Skip to content

Free Shipping on Most Orders

Orders over $300 ship free to the continental US. Threshold may vary by brand.

Expert Support

Talk to a specialist — not a call center.
+1 978-295-7538

30-Day Returns

Not the right machine? Return or exchange within 30 days, no hassle.

Authorized Dealer

30 pro brands sold direct. Full manufacturer warranties honored.

Pressure Washers for Sidewalks

Professional pressure washers specifically designed for sidewalks. Our selection from Mi-T-M includes 62+ models engineered to meet the unique challenges of sidewalks environments.

Original price $7,775.00 - Original price $7,775.00
Original price
$7,775.00
$7,775.00 - $7,775.00
Current price $7,775.00

Mi-T-M CWC-5005-4MGM CWC Gasoline Belt Drive Pressure Washer – 5000 PSI, 449 lbs

Mi-T-M
In stock

Mi-T-M CWC Premium Series Gasoline Belt Drive – CWC-5005-4MGM The Mi-T-M CWC Premium Series Gasoline Belt Drive – CWC-5005-4MGM is a professional-g...

View full details
Original price $7,775.00 - Original price $7,775.00
Original price
$7,775.00
$7,775.00 - $7,775.00
Current price $7,775.00
Original price $9,370.00 - Original price $9,370.00
Original price
$9,370.00
$9,370.00 - $9,370.00
Current price $9,370.00

Mi-T-M CWC-5005-4MGH CWC Gasoline Belt Drive Pressure Washer – 5000 PSI, 449 lbs

Mi-T-M
In stock

Mi-T-M CWC Premium Series Gasoline Belt Drive – CWC-5005-4MGH The Mi-T-M CWC Premium Series Gasoline Belt Drive – CWC-5005-4MGH is built for indust...

View full details
Original price $9,370.00 - Original price $9,370.00
Original price
$9,370.00
$9,370.00 - $9,370.00
Current price $9,370.00
Original price $8,460.00 - Original price $8,460.00
Original price
$8,460.00
$8,460.00 - $8,460.00
Current price $8,460.00

Mi-T-M CWC-5004-4MGH Belt Drive Pressure Washer – 5000 PSI, Honda GX630, General

Mi-T-M
In stock

Mi-T-M CWC-5004-4MGH Belt Drive Pressure Washer – 5000 PSI, Honda GX630, General The Mi-T-M CWC-5004-4MGH delivers 5,000 PSI at 4.0 GPM through a 6...

View full details
Original price $8,460.00 - Original price $8,460.00
Original price
$8,460.00
$8,460.00 - $8,460.00
Current price $8,460.00
Original price $7,665.00 - Original price $7,665.00
Original price
$7,665.00
$7,665.00 - $7,665.00
Current price $7,665.00

Mi-T-M CWC-5004-4MAV Belt Drive Pressure Washer – 5000 PSI, Vanguard 627cc, AR

Mi-T-M
In stock

Mi-T-M CWC-5004-4MAV Belt Drive Pressure Washer – 5000 PSI, Vanguard 627cc The Mi-T-M CWC-5004-4MAV delivers 5,000 PSI at 4.0 GPM via a 627cc Vangu...

View full details
Original price $7,665.00 - Original price $7,665.00
Original price
$7,665.00
$7,665.00 - $7,665.00
Current price $7,665.00
Original price $6,961.00 - Original price $6,961.00
Original price
$6,961.00
$6,961.00 - $6,961.00
Current price $6,961.00

Mi-T-M CWC-5004-4MAM Belt Drive Pressure Washer – 5000 PSI, 670cc OHV, AR

Mi-T-M
In stock

Mi-T-M CWC-5004-4MAM Belt Drive Pressure Washer – 5000 PSI, Mi-T-M 670cc The Mi-T-M CWC-5004-4MAM delivers 5,000 PSI at 4.0 GPM via a 670cc Mi-T-M ...

View full details
Original price $6,961.00 - Original price $6,961.00
Original price
$6,961.00
$6,961.00 - $6,961.00
Current price $6,961.00
Original price $7,755.00 - Original price $7,755.00
Original price
$7,755.00
$7,755.00 - $7,755.00
Current price $7,755.00

Mi-T-M CWC-5004-4MAH Belt Drive Pressure Washer – 5000 PSI, Honda GX630, AR

Mi-T-M
In stock

Mi-T-M CWC-5004-4MAH Belt Drive Pressure Washer – 5000 PSI, Honda GX630 The Mi-T-M CWC-5004-4MAH delivers 5,000 PSI at 4.0 GPM via a 688cc Honda GX...

View full details
Original price $7,755.00 - Original price $7,755.00
Original price
$7,755.00
$7,755.00 - $7,755.00
Current price $7,755.00

Pressure Washers for Sidewalks and Walkways

What Pressure Cleans Concrete Walkways Safely?

3,000 to 3,500 PSI with a 16 to 20 inch surface cleaner cleans concrete walkways evenly and avoids the stripes a wand leaves. Keep the tip moving at a consistent distance so you do not etch lines into the surface, and step the pressure down or widen the tip on decorative, stamped, or colored concrete that scars easily. A smaller surface cleaner is often better on sidewalks than a large one, since it follows narrow paths and curves without overhanging the edge into landscaping.

How Do You Remove Gum and Set-In Stains?

Gum and ground-in stains need hot water or a targeted degreaser plus concentrated pressure, since cold water alone will not release them. Spot-treat the mark with heat or a citrus or alkaline remover first, give it a few minutes, then clean the surrounding area with the surface cleaner so the whole walkway matches rather than leaving clean halos around each spot. A rotating turbo nozzle handles isolated gum spots faster than a fan tip.

Why Use a Surface Cleaner on Public Walkways?

A surface cleaner runs two nozzles under a hood to clean a wide, even path quickly, which matters on long public sidewalks where appearance counts and speed drives labor cost. It also keeps you from over-etching the lines that a fixed wand tip can carve into concrete when an operator pauses. Match the cleaner's rated GPM to your machine so the bars spin at full speed, and add a wand for edges and corners the round hood cannot reach.

Related: Pressure Washers for Concrete · Hot Water Pressure Washers · Pressure Washers for Parking Lots · Pressure Washers

Frequently Asked Questions

What pressure washer cleans sidewalks and walkways?
Sidewalks are best cleaned with 3,000 PSI and a surface cleaner attachment, which covers the concrete evenly and avoids the stripes a wand leaves. Gas suits long outdoor runs with no power nearby.
How do I remove gum and stains from sidewalks?
Gum and set-in stains need hot water or a targeted degreaser plus concentrated pressure, since cold water will not release them. Spot-treat with heat or chemical, then clean the surrounding area with a surface cleaner.
Why use a surface cleaner on sidewalks?
A surface cleaner cleans a wide, even path quickly with no wand stripes, which matters on long public walkways where appearance counts. It also keeps you from over-etching lines into the concrete.
What PSI is safe for concrete walkways?
3,000 to 3,500 PSI cleans concrete walkways well. Keep the tip moving and at a consistent distance to avoid etching lines, and step down the pressure on decorative or stamped concrete.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare