{"title":"1000 CFM Desiccant Dehumidifiers","description":"\u003ch2\u003eIndustrial 1000 CFM Desiccant Dehumidifiers for Large-Scale Moisture Control\u003c\/h2\u003e\n\u003cp\u003e\nControl humidity in the most challenging environments with high-capacity 1000 CFM desiccant dehumidifiers engineered for commercial and industrial applications. These powerful systems remove moisture effectively even in cold temperatures and low humidity conditions where refrigerant dehumidifiers fail.\n\u003c\/p\u003e\n\u003ch3\u003eSuperior Low-Temperature Performance\u003c\/h3\u003e\n\u003cp\u003e\nUnlike refrigerant-based systems that lose effectiveness below 65°F, desiccant dehumidifiers maintain peak moisture removal performance in freezing temperatures and unheated spaces. The desiccant rotor continuously absorbs moisture from incoming air and regenerates using heat, providing consistent dehumidification regardless of ambient temperature. This capability makes these units ideal for winter construction sites, cold storage facilities, ice rinks, and unheated warehouses where traditional dehumidifiers cannot operate. The 1000 CFM airflow capacity handles large spaces and high moisture loads that would overwhelm smaller units.\n\u003c\/p\u003e\n\u003ch3\u003eIndustrial Applications and Features\u003c\/h3\u003e\n\u003cp\u003e\nThese commercial-grade systems excel in demanding industrial environments including manufacturing facilities, warehouses, storage facilities, and large-scale restoration projects. The high airflow capacity enables effective moisture control in spaces up to 50,000 cubic feet, and ducting options allow focusing dehumidification in specific areas or distributing across multiple zones. Continuous drain connections enable unattended operation during extended projects, and rugged construction withstands industrial environments including dust, chemicals, and rough handling. Built-in hour meters and controls allow precise operation monitoring and documentation for restoration and construction projects.\n\u003c\/p\u003e\n\u003cp\u003e\n\u003cstrong\u003eRelated Collections:\u003c\/strong\u003e\n- \u003ca href=\"\/collections\/desiccant-dehumidifiers\"\u003eDesiccant Dehumidifiers\u003c\/a\u003e\n- \u003ca href=\"\/collections\/commercial-dehumidifiers\"\u003eCommercial Dehumidifiers\u003c\/a\u003e\n- \u003ca href=\"\/collections\/dehumidifiers-for-industrial-facilities\"\u003eIndustrial Dehumidifiers\u003c\/a\u003e\n\u003c\/p\u003e\n\u003ch3\u003eEnergy Efficiency and Control\u003c\/h3\u003e\n\u003cp\u003e\nModern desiccant technology maximizes moisture removal while minimizing energy consumption, and programmable humidistats maintain target humidity levels automatically without constant operator adjustment. Variable-speed fans optimize airflow for different applications and reduce energy costs during lower-demand periods, and automatic defrost prevents ice buildup that reduces efficiency. The sealed desiccant rotor resists contamination and maintains performance across thousands of operating hours, and service-friendly designs enable quick filter changes and routine maintenance without specialized tools. Commercial-duty components ensure reliable operation across demanding projects, and responsive controls enable rapid humidity reduction when needed while maintaining steady-state conditions during long-term operation.\n\u003c\/p\u003e","products":[{"product_id":"bry-air-minipac-mp-350-dehumidifier","title":"Bry-Air MiniPAC MP-350 Desiccant Dehumidifier – 350 CFM, 11.7 lbs\/hr, 3-Phase","description":"\u003cp data-ai-overview=\"true\"\u003e\u003cstrong\u003eThe Bry-Air MiniPAC MP-350 is a 350 CFM three-phase desiccant dehumidifier for mid-scale industrial humidity control\u003c\/strong\u003e — removes 11.7 lbs of moisture per hour and operates effectively below freezing where refrigerant equipment fails. Specified for pharmaceutical manufacturing, food processing, electronics assembly, and large-format cold storage. Stainless desiccant rotor housing for corrosive and high-cycling environments.\u003c\/p\u003e\n\n\u003ch2\u003eMP-350 MiniPAC Desiccant Dehumidifier — 350 CFM Three-Phase Humidity Control for Industrial and Critical Environments\u003c\/h2\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-350 is a 350 CFM desiccant dehumidifier engineered for mid-scale industrial and institutional applications where refrigerant equipment cannot maintain target humidity: pharmaceutical manufacturing floors, cold storage warehouses, electronics production areas, and laboratories requiring sustained low relative humidity independent of ambient temperature. At 11.7 lbs\/hr moisture removal and 222 lbs, the MP-350 handles applications that exceed single-phase MiniPAC capacity — stepping up to three-phase power for higher throughput while retaining the compact MiniPAC footprint that fits in mechanical rooms and process areas where full-scale industrial desiccant units are impractical.