{"product_id":"novatek-phs1hdl","title":"Novatek HD-SH1 Long Handle - 1Pc Head – PHS1HDL","description":"\u003ch2\u003eNovatek HD-SH1 Single Scaling Hammer (Long Handle) for Heavy Coating and Rust Removal\u003c\/h2\u003e\u003cp\u003eThe HD-SH1 long-handle scaling hammer drives one tungsten carbide cruciform piston at 2,500 blows per minute, fracturing material that needle scalers leave behind. Crews running structural steel repaints, marine deck recoats, and concrete prep use it on pack rust, laminar rust, thick mill scale, epoxy, and non-skid coatings. The 18-inch handle adds standoff distance, so operators reach deck plate, beam webs, and floor-level work without bending over the tool.\u003c\/p\u003e\u003ch3\u003eHD-SH1 Long Handle: Single-Piston Control with Extended Reach\u003c\/h3\u003e\u003cp\u003eThe single-piston head concentrates the full air charge into one impact point, which gives the operator close control along edges, weld seams, and around fittings where a triple head is too wide. Choosing the long handle over the 9-inch short handle trades some maneuverability in tight quarters for reach and a more upright working posture on deck and slab surfaces. The screw-top cap opens for head and piston replacement without a press, and a nylon brush seal wipes the piston on every stroke to extend service life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne tungsten carbide cruciform piston at 2,500 BPM concentrates impact for edge work, weld seams, and detail areas\u003c\/li\u003e\n\u003cli\u003e18-inch handle keeps the operator upright on deck and slab work and reaches floor-level surfaces without crouching\u003c\/li\u003e\n\u003cli\u003eRuns on 6.5 CFM, so one mid-size compressor can supply the tool through a full shift\u003c\/li\u003e\n\u003cli\u003eSingle-piston layout is narrower than the triple head for work around bolts, flanges, and fittings\u003c\/li\u003e\n\u003cli\u003eScrew-top cap allows field replacement of the head and piston without removing the tool from service for long\u003c\/li\u003e\n\u003cli\u003eNylon brush seal cleans the piston each stroke to reduce grit wear\u003c\/li\u003e\n\u003cli\u003eOptional tungsten carbide bush hammer head converts the tool for concrete texturing and aggregate exposure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHD-SH1 Long Handle Applications and Environments\u003c\/h3\u003e\u003cp\u003eStructural steel: removes pack rust, laminar rust, and high-build coatings from beams, plate, and weldments. Marine: strips deck coatings, non-skid, and corrosion on hulls and superstructure. Concrete: rapid take-down of slab surfaces, plus texturing and aggregate exposure for bonding overlays when fitted with the bush hammer head.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart No.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePHS1HDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle head, long handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTungsten carbide cruciform, single-piece piston (bush hammer optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBlows Per Minute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2,500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 CFM (186 lpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCylinder Bore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.06 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePiston Stroke\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.04 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHandle Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 in (457 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Novatek","offers":[{"title":"Default Title","offer_id":48455145324701,"sku":"PHS1HDL","price":371.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/phs1hdl.webp?v=1781721358","url":"https:\/\/uscleaningtools.com\/products\/novatek-phs1hdl","provider":"US Cleaning Tools","version":"1.0","type":"link"}