Skip to content

Free Shipping on Most Orders

Orders over $300 ship free to the continental US. Threshold may vary by brand.

Expert Support

Talk to a specialist — not a call center.
+1 978-295-7538

30-Day Returns

Not the right machine? Return or exchange within 30 days, no hassle.

Authorized Dealer

30 pro brands sold direct. Full manufacturer warranties honored.

Stainless Steel Desiccant Dehumidifiers

Bry-Air MiniPAC desiccant dehumidifiers in corrosion-resistant stainless steel, from MP-600 to MP-2700. Built for pharmaceutical, food, and process environments needing deep, low-temperature humidity control.

Original price $12,000.00 - Original price $15,985.00
Original price
$12,000.00 - $15,985.00
$12,000.00 - $15,985.00
Current price $12,000.00

Bry-Air MiniPAC MP-175 Desiccant Dehumidifier – Stainless Steel

Bry-Air
In stock

MP-175 Desiccant Dehumidifier — Low-Humidity Control Below Refrigerant Limits Made to order — estimated 5-week lead time. The Bry-Air MiniPAC MP-...

View full details
Original price $12,000.00 - Original price $15,985.00
Original price
$12,000.00 - $15,985.00
$12,000.00 - $15,985.00
Current price $12,000.00

Stainless Steel Desiccant Dehumidifiers for Sanitary, Food-Grade, and Pharmaceutical Environments

Where Stainless Steel Construction Matters in Desiccant Dehumidification

Standard painted-steel desiccant dehumidifiers do not survive the chemistry of sanitary process environments. Caustic CIP washdowns, salt aerosol from cold-room operations, and chlorine residue from pharmaceutical surface disinfection corrode painted housings within months and contaminate nearby product zones with rust flake. Stainless steel housings — typically 304-grade construction on the Bry-Air MiniPAC line — resist these chemistries indefinitely, which is why FDA-audited pharmaceutical drying suites, food and beverage cold storage, USDA meat-processing rooms, lithium battery dry rooms, and electronics cleanroom adjacencies specify stainless construction in their equipment standards rather than treating it as an upgrade.

Bry-Air MiniPAC Sizing From 100 CFM Single-Room Use to 2,700 CFM Whole-Plant Drying

The Bry-Air MiniPAC stainless steel line covers seven discrete capacity points so designers can match airflow to actual process moisture load instead of oversizing. The MP-100 at 100 CFM handles single rooms — pharmacy compounding hoods, small cold rooms, single-line packaging zones. The MP-175 and MP-350 cover mid-size suites — pilot lines, walk-in environmental chambers, multi-station packaging cells. The MP-600 and MP-1200 step up to plant-section scale — full meat or cheese cure rooms, lithium battery dry rooms, and mid-volume confectionery operations. The MP-1800 and MP-2700 run whole-facility duty for pharmaceutical drying suites and large cold-storage warehouses where ambient dew point must hold below 40°F continuously across thousands of square feet. Each frame is rated for 208–240V or 460V three-phase service depending on capacity, with reactivation heater sizing adjusted to the airflow class.

Related: Desiccant Dehumidifiers · Commercial Dehumidifiers · Bry-Air Equipment · All Dehumidifiers

Construction Details That Separate a True Stainless Build From a Painted Conversion

Beyond the outer housing, the right stainless desiccant build addresses three secondary corrosion paths that cheaper conversions skip. The reactivation heater enclosure has to be stainless throughout — not just the outer skin — because heater chamber air carries the same corrosive load as the room. The condensate pan and drain plumbing need to be stainless because acidic condensate from regeneration cycles eats carbon steel pans within a season of operation in cold-room duty. Internal ductwork seams should be welded rather than mechanically joined, since lap seams trap moisture and biofilm in food-contact zones where USDA inspections measure crevice contamination. Bry-Air MiniPAC stainless models use stainless construction across the housing, heater chamber, condensate handling, and air-stream surfaces — the configuration auditors look for when reviewing equipment placed adjacent to GMP zones or USDA-inspected production lines.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare