Products

Air filter canister assembly with a 4 1/8-inch diameter and a 1-inch male thread. It houses a paper filter element.Specifications4 1/8-inch diamete...

Paper filter element sized 4 1/8-inch diameter x 1-inch M. It is the replacement element for both the 19-0219 and 19-0240 canisters.Specifications ...

Paper filter bags for the Mi-T-M 9-gallon vacuum, sold 5 to a pack. They are disposable, meant for dry pickup, and suited to fine dust.Specificatio...

Paper air filter element for the 19-0225 canister. It measures 6-inch diameter with a 3/4-inch male thread.Specifications 6-inch diameter x 3/4-inc...

Hydro Flow replacement filter for Mi-T-M 13 and 18-gallon wet/dry vacuums. Order it when the filter in your vacuum is worn or damaged.

Air filter canister, 4 1/8-inch diameter, threaded 1/2-inch male. The canister holds a paper element that filters incoming air.Specifications4 1/8-...

Suction strainer, 4-inch, made of steel with round openings.

Replacement 10-micron filter, 20 inches long.Specifications20-inch filter

Paper filter bags for Mi-T-M 13 and 18-gallon vacuums, 10 bags per pack. Use them for dry pickup of fine dust and throw them away when full.Specifi...

Removable painted front panel for Mi-T-M equipment. It covers the front of the unit with a protective panel and gives it a more finished look.

Black, octagonal rain cap with a powder coated paint finish. It protects the boiler from moisture build-up when the unit is left outside.

Stainless-steel suction head, sold as the suction end replacement part.

Air regulator with 1/4-inch inlet and outlet ports. It reduces compressor line pressure and holds it steady so air tools run at a safe level, with ...

1/2-inch air regulator for larger air lines. It cuts supply pressure down to a steady working level for air tools and has a 1/4-inch gauge port.Spe...

Pressure gauge for monitoring tank and outlet pressures. Mi-T-M lists it with a 200-PSI maximum rating and a 1/8-inch MPT connection.Specifications...

Brass hex coupling with 1/4-inch female pipe threads on both ends. Use it to join two short air hoses into one longer hose. The brass construction ...

This brass barbed fitting has a 3/8-inch MNPT threaded end and a barb sized for 1/4-inch ID hose. Use it to assemble bulk hose or repair a damaged ...

A brass barbed hose fitting with a 1/4-inch MNPT thread on one side and a barb for 3/8-inch ID hose on the other. It is meant for making up hose fr...

Brass hex nipple with 1/4-inch male pipe threads on both ends. It joins two short hoses into one long hose, and the brass holds up against corrosio...

Air/liquid adapter kit for filling tires with liquid. It connects a standard tractor valve to a 3/4-inch garden hose bibb, and a push-button bleede...

This brass barbed splicer joins two sections of 3/8-inch I.D. hose, so a damaged hose can be repaired by cutting out the bad part and reconnecting ...

Steel hex nipple, 1/2-inch x 1/4-inch, for when you have a female NPT thread and need a male NPT thread. The steel resists corrosion.Specifications...

A 3/8-inch high temp silicon o-ring rated to 400°F. It gives the quick connect socket on hot water outlets a tight fit and keeps it from leaking.Sp...

This 1/4-inch o-ring is made of high temp silicon and rated for 400°F. It seals the quick connect socket on the wand so the connection stays tight ...