Bissell BGDC-19 Floor Burnisher 19" – 1.5 HP DC, 1500 RPM, 50 ft Cord

Bissell BGDC-19 19" Commercial Floor Burnisher – 1500 RPM DC Motor

The BGDC-19 runs a 1.5 HP DC rectified motor at 1,500 RPM on a 19-inch pad — the standard entry into high-speed floor burnishing for VCT, vinyl, tile, terrazzo, and sealed concrete. The DC rectified motor design eliminates startup torque issues, low-voltage drops, and brown-out conditions that affect universal motors. A polished aluminum chassis, non-conductive dual triggers, and non-marring full-wrap bumpers complete the commercial-grade specification. Pad driver sold separately.

BGDC-19 Burnisher Specs and DC Motor Advantages

• Motor: 1.5 HP DC rectified — no startup torque, no brown-out sensitivity, consistent RPM under load
• Pad speed: 1,500 RPM — entry-level high-speed burnishing for most commercial floor care schedules
• Pad size: 19 inches — covers standard commercial corridor widths efficiently
• Chassis: polished aluminum — lightweight and rigid for extended burnishing runs
• Safety: non-conductive dual triggers — eliminates electrical shock risk during operation
• Bumpers: non-marring full-wrap — protects baseboards and furniture from contact damage
• Low-profile drive apron: cleans under counters, coves, and toe-kick areas
• Handle: adjustable height — accommodates operators of different heights
• Power cord: 50 ft, 14/3-gauge safety — rated for 13–15 amp draw
• Wheels: 6-inch non-marking operating, 4-inch transport
• Warranty: 5-year limited motor
• Pad driver: sold separately

When 1,500 RPM Burnishing Is Appropriate

Floor burnishing generates heat and friction between the pad and floor finish, which momentarily melts and redistributes the finish to create a high-gloss surface. At 1,500 RPM, the BGDC-19 produces a professional gloss level on VCT, vinyl composition tile, terrazzo, and sealed concrete without the risk of finish removal that higher RPM machines pose on softer finishes. Facilities running daily or every-other-day burnishing cycles — hospitals, schools, and retail stores on high-frequency maintenance programs — often specify 1,500 RPM machines as the sustainable maintenance standard. The 2,000 RPM BGDC-19-2000 is appropriate where the maintenance schedule is less frequent and higher luster is required per session.

Floor Burnisher Pad Selection and What Ships in the Box

The BGDC-19 ships with the machine, 50-foot power cord, and operator documentation. The pad driver is sold separately — required for operation. Tan or white burnishing pads (3M Scotch-Brite 3100 or equivalent) are the standard specification for 1,500 RPM maintenance burnishing on VCT and vinyl. Red buffing pads suit spray buffing applications. Natural hair pads work on sealed terrazzo and marble. Pad hardness must match floor finish hardness — too aggressive a pad at high RPM removes finish rather than redistributing it. The Xactimate code for burnishing labor in commercial restoration contexts is CLNCMP for commercial cleaning maintenance.

Documents

BGDC-19 Specification Sheet (PDF)

BGDC-19 Brochure (PDF)