad configuration — covering 11% more floor per pass for facilities where burnishing time is a scheduling constraint. The DC motor maintains consistent 1,500 RPM under load regardless of voltage fluctuations, and the non-conductive dual triggers with interlock switch keep both operator hands engaged for safety. Polished aluminum chassis, adjustable handle, and non-marring bumpers complete the commercial build. Pad driver sold separately.

BGDC-21 21" Burnisher Specs and Pad Coverage

• Motor: 1.5 HP DC rectified — consistent RPM under load, no startup torque, no voltage sensitivity
• Pad speed: 1,500 RPM — standard maintenance burnishing for VCT, vinyl, terrazzo, sealed concrete
• Pad size: 21 inches — 11% wider than 19-inch models, fewer passes on wide corridors
• Chassis: polished aluminum — lightweight and rigid for extended burnishing sessions
• Safety: non-conductive dual triggers with interlock switch — both hands required for operation
• Bumpers: non-marring full-wrap — wall and baseboard protection during passes
• Low-profile drive apron: accesses under counters and cove areas
• Handle: adjustable height — operator comfort across full shifts
• Power cord: 50 ft, 14/3-gauge, 13–15 amp draw
• Weight: 86 lbs
• Wheels: 6-inch non-marking operating, 4-inch transport
• Warranty: 5-year limited motor
• Pad driver: sold separately

19" vs 21" Burnisher: Coverage and Maneuverability Tradeoffs

A 21-inch burnishing pad covers the same 10,000 square foot floor in approximately 11% fewer passes than a 19-inch pad. For hospitals with long wide corridors, convention centers, and airport terminals where burnishing schedules run during tight overnight or early-morning windows, the additional 2 inches of pad width meaningfully reduces the time required to complete the floor. The BGDC-21 at 86 lbs weighs 2 lbs more than the 84-lb BGDC-19, a negligible operational difference. For tight spaces — narrow aisles, areas with frequent turns — the 19-inch BGDC-19 maneuvers more easily. For wide-open institutional corridors and large floor areas, the 21-inch BGDC-21 is the more productive specification.

1,500 RPM Burnishing Pad Specification and What Ships in the Box

The BGDC-21 ships with the machine, 50-foot power cord, and documentation. The 21-inch pad driver is sold separately and required before first use. Standard pad specification for 1,500 RPM maintenance burnishing: tan or white burnishing pads for VCT and vinyl, natural hair pads for terrazzo and sealed marble. Red buffing pads suit spray buff applications where solution is applied before the pass. At 1,500 RPM, the BGDC-21 is a daily-cycle maintenance machine — appropriate for facilities on daily or every-other-day burnishing programs. Facilities burnishing less than twice weekly typically benefit from the higher gloss-per-pass output of the 2,000 RPM BGDC-21-2000.

Documents

BGDC-21 Specification Sheet (PDF)

BGDC-21 Brochure (PDF)