{"title":"Portable Carpet Extractors","description":"\u003ch2\u003ePortable Carpet Cleaners: Spot Extractors for Mobile and On-Site Work\u003c\/h2\u003e\n\n\u003ch3\u003eHeated vs. Unheated: When Heat Improves Extraction Results\u003c\/h3\u003e\n\u003cp\u003eHeat speeds emulsification of grease and oil-based soils — meaningful for automotive interiors, upholstery, and pet stains where cold water extraction may require multiple passes. The \u003ca href=\"\/products\/u-s-products-cobra-mini-750h-heated-portable-spot-extractor-with-trident-uph-4-upholstery-wand-amp-10-hose-05-10020-p5\"\u003eU.S. Products Cobra Mini 750H\u003c\/a\u003e adds an inline heater to the Cobra platform, reaching cleaning temperature within minutes. For jobs where soiling is fiber-based — mud, food, general carpet traffic — an unheated model like the Sandia 55 PSI Spot Extractor handles most conditions at lower weight and cost. Heated models cost more upfront but reduce chemical consumption and passes-per-spot on oily or greasy soils, which matters for high-volume mobile detailing or restoration routes.\u003c\/p\u003e\n\n\u003ch3\u003ePSI and Tank Size for Automotive and Spot Work\u003c\/h3\u003e\n\u003cp\u003ePortable carpet cleaners in this range operate at 55–100 PSI spray pressure with 2–3 gallon solution tanks. Higher PSI drives cleaning solution deeper into carpet pile; the Sandia 100 PSI Super Spotter models deliver extraction force for embedded commercial carpet soiling. For automotive interiors and fabric seating, 55 PSI prevents over-wetting thin-backed vehicle carpet — the \u003ca href=\"\/collections\/carpet-extractors\"\u003e3-gallon 55 PSI spot extractor\u003c\/a\u003e is well-matched to vehicle carpet and fabric seats. Three gallons handles 6–10 automotive interiors before refilling, which works for most mobile detailing operations without mid-job stops.\u003c\/p\u003e\n\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/carpet-extractors-for-auto-detailing\"\u003eCarpet Extractors for Auto Detailing\u003c\/a\u003e · \u003ca href=\"\/collections\/carpet-cleaning\"\u003eCommercial Carpet Cleaning\u003c\/a\u003e · \u003ca href=\"\/collections\/upholstery-extractors\"\u003eUpholstery Cleaning Equipment\u003c\/a\u003e · \u003ca href=\"\/collections\/floor-scrubbers\"\u003eFloor Scrubbers\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAccessories and Kit Compatibility\u003c\/h3\u003e\n\u003cp\u003eSandia spot extractors use a standardized 4\" upholstery wand and stainless steel tool system across the 2 and 3 gallon line — the same hose sets, wands, and accessories work across models, which simplifies consumable stocking for a mixed fleet. The Sandia stainless steel spotter wand and 875W heater kit are available separately for upgrading existing machines. U.S. Products Cobra Mini kits ship with a Trident UPH 4\" upholstery wand and 10-foot hose included. Order replacement bags and filters before multi-day jobs: running out of consumables mid-route is avoidable with a small on-truck stock. All models ship free from our warehouse.\u003c\/p\u003e","products":[{"product_id":"sandia-3-gallon-spot-extractor-kit","title":"Sandia 50-1000 Spot Extractor – 55 PSI, 2-Stage 804W Motor, 3-Gallon","description":"\u003ch2\u003eSandia 50-1000 Spot Extractor: 55 PSI Pump, 2-Stage Motor, 3-Gallon Tanks\u003c\/h2\u003e\n\u003cp\u003eThe Sandia 50-1000 is a lightweight spot extractor built for quick stain removal on carpets, rugs, and upholstery. The 2-stage Ametek motor produces 100 CFM airflow and 76\" of water lift, pulling moisture out of fabric effectively despite the compact 19-lb frame. A 55 PSI pump ships standard; the 100 PSI pump option is available for operators who need more solution penetration on stubborn stains or automotive interiors.\u003c\/p\u003e\n\u003ch3\u003e50-1000 Pump, Motor, and Tank Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e55 PSI pump standard — upgrade to 100 PSI available for deeper stain penetration\u003c\/li\u003e\n\u003cli\u003e2-stage Ametek motor: 804 watts, 100 CFM airflow, 76\" water lift\u003c\/li\u003e\n\u003cli\u003e3-gallon solution tank and 3-gallon recovery tank — roto-molded polyethylene construction\u003c\/li\u003e\n\u003cli\u003eSlide-out handle and double ball-bearing urethane wheels for smooth transport\u003c\/li\u003e\n\u003cli\u003e20-ft, 16\/3-gauge safety power cord\u003c\/li\u003e\n\u003cli\u003eShips with Model 50-1000 clear-view upholstery tool and 1.25\" × 7-ft vacuum and solution hoses\u003c\/li\u003e\n\u003cli\u003e115V standard; 230V available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e50-1000 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe 50-1000 fits cleaning technicians who handle spot treatment calls between full extraction jobs, auto detailers cleaning seat fabric and floor mats, and hospitality staff dealing with spills in guest rooms or lobbies. At 19 lbs, it carries easily up stairs and fits in a vehicle trunk or van without occupying significant cargo space. The roto-molded polyethylene body resists dents and cracks in transport, making it practical for multi-stop routes. The clear-view upholstery tool included with the 50-1000 allows operators to see solution extraction progress during upholstery work — a practical detail for checking saturation levels on delicate fabrics.\u003c\/p\u003e\n\u003ch3\u003ePSI, Water Lift, and What's Included\u003c\/h3\u003e\n\u003cp\u003eThe 50-1000 ships with a 55 PSI pump, 2-stage Ametek motor (804W, 100 CFM, 76\" water lift), 3-gallon tanks, 20-ft cord, clear-view upholstery tool, and 7-ft hoses. The 100 PSI pump upgrade is a factory option at order time.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSolution Pump\u003c\/th\u003e\n\u003ctd\u003e55 PSI (100 PSI upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVacuum Motor\u003c\/th\u003e\n\u003ctd\u003e2-Stage Ametek, 804W, 100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater Lift\u003c\/th\u003e\n\u003ctd\u003e76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolution Tank\u003c\/th\u003e\n\u003ctd\u003e3 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecovery Tank\u003c\/th\u003e\n\u003ctd\u003e3 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Cord\u003c\/th\u003e\n\u003ctd\u003e20 ft, 16\/3 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115V (230V available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21\" L × 10\" W × 19\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"3-Gallon Spot Extractor with Clear View Plastic Upholstery Tool","offer_id":46076296069277,"sku":"50-1000","price":909.0,"currency_code":"USD","in_stock":true},{"title":"3-Gallon Spot Extractor with Stainless Steel Upholstery Tool","offer_id":46076296102045,"sku":"50-1001","price":969.0,"currency_code":"USD","in_stock":true},{"title":"3-Gallon Spot Extractor (Machine Only) – No Hoses No Upholstery Tool","offer_id":46076296134813,"sku":"50-1002","price":829.0,"currency_code":"USD","in_stock":true},{"title":"Super 3-Gallon Spot Extractor with Clear View Plastic Upholstery Tool","offer_id":46076296167581,"sku":"50-3000","price":1009.0,"currency_code":"USD","in_stock":true},{"title":"Super 3-Gallon Spot Extractor with Stainless Steel Upholstery Tool","offer_id":46076296200349,"sku":"50-3001","price":1069.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/50-1001-3-Gallon-Spot-Extractor.webp?v=1754754681"},{"product_id":"sandia-2-gallon-spot-extractor-kit","title":"Sandia 50-2000 Spot Extractor – 55 PSI, 1-Stage 804W Motor, 2-Gallon","description":"\u003ch2\u003eSandia 50-2000 Spot Extractor: 2-Gallon, 55 PSI, 1-Stage Ametek Motor\u003c\/h2\u003e\n\u003cp\u003eThe Sandia 50-2000 is the smallest extractor in the Sandia spot extractor line, designed for light-duty stain removal where portability outweighs tank capacity. At 15 lbs with 2-gallon tanks, it fits in a car trunk and handles carpet spots, vehicle seat fabric, and upholstery without the setup time of a larger extraction unit. The 1-stage Ametek motor delivers 804 watts and 100 CFM, providing the same airflow as the 3-gallon 50-1000 in a lighter chassis.\u003c\/p\u003e\n\u003ch3\u003e50-2000 Pump, Motor, and Tank Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e55 PSI PumpTec pump for carpet and upholstery spot extraction\u003c\/li\u003e\n\u003cli\u003e1-stage Ametek motor: 804 watts, 100 CFM airflow, 76\" water lift\u003c\/li\u003e\n\u003cli\u003e2-gallon solution tank and 2-gallon recovery tank — roto-molded polyethylene\u003c\/li\u003e\n\u003cli\u003eDual fill and dump ports for fast turnaround between spots\u003c\/li\u003e\n\u003cli\u003eBuilt-in molded handle — no slide-out handle assembly\u003c\/li\u003e\n\u003cli\u003e20-ft, 16\/3-gauge safety power cord\u003c\/li\u003e\n\u003cli\u003eShips with 4\" clear-view upholstery tool and 1.25\" vacuum and solution hoses\u003c\/li\u003e\n\u003cli\u003e115V standard; 230V available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e50-2000 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe 50-2000 fits auto detailers, hospitality staff, and homeowners who need a compact spot cleaner for individual spills rather than full floor extraction. It handles car seat fabric, upholstery sections, area rug spots, and hotel guest room stains without requiring a cart or van to transport. At 15 lbs, it's lighter than most backpack vacuums and small enough to store in a closet between uses. The 2-gallon tank limits run time compared to the 3-gallon 50-1000, but for single-room or single-vehicle spot jobs, the reduced tank weight is a practical tradeoff.\u003c\/p\u003e\n\u003ch3\u003ePSI, Water Lift, and What's Included\u003c\/h3\u003e\n\u003cp\u003eThe 50-2000 ships with a 55 PSI pump, 1-stage Ametek motor (804W, 100 CFM, 76\" water lift), 2-gallon tanks, 20-ft cord, 4\" clear-view upholstery tool, and 1.25\" hoses.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSolution Pump\u003c\/th\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVacuum Motor\u003c\/th\u003e\n\u003ctd\u003e1-Stage Ametek, 804W, 100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater Lift\u003c\/th\u003e\n\u003ctd\u003e76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolution Tank\u003c\/th\u003e\n\u003ctd\u003e2 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecovery Tank\u003c\/th\u003e\n\u003ctd\u003e2 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Cord\u003c\/th\u003e\n\u003ctd\u003e20 ft, 16\/3 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115V (230V available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17\" L × 20\" W × 8\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076296790173,"sku":"50-2000","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/2-Gallon-Spot-Extractor.webp?v=1764530625"},{"product_id":"sandia-10-0450-a-7-external-vacuum-and-solution-hoses-for-2-and-3-gallon-spot-extractors","title":"Sandia 10-0450 External Hoses for 2 \u0026 3 Gal Spot Extractors – 7 ft","description":"\u003ch2\u003e7-Foot External Vacuum and Solution Hoses for Sandia 2 and 3 Gallon Spot Extractors – 10-0450\u003c\/h2\u003e\u003cp\u003eThe Sandia 10-0450 hose set pairs a 7-foot vacuum hose and a 7-foot solution hose for use with 2-gallon and 3-gallon Sandia spot extractors. The hoses are designed to attach together for streamlined storage and handling, reducing tangling between extraction cycles and keeping equipment organized in hotel carts and service vans.\u003c\/p\u003e\u003ch3\u003e10-0450 Hose Pair Construction\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-foot paired length\u003c\/strong\u003e — matched vacuum and solution hoses allow full operating reach from a stationary extractor position without constant repositioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttached hose design\u003c\/strong\u003e — vacuum and solution hoses are fastened together for tidy storage and prevent individual hose loss during multi-room cleaning routes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal connection\u003c\/strong\u003e — connects externally at the machine, making swap-outs fast without disassembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Sandia specification\u003c\/strong\u003e — ensures correct fitting diameters at both the extractor port and the hand tool connection, preserving solution delivery pressure up to 55 PSI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable hose material\u003c\/strong\u003e — rated for frequent bending and chemical contact from carpet extraction solutions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere These Hoses Are Deployed\u003c\/h3\u003e\u003cp\u003eCarpet cleaning services use the 10-0450 hose pair as primary or backup inventory for spot extractors on commercial routes covering offices, hotels, and healthcare facilities. Restoration contractors keep a spare set in their vehicles to avoid job delays when a hose cracks or loses pressure mid-remediation. Janitorial supply operations that service Sandia equipment sell these as the standard replacement set. Auto detailers who use spot extractors for interior upholstery cleaning rely on the 7-foot reach for working around seat rows and cargo areas.\u003c\/p\u003e\u003ch3\u003eCompatibility and What Ships in the Box\u003c\/h3\u003e\u003cp\u003eCompatible with Sandia spot extractor models 50-2000 (2-gallon) and 50-1000 and 50-4000 (3-gallon). Ships as one attached pair: vacuum hose with 1.5-inch connection and solution hose with quick connect fitting. No hand tool is included. This is a genuine Sandia OEM part promoting machine longevity and optimal pump performance.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e10-0450 \/ 10-0450-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose Length\u003c\/th\u003e\n\u003ctd\u003e7 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eAttached vacuum and solution hose pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003eExternal (at machine body)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003eSandia 50-2000, 50-1000, 50-4000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSandia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076322119837,"sku":"10-0450","price":102.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/download_39.webp?v=1729330542"},{"product_id":"sandia-10-0300-55-psi-spotter-pump-for-2-3-gal-spotters","title":"Sandia 10-0300 55 PSI Spotter Pump – 2 \u0026 3 Gallon Spot Extractors","description":"\u003ch2\u003eOEM 55 PSI Replacement Spotter Pump for Sandia 2 and 3 Gallon Spot Extractors – 10-0300\u003c\/h2\u003e\u003cp\u003eThe Sandia 10-0300 is the OEM 55 PSI pump for Sandia 2-gallon and 3-gallon spot extractors. The pump pressurizes cleaning solution delivery to the hand tool, driving solution into carpet and upholstery fibers during extraction. When the pump fails or loses pressure, soil dwell and extraction performance drops — the 10-0300 OEM replacement restores solution delivery to the rated 55 PSI specification.\u003c\/p\u003e\u003ch3\u003e10-0300 Pump Specifications and Performance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 PSI operating pressure\u003c\/strong\u003e — delivers solution at the factory-rated pressure for Sandia 2-gallon and 3-gallon spot extractors, matching original cleaning performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Sandia part\u003c\/strong\u003e — designed to fit the pump housing in the extractor body without modification, using the same inlet and outlet port dimensions as the original.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores solution delivery\u003c\/strong\u003e — a weak or failed pump allows operators to vacuum but not spray, cutting soil dwell time and degrading spot cleaning results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with standard and heated models\u003c\/strong\u003e — the 10-0300 pump operates across the Sandia spotter line including models with inline heaters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable pump construction\u003c\/strong\u003e — built for the repeated duty cycles of commercial spot cleaning in high-volume hotel and facility environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePump Replacement Scenarios\u003c\/h3\u003e\u003cp\u003eRestoration contractors replace the 10-0300 when a spotter loses solution output mid-job on water damage cleanup. Hotel housekeeping departments use OEM pump replacement to extend the service life of spot extractors running daily across dozens of guest rooms. Carpet cleaning equipment dealers service and rebuild Sandia spotters using the 10-0300 as the standard pump replacement part. Janitorial supply companies that maintain client equipment stock this pump as one of the highest-turnover Sandia service parts.\u003c\/p\u003e\u003ch3\u003eCompatibility and Box Contents\u003c\/h3\u003e\u003cp\u003eCompatible with Sandia spot extractor models 50-2000 (2-gallon) and 50-1000, 50-4000 (3-gallon), including heated models. Ships as one 10-0300 55 PSI pump assembly. No additional hardware or fittings are included. Refer to Sandia's service documentation for pump inlet\/outlet torque specifications before installation.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e10-0300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump Pressure\u003c\/th\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003eSandia 50-2000, 50-1000, 50-4000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Tank Sizes\u003c\/th\u003e\n\u003ctd\u003e2-gallon, 3-gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003ePump assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSandia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076325560477,"sku":"10-0300","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/download_32.webp?v=1729330562"},{"product_id":"sandia-10-0910-sp-875-watt-heater-for-2-and-3-gallon-spot-extractors","title":"Sandia 10-0910-SP Inline Heater 600\/875W – 2 \u0026 3 Gal Spot Extractors","description":"\u003ch2\u003eInline Heater Upgrade for Sandia 2 and 3 Gallon Spot Extractors – 10-0910-SP\u003c\/h2\u003e\u003cp\u003eThe Sandia 10-0910-SP is the factory-compatible inline heater for Sandia 2-gallon and 3-gallon spot extractors. Available in either 600-watt or 875-watt configurations — same part number, same price — it heats the cleaning solution before it reaches the hand tool, driving solution temperature up to 200°F for deeper soil dislodging and faster sanitization of upholstery and carpet fibers. Specify your required wattage at checkout.\u003c\/p\u003e\u003ch3\u003e10-0910-SP Heater Performance and Design\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 or 875 watts\u003c\/strong\u003e — both configurations are available under this part number; confirm your preferred wattage when placing the order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeats solution to 200°F\u003c\/strong\u003e — elevated temperature accelerates soil breakdown in upholstery, carpet fibers, and embedded stains that cold-water extraction cannot fully remove.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel heater chassis\u003c\/strong\u003e — the heating element is mounted in a steel housing that withstands repeated thermal cycling without warping or cracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Sandia part\u003c\/strong\u003e — engineered to fit within the solution path of 2-gallon and 3-gallon extractor models, maintaining correct flow rate and pressure drop across the heater core.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with existing pumps\u003c\/strong\u003e — installs in the solution line between the pump and hand tool without modifying existing connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere Heated Extraction Adds Value\u003c\/h3\u003e\u003cp\u003eRestoration contractors converting a standard Sandia spotter to heated extraction use the 10-0910-SP to handle protein-based stains, body fluid cleanup, and sanitization tasks on water damage jobs. Hotel housekeeping departments add the heater to increase spa and restaurant upholstery cleaning results without replacing the machine. Carpet cleaning professionals use heated spotters for grease-based stains in commercial kitchens and food service areas where cold-water spot treatment fails.\u003c\/p\u003e\u003ch3\u003eCompatibility and Ordering Notes\u003c\/h3\u003e\u003cp\u003eFits Sandia spot extractor models 50-2000 (2-gallon) and 50-1000, 50-4000 (3-gallon). Note: confirm whether you are using a 2-gallon or 3-gallon extractor, and specify 600 watts or 875 watts when ordering — Sandia produces both under the 10-0910-SP part number. Ships as one inline heater assembly.