Questions? Call us!
+1 (978) 295-7538
Mon-Fri: 9AM - 5PM EST
Pressure Washer Parts & Accessories
Pressure washer parts and accessories keep a commercial machine earning instead of waiting on a twelve dollar o-ring. Pumps and repair kits, valves, hoses, guns and wands, nozzles and fittings for Mi-T-M machines.
Filters
Mi-T-M AW-7200-0004 Pressure Washer Nozzle – 6 Position Multi-#4.0
Mi-T-MA multi-function nozzle that puts six stainless steel nozzles in one compact head: 0°, 15°, 25° and 40°, plus soap and rinse. This version has a 4....
View full detailsMi-T-M AW-7200-0035 Pressure Washer Nozzle – 6 Position Multi-#3.5
Mi-T-MSix stainless steel nozzles in one multi-function head give you 0°, 15°, 25° and 40° patterns plus soap and rinse without swapping tips. This model...
View full detailsMi-T-M AW-7510-0004 Pressure Washer Nozzle – Acc-Rotate 5100psi #4.0
Mi-T-MA 4.0 orifice rotating nozzle, 5100 PSI rated, with a 212°F maximum temperature. It delivers 0° impact with 25° coverage and includes a filter with...
View full detailsMi-T-M AW-7500-SERIES Pressure Washer Nozzle – Acc-Rotate 6000psi
Mi-T-MA 6000 PSI rotating nozzle accessory from the Mi-T-M AW-7500 series.
Mi-T-M AW-7004-SERIES Pressure Washer Nozzle – Acc-Rotating Nozzle-Laser
Mi-T-MRotating nozzle accessory from Mi-T-M, listed under the name Rotating Nozzle-Laser.
Mi-T-M 850-0324 Pump Repair Part – Insulation Gasket
Mi-T-MAn insulation gasket that seals between the 50-0177 stack adapter and the boiler housing.
Mi-T-M 18-0371 Pressure Washer Nozzle – Rotating W/Lance 1.4mm
Mi-T-MThis rotating nozzle comes on a lance with a 1.4mm orifice and is rated for 3500 PSI at a 105° maximum temperature. Its spinning 0° stream covers a...
View full detailsMi-T-M 18-0370 Pressure Washer Nozzle – Rotating W/Lance 1.25mm
Mi-T-MA rotating nozzle with lance and a 1.25mm orifice, rated 2400 PSI and 105° maximum temperature. It gives 0° spray impact spread over 25° of coverag...
View full detailsMi-T-M AW-3100-0003 Pressure Washer Nozzle – Assy - Qc Misting Nozzle
Mi-T-MA quick connect misting nozzle that attaches to a 36-inch lance for misting hard to reach areas.
Mi-T-M AW-3100-0001 Spray Gun and Wand – Kit - Dual Gun Mister
Mi-T-MA dual gun accessory kit for Mister pressure washers. It includes a dual gun adapter, a trigger gun with misting nozzle and a 75-foot non-marking h...
View full detailsMi-T-M 851-0432 Spray Gun and Wand – Gun Assembly - Mister
Mi-T-MA trigger gun with a misting nozzle, made for Mister Combination Pressure Washers.
Mi-T-M 851-0431 Spray Gun and Wand – Adapter Assy-Mister Dual Gun
Mi-T-MThis dual gun adapter is made for Mi-T-M Mister Combination Pressure Washers.
Mi-T-M AW-7510-0045 Pressure Washer Nozzle – Acc-Rotate 5100psi #4.5
Mi-T-MA 5100 PSI rotating nozzle accessory with a #4.5 orifice.
Mi-T-M AW-0018-0374 Pressure Washer Nozzle – Rotating 8700 Psi #3.0
Mi-T-MA rotating nozzle with a 3.0 orifice rated for 8700 PSI and a 190°F maximum temperature. It combines 0° impact with 25° coverage for concrete surfa...
View full detailsMi-T-M AW-7500-0045 Pressure Washer Nozzle – Acc-Rotate 6000psi #4.5
Mi-T-MRotating nozzle for pressure washers, rated for 6000 PSI and fitted with a #4.5 orifice.
Mi-T-M AW-7500-0035 Pressure Washer Nozzle – Acc-Rotate 6000psi #3.5
Mi-T-MA Mi-T-M rotating nozzle accessory rated 6000 PSI with a #3.5 orifice.
Mi-T-M AW-7510-0055 Pressure Washer Nozzle – Acc-Rotate 5100psi #5.5
Mi-T-MMi-T-M rotating nozzle with a #5.5 orifice, rated for 5100 PSI.
Mi-T-M 851-0371 Spray Gun and Wand – Gun/Black Wand Grip W/Qc
Mi-T-MA replacement gun and wand set with a 48-inch plated steel wand rated 5000 PSI. The trigger gun is insulated and has a safety lock-off; the wand ha...
View full detailsMi-T-M AW-7510-SERIES Pressure Washer Nozzle – Acc-Rotate 5100psi
Mi-T-MRotating nozzle accessory from Mi-T-M, rated for 5100 PSI.
Mi-T-M AW-7510-0003 Pressure Washer Nozzle – Acc-Rotate 5100psi #3.0
Mi-T-MThis rotating nozzle has a 3.0 orifice and is rated 5100 PSI with a 212°F maximum temperature. The rotating 0° jet sweeps a 25° area, and a filter ...
View full detailsMi-T-M AW-7310-0003 Pressure Washer Nozzle – Acc-Rot 3000psi #3.0
Mi-T-MA rotating nozzle with a 3.0 orifice, rated for 3600 PSI and 212°F. It turns a 0° stream into 25° coverage and comes with a filter and quick connec...
View full detailsMi-T-M 852-0156 Pressure Washer Hose – Kit - Vacuum Hose Connection
Mi-T-MThis kit lets you add extra hose to an existing suction hose. It contains one hose connector and two inlet cuff fittings, and Mi-T-M lists it among...
View full detailsMi-T-M 50-0167 Pressure Washer Hose – Assy - Hose To Wand (Swivel)
Mi-T-MA tapered cuff end fitting that joins the suction hose to the wand or to a hose connector. Mi-T-M lists it with its suction hoses and fittings for ...
View full detailsMi-T-M 15-0223 Pressure Washer Hose – Vacuum 1.5" Black
Mi-T-MA black 1 1/2-inch crushproof vacuum hose without fittings, sold by the foot up to 50 feet. It appears in Mi-T-M's suction hose listing for the 13 ...
View full detailsPressure Washer Parts and Accessories for Commercial Machines
A commercial pressure washer is a pump, a frame and a set of wear parts. The pump and frame last years. The wear parts do not, and a machine sitting idle for want of a twelve dollar o-ring costs more in lost hours than a shelf of spares would have. This range covers pump components and repair parts, valves, hoses, guns and wands, nozzles, and fittings.
Diagnose Before Replacing the Expensive Part
Lost pressure is the most common complaint and the pump is the most commonly blamed component, usually wrongly. Work outward from cheapest to costliest: a worn nozzle erodes wider and drops pressure in a way that mimics pump wear exactly. A blocked inlet filter starves the pump. A failing unloader valve dumps flow that should be reaching the gun. Only when those are ruled out does a pump rebuild make sense. Adjusting the unloader to chase pressure lost to a worn nozzle is how a cheap problem becomes a replacement pump.
Stock the Parts That Stop Work
Not all wear parts are equal in consequence. O-rings, nozzles, quick connect couplers and trigger guns are inexpensive and each one, when it fails, stops a crew completely. Pump repair kits and unloader valves cost more and fail less often, but the lead time on an unstocked one is measured in days of downtime. Frame parts, brackets and covers can wait. Keeping the first group on the shelf is the cheapest downtime insurance available for a machine in daily use.
Match Parts to the Machine, Not to What Looks Similar
Pressure and temperature ratings are the two that get overlooked. A part rated for a 3000 PSI cold water machine may physically fit a 5000 PSI hot water unit and fail under it, sometimes in an operator's hand. Thread standards compound the problem, because M22, NPT and BSP are close enough in size to start together without sealing. Check the model number on the machine plate against the part before ordering.
Cold weather adds one more failure mode. Water left in a pump through a hard freeze cracks the head, and that is a repair that dwarfs the cost of the winterizing fitting that would have prevented it.
Related: Pressure Washer Hoses · Pressure Washer Nozzles · Pressure Washer Guns & Wands · Pressure Washer Fittings & Couplers
Frequently Asked Questions
Why is my pressure washer losing pressure?
Which pressure washer parts should I keep in stock?
Will parts from a cold water machine fit a hot water one?
How do I find the right part for my pressure washer?
What causes a cracked pump head?
Let customers speak for us
from 97 reviewsPerfect vacuum cleaner. Well made , goes around chair & table legs easily
Nice compact scrubber/vacume. Works very well.
Fast shipping Great Experience
Great product
This vacuum is very light and powerful
Gets the job done without hassle. This vacuum is powerful and reliable for everyday cleaning. Definitely recommend it.
we have three cats, and this purifier has done wonders in removing pet odors and dander
Located in the Twin Cities in Minnesota, we acquired our Brio Air Filter in mid-late Spring of this year (2023) when pollen count was high and we were beginning to experience the effects of Poor Air Quality Index as a result of smoke particulates from fires in Canada that caused the air in much of Minnesota to become hazy and simply dirty.
It is so easy to share our experience with the Brio Air Filter given how quickly and efficiently it removed pollen, dust, and smoke particles from the environment inside our home. Two people in our home who suffer from pollen-related allergies during the spring immediately experienced easier breathing and elimination of symptoms within the house. With respect to smoke particulates from Canada drifting into our environment, EVERYONE in our home experienced directly improved breathing and smell of the air when entering from outside.
An additional piece of information to account for is that we have always employed high grade furnace filters in our home’s central HVAC system. With that high grade filtration in place both prior to and after acquiring a Brio home air filter, we all quickly agreed that deploying the Brio in our home made an easily noticeable positive difference in breathing inside our home. Additionally, those of us who clean our home have observed that dust builds up slower on our floors and furniture than before we deployed the Brio unit.
We did note that the Brio is not as quiet as a few other brands/models on the market that we have tried in our home but the efficiency and quality of the filtration, along with the air turnover rate it provides,allows us to locate the Brio unit in central rooms away from the bedrooms. Since we made that change there has been no noise-related effect on our sleep, while the unit maintains the same level of air cleanliness throughout our home.
A last key point to make is how easy the Brio unit is to maintain. The simplicity of the modular construction of the Brio unit makes it very quick and easy to keep the filtration sections clean. We have not yet reached a point of filter replacement but it is obvious to us that the replacement will take a matter of seconds and can be executed by anyone in our home, including our 10-year-old son.
this bedroom purifier has transformed my sleep quality. the air is so much fresher and cleaner worth every penny
Amazing customer service and reliable products
very customer friendly and professional design.
perfect for maneuvering in tight areas the HEPA filter is a huge bonus
It seems to help reduce my allergy issues. We're glad we bought it. The only problem I had was not seeing any cubic footage recommendations in the online description when purchasing the unit. Bedrooms vary widely in size!!
This vacuum has exceeded my expectations. It's super powerful and handles daily cleaning with ease. I recommend it to everyone.
really effective in sweeping up all kinds of debris from our warehouse floor