Questions? Call us!
+1 978-295-7538
Mon-Fri: 9AM - 5PM EST
Free Shipping on Most Orders
Orders over $300 ship free to the continental US. Threshold may vary by brand.
Expert Support
Talk to a specialist — not a call center.
+1 978-295-7538
30-Day Returns
Not the right machine? Return or exchange within 30 days, no hassle.
Authorized Dealer
30 pro brands sold direct. Full manufacturer warranties honored.
Commercial Electric Pressure Washers for Indoor and Emission-Free Cleaning
Where Electric Pressure Washers Replace Gas on the Job
Electric pressure washers occupy the indoor, low-noise, and emission-restricted side of commercial cleaning where gas-engine units cannot operate. Parking garages, covered loading docks, food processing plants, hospital exteriors, school facilities, and any space where carbon-monoxide exposure exceeds the OSHA permissible exposure limit within minutes default to electric units regardless of operator preference. Operating cost shifts from fuel and carburetor maintenance to per-kWh electricity — typically 60–75 percent cheaper per operating hour in US commercial rate structures. Cold-start performance is instant: no choke, no warm-up, no fuel mixing, no oil changes. The trade-off is power-tether constraint and amperage ceiling: 120V/15A units cap at 1,500–1,800 PSI, 120V/20A at 2,000 PSI, 230V single-phase at 2,500–3,000 PSI, and 230V/460V three-phase opens the range above 3,000 PSI for industrial wash bays.
Mi-T-M Electric Pressure Washer Range: 1,000 to 3,000 PSI
The Mi-T-M electric lineup covers four series. ChoreMaster (CM-1400) is the light-commercial entry tier — 1,400 PSI, 1.5 GPM, 1.5 HP triplex pump, 120V GFCI cord. Hand-carry and cart-mount frames at 45–54 lbs. CD (Commercial Direct Drive) steps up to 1,000–1,500 PSI at 2.0 GPM with 1.5–2 HP brass-head pumps for food-service and light-industrial work. JP Series Electric covers the broadest range: JP-1002 / JP-1502 at 1,000–1,500 PSI, JP-2003 at 2,000 PSI on 230V single-phase, JP-2503 at 2,500 PSI in both 230V single-phase (-2ME1) and 230V/460V three-phase (-1ME3) configurations, and JP-3004 at 3,000 PSI with 3.9 HP motor on 230V single-phase or 8 HP three-phase. CW Series Electric Belt Drive (CW-2405-5ME1, CW-3004-5ME1) tops the range with 230V 8 HP motors and General triplex belt-drive pumps for daily industrial wash-bay service.
Related: Pressure Washers · Commercial Pressure Washers · Gas Pressure Washers · Hot Water Pressure Washers · Mi-T-M Equipment
Power Spec: 120V, 230V Single-Phase, and 3-Phase Selection
120V/15A units run on standard wall outlets and ship with a 35-foot GFCI cord — the right pick for occasional indoor cleaning in food service, building maintenance, and equipment rinsing where the operator runs the unit a few hours per week. 120V/20A doubles the amperage but requires a dedicated 20A circuit and a NEMA 5-20 outlet. 230V single-phase opens the range above 2,000 PSI for daily commercial work in auto shops, building exterior cleaning, and fleet wash bays — needs a dedicated NEMA 6-50 outlet rated for 250V/50A. 230V/460V three-phase serves industrial wash bays running multiple shifts, where the higher voltage delivers cleaner motor performance under sustained load and longer motor life. Three-phase units cannot run on single-phase service — the building must have three-phase utility supply, which limits siting to industrial buildings and commercial complexes with that infrastructure.