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e10-0910-SP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage Options\u003c\/th\u003e\n\u003ctd\u003e600W or 875W (same part, specify at order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Solution Temperature\u003c\/th\u003e\n\u003ctd\u003e200°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater Chassis\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003eSandia 50-2000, 50-1000, 50-4000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSandia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076325626013,"sku":"10-0910-SP","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/download_31.webp?v=1729330564"},{"product_id":"sandia-3-gallon-100psi-super-spot-extractor-with-heat-kit-50-4100-ss","title":"Sandia 50-4100-SS Super Spot Extractor 3 Gal – 100 PSI, 200°F, 98.8\" Lift","description":"\u003ch2\u003e3-Gallon Super Spot Extractor with Heat and 100 PSI Pump – Sandia 50-4100-SS\u003c\/h2\u003e\u003cp\u003eThe Sandia 50-4100-SS Super Spot Extractor combines a 100 PSI delivery pump with a 600-watt inline heater that raises solution temperature to 200°F, driving heated extraction into upholstery, carpet, and fabric surfaces. The 2-stage 804-watt motor produces 100 CFM airflow and 98.8 inches of water lift — 30% more lift than the standard Sniper spotter — for faster soil and moisture recovery after treatment.\u003c\/p\u003e\u003ch3\u003e50-4100-SS Performance and Mechanical Design\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 PSI pump\u003c\/strong\u003e — delivers solution at higher pressure than standard spotters, forcing cleaning agents deeper into fibers and increasing dwell-time contact before extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-watt inline heater at 200°F\u003c\/strong\u003e — heats solution within the steel heater chassis before reaching the wand, accelerating breakdown of protein stains, grease, and embedded soil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e98.8 inches of water lift\u003c\/strong\u003e — the super 2-stage motor provides 30% greater vacuum than the standard 1-stage spotter, pulling extracted liquid more completely from padding and deep pile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoto-molded tank body\u003c\/strong\u003e — durable tank construction resists dents, chips, and cracks through repeated commercial use and transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble ball-bearing urethane wheels\u003c\/strong\u003e — the slide-out carry handle and urethane wheels allow easy transport on hard floors and carpet without scratching.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProfessional Cleaning Environments for the 50-4100-SS\u003c\/h3\u003e\u003cp\u003eRestoration contractors use this extractor for spot treatment of upholstery and carpet in water damage and mold remediation projects, where heated extraction sanitizes as it removes soil. Auto detailing shops use it for vehicle upholstery, headliners, and cargo liners where 200°F extraction dissolves embedded grease from high-use vehicles. Hotels rely on it for rapid-turnaround guest room upholstery spot cleaning between checkouts. Commercial carpet cleaning services use it as a portable solution for stairways, furniture, and areas inaccessible to truck-mount hoses.\u003c\/p\u003e\u003ch3\u003eWarranty, Certifications, and Box Contents\u003c\/h3\u003e\u003cp\u003eWarranty: lifetime on the body, 2 years on motor and pump, 1 year on all other parts. Ships complete with the extractor unit, steel heater chassis assembly, wand, and hoses. Stainless steel hand tools are recommended when operating with heated solution at 200°F.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e50-4100-SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank Capacity\u003c\/th\u003e\n\u003ctd\u003e3 gallons (solution and recovery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump Pressure\u003c\/th\u003e\n\u003ctd\u003e100 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater Wattage\u003c\/th\u003e\n\u003ctd\u003e600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Solution Temp\u003c\/th\u003e\n\u003ctd\u003e200°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e2-stage, 804 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirflow\u003c\/th\u003e\n\u003ctd\u003e100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater Lift\u003c\/th\u003e\n\u003ctd\u003e98.8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty (Body)\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty (Motor\/Pump)\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSandia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076325920925,"sku":"50-4100-SS","price":1569.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/download_28.webp?v=1754754712"},{"product_id":"sandia-50-2001-spotter-2-gallon-55-psi-2-stage-spot-extractor-w-7-ft-vacuum-and-solution-hoses-4-stainless-steel-upholstery-tool","title":"Sandia 50-2001 Spotter 2-Gallon Spot Extractor – 55 PSI, 2-Stage","description":"\u003ch2\u003eSandia 50-2001 Spotter — 55 PSI Portable Spot Extractor for Upholstery and Carpet Spot Treatment\u003c\/h2\u003e\n\n\u003cp\u003eThe Sandia Spotter 50-2001 is a 2-gallon portable spot extractor built for rapid-response stain treatment in hotels, healthcare facilities, offices, and restaurants. At 55 PSI and a 2-stage vacuum motor, it delivers enough pressure to flush deep stains out of upholstery fibers while recovering solution fast enough to keep fabric dry times short. At roughly 20 lbs, it moves room to room without a cart — practical for housekeeping teams covering multiple floors.\u003c\/p\u003e\n\n\u003ch3\u003e50-2001 Pump Pressure, Motor, and Tank Configuration\u003c\/h3\u003e\n\n\u003cp\u003eAt 55 PSI, the 50-2001 delivers meaningful spray force for spot treatment — more than enough to flush soil from upholstered seating, but measured enough to avoid over-wetting delicate fabrics. The 2-stage motor provides strong suction recovery, which is what keeps carpets and upholstery from staying wet for hours after treatment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e55 PSI pump\u003c\/strong\u003e — sufficient pressure to dislodge embedded soil from upholstered seating and low-pile commercial carpet without saturating the backing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-stage vacuum motor\u003c\/strong\u003e — stronger suction recovery than single-stage designs; shorter dry times on upholstery and carpet after treatment\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeparate 2-gallon solution and recovery tanks\u003c\/strong\u003e — dedicated tanks prevent recovered soil from contaminating fresh cleaning solution; minimizes refill frequency for typical spot jobs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoto-molded polyethylene housing\u003c\/strong\u003e — resists cracking and warping from repeated drops; appropriate for daily hotel housekeeping use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide-out handle and wheels\u003c\/strong\u003e — moves between floors and rooms without lifting; practical for any multi-floor commercial building\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e25 ft power cord\u003c\/strong\u003e — covers a standard hotel room from a single outlet without extension cords\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e50-2001 Applications and Environments\u003c\/h3\u003e\n\n\u003cp\u003eHotels and motels use the 50-2001 as the go-to housekeeping tool for rapid stain response on guest room upholstery, carpet, and hallway runners between scheduled deep cleans. Healthcare facilities with fabric patient seating use it for targeted extraction when spot cleaning with spray-and-blot falls short. Office building janitorial teams handle beverage spills on carpet tiles and lounge seating with this machine — the compact footprint fits in standard janitorial closets. Restaurant operators and catering venues use it for upholstered booth seating and dining room carpet maintenance.\u003c\/p\u003e\n\n\u003ch3\u003e50-2001 PSI, Water Lift, and What's Included\u003c\/h3\u003e\n\n\u003cp\u003eShips complete and ready to use: 7-foot vacuum hose, 7-foot solution hose, and 4\" stainless steel upholstery tool included. The stainless tool is rated for heated output if your facility upgrades to a heated unit later. At 55 PSI, this machine is appropriate for upholstery and spot carpet treatment — not for full-room carpet extraction, which requires higher PSI and larger tank capacity.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50-2001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\" x 10\" x 19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoto-molded polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 ft vacuum hose, 7 ft solution hose, 4\" stainless upholstery tool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cbr\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/2024-M0358EN_TBL-2228_100T-Product-Spec-Sheet.pdf?v=1746031476\"\u003e\u003cstrong\u003e50-2001 Spec Sheet\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/TBL-2228-Owner-Manual.pdf?v=1746031479\"\u003e\u003cstrong\u003e50-2001 Owner Manual\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/p\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076332507293,"sku":"50-2001","price":809.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/aHR0cHM6Ly93d3cuYnV5amFuaXRvcmlhbGRpcmVjdC5jb20vSW1hZ2VzL1NhbmRpYS9TYW41MC0yMDAxLnBuZw2_1.webp?v=1764530657"},{"product_id":"bissell-little-green-pro-deep-cleaning-machine","title":"Bissell BGSS1481 Little Green Pro Spot Extractor – 5.7A, 3\/4 Gal, 20 ft Cord","description":"\u003ch2\u003eBGSS1481 Little Green Pro Spot Extractor — Portable Carpet and Upholstery Cleaning\u003c\/h2\u003e\n\u003cp\u003eThe Bissell BGSS1481 Little Green Pro combines suction, brushing action, and solution spray in one compact unit to pull embedded stains from carpet, upholstery, and auto interiors. A 5.7-amp motor drives full extraction rather than surface pickup, and the 3\/4-gallon tank with a 20-foot cord runs longer between refills and outlet changes than many competing portable extractors. Where a walk-behind extractor is impractical, such as vehicles, stairs, and cubicles, the BGSS1481 handles complete extraction at portable scale rather than surface treatment, applying solution, agitating the fiber, and pulling the dirty water back out in the same pass that truck-mount systems use at larger scale.\u003c\/p\u003e\n\u003ch3\u003eBGSS1481 Extraction Power and Included Tools\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.7-amp motor\u003c\/strong\u003e — commercial-grade suction for full extraction, not just surface-level pickup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-gallon tank\u003c\/strong\u003e — extends cleaning runs without constant refilling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-foot power cord\u003c\/strong\u003e — reaches stairs, vehicles, and adjacent rooms from one outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-inch stair tool\u003c\/strong\u003e — purpose-built for step risers and tight edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushing action with solution spray\u003c\/strong\u003e — agitates fibers and applies cleaner directly to the stain zone before extraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced carry handle\u003c\/strong\u003e — one-handed transport between rooms and floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBGSS1481 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eAuto detailers use the BGSS1481 on seats, floor mats, and trunk liners where full-size extractors cannot reach. Hotel housekeeping teams deploy it for spot cleaning between full room turnovers, handling a coffee spill on upholstery or a stain on a stair runner in minutes. Office cleaning crews keep one per floor for spill response on cubicle chairs and entry mats, and the 20-foot cord covers most single-room jobs without relocating. Restoration and janitorial teams add it to a cart for fast follow-up on stains that do not justify a full extractor, and the balanced carry handle makes it easy to move up and down stairs between rooms.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0746\/9445\/9705\/files\/BGSS1481-Schematic.pdf?v=1705569403\"\u003eBGSS1481 Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0746\/9445\/9705\/files\/BGSS1481-User-Guide.pdf?v=1705569402\"\u003eBGSS1481 Owner's Manual (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0746\/9445\/9705\/files\/BGSS1481SpecSheet.pdf?v=1705569402\"\u003eBGSS1481 Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bissell Big Green Commercial","offers":[{"title":"Default Title","offer_id":46076375171229,"sku":"BGSS1481","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/BGSS1481-600x600.webp?v=1754754733"},{"product_id":"sandia®-3-gallon-spot-extractor-with-heat-kit","title":"Sandia 50-4000 Spot Extractor with Heat – 3 Gal, 55 PSI, 200°F, 804W","description":"\u003ch2\u003eSandia 50-4000 3-Gallon Spot Extractor with Heat Kit – 200°F In-Line Heater\u003c\/h2\u003e\n\u003cp\u003eThe 50-4000 pairs a 600-watt in-line heater that brings solution to 200°F with an 804-watt Ametek 2-stage vacuum motor delivering 100 CFM and 76 inches of water lift. At 42 pounds with 3-gallon solution and recovery tanks, it is portable enough for hotel spot cleaning, auto detailing, and office furniture maintenance. The kit includes 15-foot hoses and a 4-inch stainless steel upholstery tool for immediate deployment on upholstery, car seats, and carpet stains.\u003c\/p\u003e\n\n\u003ch3\u003e50-4000 Spot Extractor Specs and Heat System\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-line heater:\u003c\/strong\u003e 600 watts — heats solution to 200°F for superior stain breakdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum motor:\u003c\/strong\u003e 804 watts, 2-stage Ametek — 100 CFM airflow, 76 inches water lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump pressure:\u003c\/strong\u003e 55 PSI standard (100 PSI available) — consistent solution delivery to upholstery tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution tank:\u003c\/strong\u003e 3 gallons — compact capacity for spot work and mobile cleaning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery tank:\u003c\/strong\u003e 3 gallons — matched capacity for balanced operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 15-foot vacuum and solution hoses, 4-inch stainless steel upholstery tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 1 × 20 ft, 16\/3-gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e roto-molded polyethylene — impact-resistant for daily transport\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e urethane wheels and slide-out carry handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 25\"L × 11\"W × 29\"H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 42 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime (body), 2 years (motor and pump), 1 year (electrical), 90 days (tools\/accessories)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere 200°F Solution Temperature Changes Spot Cleaning Results\u003c\/h3\u003e\n\u003cp\u003eSet stains — coffee, food, pet accidents, grease — involve compounds that bond to carpet fiber at the molecular level. Cold water solution lifts surface soil but leaves bonded compounds in the fiber. Solution at 200°F disrupts those bonds by increasing molecular activity, allowing the extraction process to pull the stain compound out of the fiber rather than just diluting the surface. In hotel housekeeping where room turnover requires spot cleaning to clear before the next guest arrives, the heat differential directly affects whether a stain clears in one pass or requires multiple treatments. The 50-4000's 600-watt heater delivers consistent 200°F temperature from the first pass.\u003c\/p\u003e\n\n\u003ch3\u003eSpot Extractor Included Kit and PSI Selection\u003c\/h3\u003e\n\u003cp\u003eThe 50-4000 ships with 15-foot vacuum and solution hoses and a 4-inch stainless steel upholstery tool — ready to run immediately on upholstery, auto seats, and carpet spots. The standard 55 PSI pump provides appropriate solution pressure for upholstery tools where higher pressure can saturate and damage fabric backing. The optional 100 PSI configuration is available for operators working primarily on dense carpet fiber that benefits from higher solution velocity. At 42 pounds with the urethane wheels and slide-out handle, the unit transports between hotel floors, auto detailing bays, and commercial offices in a single trip.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50-4000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn-line heater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 watts (200°F max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e804 watts, 2-stage Ametek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWater lift\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e76 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI (100 PSI available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft, 16\/3-gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25\"L × 11\"W × 29\"H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46076414656669,"sku":"50-4000","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/3-Gallon-Spot-Extractor-with-Heat_1.webp?v=1764530736"},{"product_id":"sandia-3-gallon-50-3000-50-3001-super-spotter-series-spot-extractor-kit","title":"Sandia 50-3000\/50-3001 Super Spotter 3-Gal Spot Extractor – 55 PSI, 804W","description":"\u003ch2\u003eSandia 50-3000 \/ 50-3001 Super Spotter 3-Gallon Spot Extractor – 55 PSI, 804W\u003c\/h2\u003e\n\u003cp\u003eThe Super Spotter series covers urgent spot cleaning — localized stains on carpet, upholstery, or auto interiors where a full-size extractor would be unnecessary. Both the 50-3000 and 50-3001 share the same motor, pump, tanks, and dimensions; the only difference is the upholstery tool: the 50-3000 includes a 4\" clear view tool for monitoring solution placement, and the 50-3001 includes a 4\" stainless steel tool for heavier-duty use. Both are made in the USA.\u003c\/p\u003e\n\u003ch3\u003e50-3000 \/ 50-3001 Specifications and Mechanics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2-stage Ametek, 804W — the same Ametek motor platform used in Sandia's 50-1006 (which uses 15 ft hoses vs this unit's 7 ft hoses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater lift:\u003c\/strong\u003e 98.8\" — strong for a 3-gallon portable unit; extracts solution from upholstery and carpet efficiently without leaving excessive moisture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 100 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e 55 PSI — lower than the 100 PSI pump in the heated 50-4100; adequate for spot cleaning without over-saturating delicate fabrics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTanks:\u003c\/strong\u003e 3-gallon solution and 3-gallon recovery — balanced capacity for spot jobs without added bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoses:\u003c\/strong\u003e 7 ft vacuum hose + 7 ft solution hose — the 50-1006 extends this to 15 ft for greater reach\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 20 ft, NEMA 5-15P plug, 115V\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21\"×10\"×19\"; weight: 19 lbs (50-3000) \/ 15 lbs (50-3001 with lighter stainless tool)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e roto-molded polyethylene, slide-out handle, double ball-bearing urethane wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstery tool:\u003c\/strong\u003e 50-3000 — 4\" clear view (see solution contact point); 50-3001 — 4\" stainless steel (more durable for rough surfaces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere the Super Spotter Is Used\u003c\/h3\u003e\nThe 7 ft hoses suit environments where the machine can be positioned within arm's reach of the stain: hotel room spot calls, restaurant booth seating, vehicle interiors, and patient room upholstery in healthcare facilities. The slide-out handle and urethane wheels make it easy to carry to an elevator and position next to a chair or sofa without disrupting the surrounding area. The 20 ft power cord is shorter than Sandia's full-size extractor cords — plan to work near an outlet or use a heavy-duty extension cord rated for the motor's draw. For jobs requiring more reach, the 50-1006 extends hoses to 15 ft.\n\u003ch3\u003eChoosing Between the 50-3000 and 50-3001\u003c\/h3\u003e\nBoth models produce identical cleaning results. Select the 50-3000 (clear view tool) when you want to watch where the solution is making contact — useful for delicate upholstery fabrics where overspray is a concern. Select the 50-3001 (stainless steel tool) when durability and surface contact matter more than visibility — automotive upholstery, restaurant booth vinyl, and similar surfaces where the tool will experience repeated pressure.