Questions? Call us!
+1 978-295-7538
Mon-Fri: 9AM - 5PM EST
Free Shipping on Most Orders
Orders over $300 ship free to the continental US. Threshold may vary by brand.
Expert Support
Talk to a specialist — not a call center.
+1 978-295-7538
30-Day Returns
Not the right machine? Return or exchange within 30 days, no hassle.
Authorized Dealer
30 pro brands sold direct. Full manufacturer warranties honored.
Dry Vapor Steam Cleaners: Under-5% Moisture for Surfaces That Can't Get Wet
What "Dry Vapor" Actually Means on a Spec Sheet
Here's what we see constantly: facilities buy a "steam cleaner" labeled chemical-free, use it on a control panel or a hospital bedrail, and end up with water intrusion damage. Standard wet-steam units output 30–40% moisture content. Dry vapor runs under 5%. The difference matters when the substrate is electronics, food-contact stainless, sealed flooring, or upholstery. The Therma-Kleen TS.75 (80 PSI, 300°F, made in USA), Therma-Kleen Ultra 600E (600 PSI, 275°F, 3-phase), and Vapamore MR-1000 Forza (90 PSI, 284°F) deliver 4–6% moisture content at the wand — measured with a thermo-hygrometer at the discharge nozzle, not at the boiler. The tradeoff: dry vapor takes more passes to lift heavy soil that wet steam blows off in one pass. For sanitization-first applications, that's an acceptable trade.
Picking PSI and Boiler Type by Application
For HACCP food contact zones — slicers, conveyor rollers, walk-in seals — the Vapamore MR-750 Ottimo (75 PSI, 4L boiler, 3-hour runtime) and NaceCare JS 1600C (115 PSI, 338°F, continuous flow) hit the temperature threshold for surface kill of Listeria and Salmonella while leaving the surface dry to spec within 60 seconds. For healthcare equipment and dental ops, the Therma-Kleen TS10 (100 PSI, 330°F, 1500W) is sized for portable cart use without 3-phase wiring. For automotive detail, manufacturing degrease, and mold remediation, the Therma-Kleen Ultra 600 propane (600 PSI, 350°F, 1.5 GPM) and Fortador Pro Hybrid Diesel run on-site without 480V power. PSI matters more than boiler size for dwell-time efficiency at the surface — high PSI means shorter dwell, which means more square feet per shift.
Related: Commercial Steam Cleaners · Steam Cleaners for Bed Bugs · Industrial Steam Cleaners · Food Service Steam Cleaners
Continuous-Fill vs. Batch Boilers and What Breaks First
Batch boilers (Therma-Kleen TS.75, Vapamore MR-75 Amico) heat a tank, run 60–90 minutes, then need a 10-minute cool-down to refill. Continuous-fill units (Therma-Kleen THE-IN4, NaceCare JS 1600C) run indefinitely. For under 90-minute jobs, batch is fine and costs less. For full-shift runs, continuous-fill saves the cool-down hour over an 8-hour day. The first failure point on either type is the heating element scaling — distilled or RO water only, never tap. Run a vinegar descale cycle quarterly even on filtered water. All prices shown — no quote needed. Questions about a specific application? Call us.