Abatement Technologies V930D HEPA Vacuum for Asbestos & Mold Remediation – 74 CFM, OSHA-Compliant

The Abatement Technologies V930D HEPA Vacuum is the OSHA-compliant industry standard for asbestos abatement, mold remediation, and lead dust removal — 74 CFM with 92 inches of water lift, sealed-housing 99.97% HEPA filtration at 0.3 microns, and ultra-quiet 53 dB operation. At 16.5 lbs, it carries single-handed up stairs and fits inside containment cells.

V930D HEPA Vacuum for Asbestos Abatement and Mold Remediation — 99.97% HEPA at 53 dB

The Abatement Technologies V930D is a HEPA vacuum for asbestos abatement, mold remediation, and lead dust removal. It pulls 74 CFM with 92 inches of water lift through a 32mm hose — enough suction to capture asbestos fibers, fine silica, mold spores, and construction dust without particle bypass. At 53 dB measured at 6.5 feet, this asbestos HEPA vacuum runs quietly enough to operate in occupied commercial spaces during business hours, which sets it apart from louder shop-vac alternatives that require after-hours scheduling. The stainless steel canister and multi-stage filtration stack — paper bag, foam pre-filter, and upstream HEPA — mean exhaust air is clean enough to discharge inside the building rather than requiring ducted exterior ventilation.

V930D Suction Performance and Multi-Stage Filtration

The filtration sequence matters for hazardous material work: coarse debris hits the paper bag first, the foam pre-filter catches mid-range particles, and the upstream HEPA handles sub-micron particulates — extending filter life and maintaining suction over long use cycles.

• 74 CFM max airflow — moves enough air volume through a 32mm hose to pick up fine dust from rough concrete, drywall sanding residue, and mold-contaminated debris
• 92" water lift (2,345 mm H2O) — high static pressure for pulling material through longer hose runs or from hard-to-reach surfaces like ceiling joints and wall cavities
• 99.97% HEPA filtration at 0.3 microns — upstream filter with 13.13 sq ft of filter area; particle capture at the level required for asbestos and lead dust work
• 4-gallon paper bag capacity — bag collects bulk debris before it reaches the HEPA, extending the replacement interval on primary filter
• 53 dB at 6.5 ft — comparable to a normal conversation; usable in occupied offices, schools, and healthcare facilities without noise complaints
• 32 ft power cord — covers most room configurations without repositioning or adding an extension cord

V930D Applications: Asbestos, Mold, and Lead Dust Containment

Asbestos abatement crews working in pre-1980 commercial buildings rely on the V930D's upstream HEPA configuration for compliance with OSHA 29 CFR 1926.1101 requirements for asbestos fiber containment. Mold remediation contractors use the V930D as their primary containment vacuum during Category 1 and 2 remediation projects, where spore capture and quiet operation in occupied structures both matter. Lead-paint renovation contractors use the V930D for EPA RRP-compliant dust collection in pre-1978 housing renovations. Construction cleanup teams use it for post-demo drywall dust and silica removal in schools, hospitals, and occupied office renovations where after-hours scheduling is not possible. Property management companies and janitorial firms keep one on-site for periodic air quality maintenance in facilities with known moisture intrusion history.

V930D Filtration Rating and What Ships in the Box

True HEPA filtration at 99.97% efficiency at 0.3 microns meets OSHA 29 CFR 1926.1101 requirements for asbestos fiber containment and is appropriate for lead dust collection in pre-1978 renovation work. The V930D ships with a complete accessory kit: 6 ft hose with bent-end wand, telescopic aluminum wand, combination floor nozzle, crevice nozzle, combination round dust brush/upholstery nozzle, and one paper dust bag. IP20 protection class. 8.7-amp draw at 120V.

Specifications

Documents

V930D HEPA Vacuum Data Sheet