\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-3000-super-Spot-Extractor-Kit-with-4-inch-Clear-View-Upholstery-Tool-Specs-Sheet.pdf?v=1724251724\" target=\"_blank\"\u003eSpec Sheet – 50-3000 (Clear View Tool)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-3000-super-Spot-Extractor-Kit-with-4-inch-Clear-View-Upholstery-Tool-Owners-Manual.pdf?v=1724251723\" target=\"_blank\"\u003eOwner's Manual – 50-3000\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-3001-super-Spot-Extractor-Kit-with-4-inch-Stainless-Steel-Upholstery-Tool-Specs-Sheet.pdf?v=1724251724\" target=\"_blank\"\u003eSpec Sheet – 50-3001 (Stainless Steel Tool)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-3001-super-Spot-Extractor-Kit-with-4-inch-Stainless-Steel-Upholstery-Tool-Owners-Manual.pdf?v=1724251723\" target=\"_blank\"\u003eOwner's Manual – 50-3001\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50-3000\u003c\/td\u003e\n\u003ctd\u003e50-3001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage Ametek, 804W\u003c\/td\u003e\n\u003ctd\u003e2-stage Ametek, 804W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 CFM\u003c\/td\u003e\n\u003ctd\u003e100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWater Lift\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e98.8\"\u003c\/td\u003e\n\u003ctd\u003e98.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHoses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 ft vacuum + 7 ft solution\u003c\/td\u003e\n\u003ctd\u003e7 ft vacuum + 7 ft solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft, NEMA 5-15P\u003c\/td\u003e\n\u003ctd\u003e20 ft, NEMA 5-15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V \/ 60Hz\u003c\/td\u003e\n\u003ctd\u003e115V \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUpholstery Tool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\" clear view\u003c\/td\u003e\n\u003ctd\u003e4\" stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19 lbs\u003c\/td\u003e\n\u003ctd\u003e15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\" × 10\" × 19\"\u003c\/td\u003e\n\u003ctd\u003e21\" × 10\" × 19\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoto-molded polyethylene\u003c\/td\u003e\n\u003ctd\u003eRoto-molded polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade In\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Clear View Upholstery Tool","offer_id":46313497395357,"sku":"50-3000","price":1009.0,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel Upholstery Tool","offer_id":46313497428125,"sku":"50-3001","price":1069.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/product-38693878628509.webp?v=1774438456"},{"product_id":"sandia-50-1006-3-gallon-spot-extractor-kit-with-15-ft-hoses-and-stainless-steel-upholstery-tool","title":"Sandia 50-1006 3-Gal Spot Extractor – 55 PSI, 97 CFM, 15 Ft Hoses","description":"\u003ch2\u003eSandia 50-1006 3-Gallon Spot Extractor – 55 PSI, 15 Ft Hoses, Stainless Steel Tool\u003c\/h2\u003e\n\u003cp\u003eThe 50-1006 extends the reach of Sandia's spot extractor line to 15 ft — double the 7 ft hoses on the Super Spotter (50-3000\/50-3001) — without increasing the 3-gallon tank size. The same 2-stage Ametek 804W motor and 55 PSI pump drive both units; the 50-1006 is the longer-reach version for situations where the machine cannot be positioned directly beside the stain. It includes a 4\" stainless steel upholstery tool and weighs 29 lbs — 10–14 lbs heavier than the Super Spotter models.\u003c\/p\u003e\n\u003ch3\u003e50-1006 Specifications and Reach Comparison\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2-stage Ametek, 804W, 115V — produces 97 CFM and sufficient static lift for carpet and upholstery extraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e 55 PSI — same as the Super Spotter series; lower than the 100 PSI heated 50-4100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoses:\u003c\/strong\u003e 15 ft vacuum hose (1.25\" diameter) + 15 ft solution hose — reaches across a full hotel room from the doorway, or covers an office cubicle without repositioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 3-gallon solution and 3-gallon recovery — matched; neither tank outpaces the other under normal spot-cleaning loads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpholstery tool:\u003c\/strong\u003e 4\" stainless steel — durable for repeated use on automotive interiors, restaurant seating, and upholstered chairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 25 ft — 5 ft longer than the Super Spotter's 20 ft cord; combined with 15 ft hoses gives approximately 40 ft of total working radius from a single outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 20\"×10\"×16\"; weight: 29 lbs — heavier than the 15–19 lb Super Spotter models but still one-person portable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e roto-molded polyethylene, made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere the Extended Hose Length Changes the Job\u003c\/h3\u003e\nThe 15 ft hoses solve the positioning problem: in a standard hotel room, the extractor can stay in the hallway while the operator cleans the carpet, upholstery, and any spots near the window — a single repositioning covers the entire room. In a restaurant, the machine sits in an aisle while the operator works under and around booth seating. For automotive detailing, the extractor stays outside the vehicle while the operator reaches across all seating surfaces. The 55 PSI pump is lower than the 100 PSI in the heated 50-4100, which is appropriate for delicate fabrics but less aggressive on heavily embedded carpet soil — for those jobs, the 50-4100 or a full-size extractor is the right choice.\n\u003ch3\u003e50-1006 vs 50-3000\/50-3001 Super Spotter\u003c\/h3\u003e\nBoth lines use the same Ametek 804W 2-stage motor and 55 PSI pump. The 50-1006's 15 ft hoses and 29 lb weight suit jobs where the machine needs to stay stationary in a doorway or aisle. The Super Spotter's 7 ft hoses and 15–19 lb weight suit jobs where you carry the machine into the space and work in tight proximity to the stain. Neither model heats solution — for heated spot extraction, the 50-4100 with its 600W in-line heater at 100 PSI is the upgrade path.\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-1006-super-Spot-Extractor-Kit-with-4-inch-Stainless-Steel-Upholstery-Tool-Specs-Sheet.pdf?v=1724466562\" target=\"_blank\"\u003eSpec Sheet – Sandia 50-1006\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/Sandia-3-Gallon-50-1006-super-Spot-Extractor-Kit-with-4-inch-Stainless-Steel-Upholstery-Tool-Owners-Manual.pdf?v=1724466562\" target=\"_blank\"\u003eOwner's Manual – Sandia 50-1006\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50-1006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage Ametek, 804W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e97 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHoses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 ft vacuum + 15 ft solution (1.25\" dia)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUpholstery Tool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\" stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20\" × 10\" × 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e29 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoto-molded polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade In\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46313498083485,"sku":"50-1006","price":909.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/product-38693880201373.webp?v=1774438464"},{"product_id":"sandia-50-4100-3-gallon-heated-spot-extractor-kit-with-100-psi-pump-and-4-stainless-steel-upholstery-tool","title":"Sandia 50-4100 Heated Spot Extractor – 100 PSI, 600W Heater, 3-Gallon","description":"\u003ch2\u003eSandia 50-4100 Heated 3-Gallon Spot Extractor – 100 PSI, 200°F, 15 Ft Hoses\u003c\/h2\u003e\n\u003cp\u003eThe 50-4100 is the heated version of Sandia's 3-gallon spot extractor line — the only model in the 50-series that combines a 100 PSI pump with a 600W in-line heater. The heater raises solution temperature to 200°F before it contacts the surface, which breaks down protein-based stains (food, blood, pet waste) more effectively than cold or warm water alone. Compared to the unheated 50-1006 (55 PSI, 29 lbs), the 50-4100 doubles the pump pressure and adds 13 lbs for the heater assembly.\u003c\/p\u003e\n\u003ch3\u003e50-4100 Specifications and Heater Mechanics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e 100 PSI Flojet — nearly double the 55 PSI in the 50-1006 and Super Spotter series; higher pressure injects solution deeper into carpet pile and denser upholstery fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater:\u003c\/strong\u003e 600W in-line unit raises solution to 200°F — the same target temperature as Sandia's full-size heated extractors (80-3300-H, 86-2100-H, etc.), achieved with lower wattage due to the smaller solution flow rate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum motor:\u003c\/strong\u003e 2-stage Ametek, 804W — produces 100 CFM airflow and 76\" water lift; the 76\" lift is lower than the Super Spotter's 98.8\" lift, which may reflect different Ametek motor configurations between the two units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoses:\u003c\/strong\u003e 15 ft vacuum and solution hoses — same length as the 50-1006; allows machine-in-doorway operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cord:\u003c\/strong\u003e 20 ft — 5 ft shorter than the 50-1006's 25 ft cord; total working radius from outlet is approximately 35 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 3 gal solution + 3 gal recovery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 42 lbs — 13 lbs heavier than the 50-1006 (29 lbs) due to the heater assembly; still one-person portable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 25\"×11\"×29\", body: roto-molded polyethylene, 115V\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool:\u003c\/strong\u003e 4\" stainless steel upholstery tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen Heated Extraction Justifies the Upgrade\u003c\/h3\u003e\nHeat changes the chemistry of spot cleaning, not just the temperature. Protein-based soils (blood, vomit, food) denature at elevated temperatures, breaking their bond with carpet and upholstery fibers more readily than with cold water. Oily soils from cooking grease or skin oils emulsify more quickly with hot solution. In medical facilities, senior living, and food service environments where these soil types are common, the 200°F solution temperature reduces the number of extraction passes needed to achieve visible results. The 100 PSI pump adds another advantage: it penetrates denser materials — Scotchgard-treated commercial carpet, vinyl-backed hospitality fabrics — where 55 PSI units deliver solution only to the surface.\n\u003ch3\u003e50-4100 vs 50-1006: Choosing Based on Soil Type\u003c\/h3\u003e\nFor general spot cleaning — spilled beverages, mud, tracked-in soil — the 50-1006 at 55 PSI without heat is sufficient and lighter. For protein-based or oily stains, sanitization requirements, or surfaces where chemical cleaning alone has not achieved results, the 50-4100's 100 PSI and 200°F heater combination addresses what the 50-1006 cannot. The weight difference (42 lbs vs 29 lbs) is meaningful only when the machine is carried frequently — for facilities that leave it on a cart or wheel it between rooms, the weight difference is negligible.\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/sandia-50-4100-3-gallon-heated-spot-extractor-kit-with-100-psi-pump-and-4-stainless-steel-upholstery-tool-Specs-Sheet.pdf?v=1724481714\" target=\"_blank\"\u003eSpec Sheet – Sandia 50-4100\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0696\/7174\/7813\/files\/sandia-50-4100-3-gallon-heated-spot-extractor-kit-with-100-psi-pump-and-4-stainless-steel-upholstery-tool-owners-manual.pdf?v=1724481715\" target=\"_blank\"\u003eOwner's Manual – Sandia 50-4100\u003c\/a\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50-4100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 PSI (Flojet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600W in-line, up to 200°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage Ametek, 804W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAirflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWater Lift\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHoses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 ft vacuum + 15 ft solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUpholstery Tool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\" stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25\" × 11\" × 29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRoto-molded polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":46313498345629,"sku":"50-4100","price":1509.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/product-38693880692893.webp?v=1774438449"},{"product_id":"nacecare-gve-370-george-carpet-extractor-10-hose-4-hand-tool","title":"NaceCare GVE 370 George Spot Extractor – 1200W, 30 PSI, 1.6-Gal, 19 lbs","description":"\u003ch2\u003eNaceCare GVE 370 George: Portable Spot Extractor for Upholstery and Auto Detailing\u003c\/h2\u003e\n\u003cp\u003eThe GVE 370 George is NaceCare's compact spot extractor — a 1200W vacuum motor producing 95 CFM and 100\" of water lift combined with a 30 PSI extraction pump, a 1.6-gallon polypropylene recovery tank, and a 10' hose with 4\" hand tool for precise upholstery and vehicle interior cleaning. At 19 lbs with a 42' power cord, it is portable enough for van-based auto detailing and light enough for a facility maintenance technician to carry to a specific stain without a cart. The ball-float wet shut-off protects the motor during extraction work.\u003c\/p\u003e\n\u003ch3\u003ePrecise Spot Extraction Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200W vacuum motor —\u003c\/strong\u003e produces 95 CFM and 100\" water lift for thorough moisture recovery from upholstery, carpet tiles, and vehicle seats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 PSI extraction pump —\u003c\/strong\u003e injects solution at controlled pressure through the 4\" hand tool for spot treatment without over-wetting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10' hose and 4\" hand tool —\u003c\/strong\u003e reach precise spots on seating, stairs, and vehicle interiors without repositioning the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.6-gallon polypropylene recovery tank —\u003c\/strong\u003e chemical-resistant construction for upholstery cleaning solution and detergent residue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19 lbs total weight —\u003c\/strong\u003e portable for single-operator van-based detailing or facility spot-cleaning rounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAuto Detailing, Upholstery Cleaning, and Facility Spotting\u003c\/h3\u003e\n\u003cp\u003eThe GVE 370 George is the machine that auto detailers, carpet cleaning contractors, and facility maintenance technicians use for work that requires precision rather than production speed — a coffee stain on a hotel chair, a pet stain on a residential area rug brought to a cleaning shop, or a fluid spill on a vehicle carpet that needs extraction before odor sets. The 30 PSI pump applies controlled solution without flood-wetting the substrate, and the 95 CFM motor pulls enough moisture back to prevent secondary damage. The 42' cord reaches from a utility outlet to a parking bay, and the 10' hose covers front and rear seats without moving the machine between positions.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVacuum Motor\u003c\/th\u003e\n\u003ctd\u003e1200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirflow\u003c\/th\u003e\n\u003ctd\u003e95 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater Lift\u003c\/th\u003e\n\u003ctd\u003e100\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump Pressure\u003c\/th\u003e\n\u003ctd\u003e30 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump Power\u003c\/th\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose Length\u003c\/th\u003e\n\u003ctd\u003e10'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning Width\u003c\/th\u003e\n\u003ctd\u003e4\" (hand tool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecovery Tank\u003c\/th\u003e\n\u003ctd\u003e1.6 US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank Construction\u003c\/th\u003e\n\u003ctd\u003ePolypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Cord\u003c\/th\u003e\n\u003ctd\u003e42'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/GVE-370-George-Spotting-Extractor-Product-Spec-Sheet.pdf?v=1747144328\"\u003eSpec Sheet\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/GVE-_Owner-Manual.pdf?v=1747144329\"\u003eOwner Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Nacecare","offers":[{"title":"Default Title","offer_id":46774908059805,"sku":"914813","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/899557-GVE-370_1.webp?v=1747144545"},{"product_id":"sandia-10-0501-stainless-steel-hand-tool","title":"Sandia 10-0501 Stainless Steel Hand Tool – 4\" Spot Extractor Attachment","description":"\u003ch2\u003eSandia 10-0501 Stainless Steel Hand Tool – 4\" Spot Extractor Attachment\u003c\/h2\u003e\n\u003cp\u003eThe Sandia 10-0501 is a 4-inch stainless steel hand tool designed for use with Sandia spot extractors that operate with heat. It provides precise extraction on upholstery, carpet spots, and tight areas where a full-size wand cannot reach, and is built from stainless steel to withstand the elevated temperatures produced by heated extraction machines.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial: stainless steel\u003c\/strong\u003e — required for use with heated extractors; resists deformation and corrosion at sustained high water temperatures that would damage plastic tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning width: 4\"\u003c\/strong\u003e — compact size for precision spot work on upholstery, stairs, auto interiors, and tight carpet areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with heated Sandia extractors\u003c\/strong\u003e — specifically designed for use with Sandia spot extractors that include a heat function; verify compatibility with your model before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement or spare tool\u003c\/strong\u003e — maintains cleaning capability when the original tool wears or is damaged during regular use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen Stainless Steel Is Required\u003c\/h3\u003e\n\u003cp\u003eSpot extractors with heat operate at water temperatures that plastic hand tools are not rated for — the heat causes warping, cracking, and seal failure in plastic tools during regular use. The 10-0501 stainless steel construction handles sustained hot water extraction without deformation. Upholstery cleaners, auto detailers, and carpet cleaning professionals use the 10-0501 for the detail work — fabric seats, stairs, footwells, and small carpet sections — that full-size wands address inefficiently. The 4-inch width allows precise placement on stain boundaries and seam lines where a wider tool would overlap onto clean areas.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-0501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCleaning Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSandia spot extractors with heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHand tool \/ detail wand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sandia","offers":[{"title":"Default Title","offer_id":47263801999517,"sku":"10-0501","price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/1933640_600x600_crop_center_1.webp?v=1764532565"},{"product_id":"u-s-products-cobra-mini-750h-heated-portable-spot-extractor-machine-only-05-10020-006","title":"US Products Cobra Mini 750H Heated Spot Extractor – 750W, 95 CFM, 85\" Lift, 05-10020-006","description":"\u003ch2\u003eCobra Mini 750H Heated Portable Spot Extractor — Machine Only, 05-10020-006\u003c\/h2\u003e\n\u003cp\u003eThe US Products Cobra Mini 750H is a purpose-built heated spot extractor weighing 32 lbs, with a 750W inline heater, 95 CFM airflow, 85\" water lift, and 55 PSI solution pump. At 21\" × 12\" × 31\", it fits in a standard cargo van without a ramp. The 05-10020-006 machine-only SKU ships without wand or hose for operators adding to an existing tool inventory.\u003c\/p\u003e\n\u003ch3\u003eCobra Mini 750H — Verified Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater:\u003c\/strong\u003e 750W inline — raises solution temperature for active soil emulsification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum motor:\u003c\/strong\u003e Single 2-stage, 95 CFM airflow, 85\" water lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution pump:\u003c\/strong\u003e 55 PSI — consistent spray pressure at the wand tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution tank:\u003c\/strong\u003e 2.2 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery tank:\u003c\/strong\u003e 2.5 gallons with float auto shut-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 32 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21\" L × 12\" W × 31\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10-year limited housing, 2-year major components, 90-day wear parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere the 750W Heater Makes a Measurable Difference\u003c\/h3\u003e\n\u003cp\u003eAuto detailing extraction is the primary use case for the 750H — vehicle interiors accumulate skin oils, food grease, and protein-based soils in seat fabric and carpet that cold water cannot fully emulsify. The 750W inline heater raises solution temperature at the wand tip, activating cleaning chemistry and releasing bonded soils that ambient-temperature extraction leaves behind. On upholstered furniture restoration, heated extraction accelerates dry times by delivering drier steam-temperature solution rather than room-temperature water.\u003c\/p\u003e\n\u003ch3\u003eFloat Shut-Off and Recovery Tank — Running the Machine Safely\u003c\/h3\u003e\n\u003cp\u003eThe 2.5-gallon recovery tank holds more water than the 2.2-gallon solution tank feeds per fill cycle, so a single fill of solution to the fill line will not overflow the recovery side under normal use. The float shut-off automatically cuts vacuum when the recovery tank reaches capacity, protecting the motor from running against a full tank. On sustained upholstery extraction jobs, plan to empty the recovery tank every 2–3 fill cycles depending on carpet moisture content.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/76TFgAj0pKw\"\u003e\u003c\/iframe\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCobra Mini 750H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e05-10020-006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750W Inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle 2-Stage Motor, 95 CFM, 85\" Water Lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Pump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 Gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 Gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\" L × 12\" W × 31\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-year limited housing, 2-year major components, 90-day wear parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"US Products","offers":[{"title":"Default Title","offer_id":47574115221661,"sku":"05-10020-006","price":937.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/5207323787.webp?v=1768845937"},{"product_id":"u-s-products-cobra-mini-750h-heated-portable-spot-extractor-with-trident-uph-4-upholstery-wand-amp-10-hose-05-10020-p5","title":"US Products Cobra Mini 750H Heated Spot Extractor – 4\" UPH Wand, 10' Hose, 05-10020-P5","description":"\u003ch2\u003eCobra Mini 750H Heated Spot Extractor with 4\" UPH Wand \u0026amp; 10' Hose — 05-10020-P5\u003c\/h2\u003e\n\u003cp\u003eThe 05-10020-P5 pairs the Cobra Mini 750H heated extractor with the Trident (UPH) 4\" Upholstery Wand and a 10' hose — the optimal combination for auto detailing, furniture restoration, and upholstery extraction where heated chemistry and a narrow wand profile are both required. The machine delivers 750W inline heat, 95 CFM airflow, 85\" water lift, and 55 PSI solution pressure at 32 lbs total weight.\u003c\/p\u003e\n\u003ch3\u003eWhat Ships in the 05-10020-P5 Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtractor:\u003c\/strong\u003e Cobra Mini 750H — 750W heater, 95 CFM, 85\" water lift, 55 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWand:\u003c\/strong\u003e Trident (UPH) 4\" Upholstery Wand — narrow profile for upholstery and auto interiors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose:\u003c\/strong\u003e 10' hose set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution tank:\u003c\/strong\u003e 2.2 gallons \/ Recovery tank: 2.5 gallons with float shut-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 32 lbs at 21\" × 12\" × 31\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10-year limited housing, 2-year major components, 90-day wear parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e4\" Upholstery Wand — Why Width Matters on Upholstered Surfaces\u003c\/h3\u003e\n\u003cp\u003eThe Trident (UPH) 4\" wand is narrow enough to follow the contours of seat cushions, headliners, door panels, and sofa cushions without catching on seams or stitching. At 4\" wide, it concentrates the 55 PSI solution spray and 85\" water lift suction into a focused cleaning path, maximizing extraction on each pass through tight foam and fiber layers. Auto detailers use this tool on velour, leather-backed fabric, and Alcantara surfaces where a wider floor wand would be impractical.\u003c\/p\u003e\n\u003ch3\u003eHeated Upholstery Extraction — Chemistry Activation in Confined Spaces\u003c\/h3\u003e\n\u003cp\u003eVehicle interiors accumulate skin oils, food residue, and protein soils that bond to fabric at a molecular level. The 750W inline heater raises solution temperature at the wand tip, activating enzyme and surfactant chemistry to break these bonds before the vacuum stroke recovers the emulsified soil. Cold-water extraction at the same PSI and lift level leaves more residue behind in fabric, which resurfaces as a stain as the fibers dry. The 10' hose length is sized for vehicle interiors — sufficient reach from the machine positioned outside the door to the full interior without excess slack.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/76TFgAj0pKw\"\u003e\u003c\/iframe\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCobra Mini 750H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e05-10020-P5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750W Inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle 2-Stage Motor, 95 CFM, 85\" Water Lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Pump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 Gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 Gallons with Float Shut-Off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Wand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrident (UPH) 4\" Upholstery Wand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded Hose\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10' Hose Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\" L × 12\" W × 31\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-year limited housing, 2-year major components, 90-day wear parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"US Products","offers":[{"title":"Default Title","offer_id":47578404978845,"sku":"05-10020-P5","price":1277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/5207323787.webp?v=1768845937"},{"product_id":"u-s-products-cobra-mini-750c-portable-spot-extractor-machine-only-05-10020-005","title":"US Products Cobra Mini 750C Cold Water Spot Extractor – 95 CFM, 85\" Lift, 05-10020-005","description":"\u003ch2\u003eCobra Mini 750C Cold Water Portable Spot Extractor — Machine Only, 05-10020-005\u003c\/h2\u003e\n\u003cp\u003eThe US Products Cobra Mini 750C is the cold-water version of the Cobra Mini line — the same 2-stage vacuum motor (95 CFM, 85\" water lift), 55 PSI solution pump, 2.2-gallon solution tank, and 2.5-gallon recovery tank as the 750H, minus the 750W inline heater. At 30–32 lbs and 21\" × 12\" × 31\", it fits in a van cargo area and operates on a standard 120V outlet. The 05-10020-005 is machine only.\u003c\/p\u003e\n\u003ch3\u003eCobra Mini 750C — Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater:\u003c\/strong\u003e None — cold water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum motor:\u003c\/strong\u003e Single 2-stage, 95 CFM, 85\" water lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution pump:\u003c\/strong\u003e 55 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolution tank:\u003c\/strong\u003e 2.2 gallons \/ Recovery: 2.5 gallons with float shut-off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30–32 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 21\" L × 12\" W × 31\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 10-year limited housing, 2-year major components, 90-day wear parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCold Water vs. Heated — When the 750C Is the Right Choice\u003c\/h3\u003e\n\u003cp\u003eThe 750C is appropriate when the soils being cleaned are primarily water-soluble particulate, light traffic grime, or stains responsive to pre-spray enzyme treatment — not grease or protein soils that require heat to emulsify. For janitorial spot cleaning, routine upholstery maintenance, and water-based stain removal, the 750C delivers identical vacuum performance to the 750H without the added heater cost and circuit draw. Operators who use pre-spray chemistry with enzyme or oxidizing agents allow the chemistry to do the soil-release work that heat provides on the 750H.\u003c\/p\u003e\n\u003ch3\u003eMachine-Only SKU — Wand and Hose Options\u003c\/h3\u003e\n\u003cp\u003eThe 05-10020-005 ships without wand or hose. The 4\" Trident (UPH) Upholstery Wand (available in the P6 package) is the recommended tool for upholstery and auto detailing. Standard floor wands with 1.5\" connections are also compatible for spot carpet extraction. The 10' hose length in the P6 package fits most vehicle interior reach requirements.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCobra Mini 750C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e05-10020-005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — Cold Water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle 2-Stage Motor, 95 CFM, 85\" Water Lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Pump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 Gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 Gallons with Float Shut-Off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30–32 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21\" L × 12\" W × 31\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAccessories\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMachine Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-year limited housing, 2-year major components, 90-day wear parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"US Products","offers":[{"title":"Default Title","offer_id":47578410483869,"sku":"05-10020-005","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/5207335272.webp?v=1768846809"},{"product_id":"mi-t-m-fcx-02c0m","title":"Mi-T-M FCX-02C0M ChoreMaster Spot Extractor – 2 Gal, 55 PSI, 100 CFM, 115V","description":"\u003ch2\u003eFCX-02C0M ChoreMaster Spot Extractor for Carpet and Upholstery\u003c\/h2\u003e\n\u003cp\u003eThe Mi-T-M FCX-02C0M is a 2-gallon portable extractor for spot cleaning carpet, upholstery, and vehicle interiors. At 17 pounds it carries up a stairwell or into a vehicle by hand, and the 55 PSI pump with a 100 CFM two-stage vacuum sprays and recovers in one pass so treated areas dry sooner.\u003c\/p\u003e\n\u003ch3\u003eFCX-02C0M Cleaning Performance\u003c\/h3\u003e\n\u003cp\u003eA 2-stage 804-watt vacuum motor and a 55 PSI pump feed the 7-ft hose and 4-inch clear-view tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2-gallon solution and recovery tanks\u003c\/strong\u003e — handle spot and small-area work between refills\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e55 PSI pump\u003c\/strong\u003e — drives solution into carpet pile and upholstery to lift set-in soil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100 CFM two-stage vacuum\u003c\/strong\u003e — pulls more moisture out so carpet is ready to walk on sooner\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4-inch clear-view tool\u003c\/strong\u003e — shows the recovery stream so an operator sees when an area runs clean\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e17 lb portable body\u003c\/strong\u003e — moves between rooms, vehicles, and stairs without a cart\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-ft cord, 7-ft hose\u003c\/strong\u003e — covers a room or vehicle interior from one outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFCX-02C0M Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eAuto detailers, janitorial services, and property managers use the FCX-02C0M for spot and upholstery work in vehicles, offices, hotel rooms, and restaurants. The compact tanks suit touch-ups and daily maintenance rather than whole-floor jobs. It runs on 115V power and ships with a 7-ft hose and 4-inch tool; the pump and motor carry a two-year warranty, electrical one year, and the housing is warranted for life.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Gallon Cold-Water Spot Extractor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage, 804 W, 100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHose\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 in clear-view\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e17 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22 in L x 9 in W x 18 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-yr electrical, 2-yr motor, 2-yr pump, lifetime housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-02C0M-spec.pdf?v=1783018086\"\u003eMi-T-M FCX-02C0M Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MITM-Carpet-Extractor-Manual.pdf?v=1783018096\"\u003eMi-T-M FCX-02C0M Carpet Extractor Owner's Manual (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Mi-T-M","offers":[{"title":"Default Title","offer_id":48565460566173,"sku":"FCX-02C0M","price":913.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-02C0M.png?v=1783018512"},{"product_id":"mi-t-m-fcx-03c0m","title":"Mi-T-M FCX-03C0M ChoreMaster Spot Extractor – 3 Gal, 55 PSI, 100 CFM, 115V","description":"\u003ch2\u003eFCX-03C0M ChoreMaster 3-Gallon Spot Extractor\u003c\/h2\u003e\n\u003cp\u003eThe Mi-T-M FCX-03C0M adds a gallon of solution and recovery capacity over the 2-gallon model, so a crew works longer between refills on carpet and upholstery. A slide-out handle and wheels move it between rooms, and the 55 PSI pump with a 100 CFM two-stage vacuum sprays and recovers in one pass.\u003c\/p\u003e\n\u003ch3\u003eFCX-03C0M Cleaning Performance\u003c\/h3\u003e\n\u003cp\u003eA 2-stage 804-watt vacuum motor and a 55 PSI pump feed the 7-ft hose and 4-inch tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-gallon solution and recovery tanks\u003c\/strong\u003e — clean more area before stopping to dump and refill\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e55 PSI pump\u003c\/strong\u003e — pushes solution into pile to release ground-in soil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100 CFM two-stage vacuum\u003c\/strong\u003e — recovers more moisture so carpet dries faster\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide-out handle and wheels\u003c\/strong\u003e — roll the unit room to room instead of carrying it\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4-inch clear-view tool\u003c\/strong\u003e — watch the recovery stream to know when an area is clean\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e20-ft cord, 7-ft hose\u003c\/strong\u003e — work across a room from one outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFCX-03C0M Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eJanitorial crews, hotels, schools, and property managers use the FCX-03C0M for daily carpet and upholstery maintenance and mid-size spot work. The wheeled body suits routes that cover several rooms per shift. It runs on 115V and ships with a 7-ft hose and 4-inch tool; the pump and motor carry a two-year warranty, electrical one year, and the housing for life.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3-Gallon Cold-Water Spot Extractor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage, 804 W, 100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHose\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 in clear-view\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMobility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSlide-out handle + wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 in L x 9.75 in W x 20 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-yr electrical, 2-yr motor, 2-yr pump, lifetime housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-03C0M-spec.pdf?v=1783018088\"\u003eMi-T-M FCX-03C0M Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MITM-Carpet-Extractor-Manual.pdf?v=1783018096\"\u003eMi-T-M FCX-03C0M Carpet Extractor Owner's Manual (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Mi-T-M","offers":[{"title":"Default Title","offer_id":48565460762781,"sku":"FCX-03C0M","price":1023.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-03C0M.webp?v=1783018386"},{"product_id":"mi-t-m-fcx-03h0m","title":"Mi-T-M FCX-03H0M ChoreMaster Heated Spot Extractor – 3 Gal, 182°F, 55 PSI","description":"\u003ch2\u003eFCX-03H0M Heated ChoreMaster Spot Extractor\u003c\/h2\u003e\n\u003cp\u003eThe Mi-T-M FCX-03H0M adds a 600-watt in-line heater to the 3-gallon spot extractor, warming solution to 182°F. Hot water releases grease, protein, and set-in stains that cold water leaves behind, which suits food-service, healthcare, and restoration work. A 15-ft hose reaches farther from the cart than the cold-water models.\u003c\/p\u003e\n\u003ch3\u003eFCX-03H0M Heat and Cleaning Performance\u003c\/h3\u003e\n\u003cp\u003eA 600-watt in-line heater brings solution to 182°F while a 55 PSI pump and a 100 CFM two-stage vacuum spray and recover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIn-line heater to 182°F\u003c\/strong\u003e — breaks down grease and protein soils that cold water leaves in the fiber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-gallon solution and recovery tanks\u003c\/strong\u003e — work through mid-size heated jobs between refills\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e55 PSI pump\u003c\/strong\u003e — drives hot solution into carpet and upholstery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100 CFM two-stage vacuum\u003c\/strong\u003e — recovers moisture so treated areas dry sooner\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e15-ft hose and 4-inch tool\u003c\/strong\u003e — reach stairs, booths, and vehicle interiors from one spot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e31 lb portable body\u003c\/strong\u003e — move it between rooms and up stairs without a cart\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFCX-03H0M Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eRestoration contractors, restaurants, and healthcare facilities use the FCX-03H0M where heat matters — grease near kitchens, protein stains, and sanitizing carpet and upholstery. The heater runs on 115V, so no special circuit is needed. It ships with a 15-ft hose and 4-inch clear-view tool; the pump and motor carry a two-year warranty, electrical one year, and the housing for life.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3-Gallon Heated Spot Extractor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-stage, 804 W, 100 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, to 182°F (600 W in-line heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecovery Tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 gal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e115V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHose\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 in clear-view\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e44 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 in L x 10.5 in W x 24.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-yr electrical, 2-yr motor, 2-yr pump, lifetime housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-03H0M-spec.pdf?v=1783018090\"\u003eMi-T-M FCX-03H0M Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MITM-Carpet-Extractor-Manual.pdf?v=1783018096\"\u003eMi-T-M FCX-03H0M Carpet Extractor Owner's Manual (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Mi-T-M","offers":[{"title":"Default Title","offer_id":48565461221533,"sku":"FCX-03H0M","price":1633.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/FCX-03H0M.webp?v=1783018356"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/collections\/TP4X-Gallery-V1-1024x845.webp?v=1781792648","url":"https:\/\/uscleaningtools.com\/collections\/portable-carpet-extractors.oembed","provider":"US Cleaning Tools","version":"1.0","type":"link"}