\u003c\/p\u003e\n\n\u003ch3\u003eMP-350 Desiccant Wheel Technology and Safety Systems\u003c\/h3\u003e\n\n\u003cp\u003eThe MP-350 uses a rotating desiccant wheel — not a compressor or refrigerant circuit. Process air (350 CFM) passes through the desiccant rotor where moisture is adsorbed into the hygroscopic matrix. The rotor continuously rotates into the reactivation sector where heated reactivation air (117 CFM) drives absorbed moisture out and exhausts it away from the dry process stream. No icing threshold, no defrost cycle, no compressor maintenance — the unit provides continuous moisture removal across operating conditions where LGR equipment fails.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e350 CFM process airflow at 0.90\" wc external static\u003c\/strong\u003e — sized for larger laboratories, pharmaceutical production rooms, cold storage areas, and industrial process environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e11.7 lbs\/hr moisture removal\u003c\/strong\u003e — consistent extraction rate across the full operating temperature range, independent of ambient conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater-washable desiccant rotor with stainless steel flange\u003c\/strong\u003e — field-serviceable without chemical cleaning agents; stainless flange resists corrosion during high-humidity intake operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulated airflow sectors\u003c\/strong\u003e — physically separate process and reactivation airstreams to prevent cross-contamination of dry process air with humid reactivation exhaust\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDifferential air pressure switch\u003c\/strong\u003e — monitors airflow continuously and triggers alarm or controlled shutdown if filter blockage or blower failure reduces flow below threshold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety thermostat\u003c\/strong\u003e — protects reactivation heater from overtemperature during 24\/7 continuous-duty operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReactivation cooldown sequence\u003c\/strong\u003e — cools the heater element after shutdown before full stop, extending heater life in continuous-duty applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuto\/manual operating modes\u003c\/strong\u003e — auto for humidistat-controlled cycling; manual for scheduled or fixed-rate drying operations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMultiple mounting configurations\u003c\/strong\u003e — floor-standing, wall-mounted, or duct-inline installation to suit mechanical room constraints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-350 Applications and Environments\u003c\/h3\u003e\n\n\u003cp\u003ePharmaceutical manufacturers deploy the MP-350 in tablet coating rooms, active pharmaceutical ingredient (API) processing areas, and packaging lines where moisture above 30–35% RH causes hygroscopic ingredients to absorb moisture, clump, and degrade. Cold storage facilities and refrigerated distribution centers use it in staging areas and loading docks where low ambient temperatures make refrigerant dehumidifiers ineffective — the desiccant rotor operates normally at temperatures well below freezing. Electronics manufacturers and defense depot maintenance facilities specify desiccant dehumidifiers in circuit board assembly and component storage areas to prevent corrosion and electrostatic discharge failures driven by surface humidity. Museum collections, archival libraries, and document preservation vaults use the MP-350 for continuous humidity management where paper, film, and artifact materials require stable low-humidity conditions year-round.\u003c\/p\u003e\n\n\u003ch3\u003eDesiccant vs. Refrigerant: Technology Selection Criteria\u003c\/h3\u003e\n\n\u003cp\u003eRefrigerant and LGR dehumidifiers cool process air below its dew point to condense moisture onto evaporator coils. As ambient temperature drops, the coils must cool further; below approximately 45–50°F they ice over and trigger defrost cycles that interrupt dehumidification. Below 35°F, most refrigerant units cease effective operation. The MP-350's desiccant rotor adsorbs moisture through a chemical process with no icing threshold — it operates from sub-freezing temperatures through 140°F and can drive relative humidity well below the 40–45% RH floor that limits LGR equipment. The MP-350 operates on three-phase 208–240V or 460\/480V 60Hz power and the reactivation exhaust — warm and moisture-laden at 117 CFM — must be ducted to the building exterior. Returning that exhaust to the conditioned space eliminates the dehumidification effect entirely.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP-350 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess CFM\u003c\/th\u003e\n\u003ctd\u003e350 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess External Static\u003c\/th\u003e\n\u003ctd\u003e0.90\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation CFM\u003c\/th\u003e\n\u003ctd\u003e117 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation External Static\u003c\/th\u003e\n\u003ctd\u003e-0.70\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMoisture Removal\u003c\/th\u003e\n\u003ctd\u003e11.7 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e208–240V \/ 3-phase \/ 60Hz or 460–480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e222 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotor\u003c\/th\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Modes\u003c\/th\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSafety Systems\u003c\/th\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-350_Overview.pdf?v=1739989137\"\u003e\u003cstrong\u003eMiniPAC MP-350 Overview\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":46509394952349,"sku":"MP-350","price":13020.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":46509394985117,"sku":"MP-350","price":13390.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":46509395017885,"sku":"MP-350","price":13530.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":46509395050653,"sku":"MP-350","price":14990.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":46509395083421,"sku":"MP-350","price":15360.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":46509395116189,"sku":"MP-350","price":15500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/product-39479905222813_d9ae1d65-748c-48a4-9b69-e6a0ab41c211.webp?v=1774460780"},{"product_id":"bry-air-minipac-mp-1800-dehumidifier","title":"Bry-Air MiniPAC MP-1800 Desiccant Dehumidifier – 1800 CFM, 54 lbs\/hr","description":"\u003ch2\u003eMP-1800 MiniPAC Desiccant Dehumidifier — 1800 CFM High-Volume Industrial Moisture Control Without Refrigerant Limitations\u003c\/h2\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-1800 is an 1,800 CFM desiccant dehumidifier rated at 54 lbs\/hr moisture removal — the highest-output unit in the MiniPAC series before stepping into Bry-Air's full-size industrial line. It is built for large manufacturing floors, cold storage warehouses, pharmaceutical production suites, and food processing facilities where refrigerant equipment fails to maintain required humidity levels due to low ambient temperature, high moisture loads, or the need to drive relative humidity below 30% RH. The MP-1800 operates on 460\/480V 3-phase power and weighs 532 lbs — a full industrial unit in a self-contained package suited to mechanical room installation.\u003c\/p\u003e\n\n\u003ch3\u003eMP-1800 Desiccant Rotor Capacity and Safety Systems\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1,800 CFM process airflow at 1.7\" wc external static\u003c\/strong\u003e — handles large open manufacturing floors, warehouse sections, refrigerated loading docks, and multi-room pharmaceutical suites requiring continuous high-volume dehumidification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e54 lbs\/hr moisture removal under standard conditions\u003c\/strong\u003e — consistent extraction rate at low temperatures where a refrigerant unit at equivalent CFM would be cycling through defrost or shut down entirely\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e600 CFM reactivation airflow at 0.5\" wc\u003c\/strong\u003e — reactivation airstream removes adsorbed moisture from the desiccant rotor and exhausts it to the exterior; 600 CFM reactivation exhaust duct must terminate outside the building envelope\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesiccant rotor with stainless steel flange\u003c\/strong\u003e — water-washable media for on-site maintenance; stainless flange resists corrosion in high-humidity intake environments and during rotor washing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulated process and reactivation airflow chambers\u003c\/strong\u003e — thermally separated to prevent humid reactivation exhaust from contaminating conditioned process air output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e460\/480V \/ 3-phase \/ 60Hz power requirement\u003c\/strong\u003e — dedicated 3-phase electrical circuit required; facility electrician must verify panel capacity and circuit sizing before installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e532 lb unit weight\u003c\/strong\u003e — floor-mounting in a mechanical room or equipment pad is standard; structural load-bearing must be confirmed for suspended or elevated installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDifferential air pressure switch\u003c\/strong\u003e — monitors process airflow and triggers alarm or controlled shutdown if filter blockage or fan fault reduces airflow below operating threshold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety thermostat on reactivation heater\u003c\/strong\u003e — protects heater elements from overtemperature during continuous 24\/7 operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReactivation cooldown sequence\u003c\/strong\u003e — heater elements cool before final shutdown to extend service life and prevent thermal shock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional weather kit, room humidistat, and duct humidistat add-ons\u003c\/strong\u003e — weather kit enables outdoor or semi-exposed installation; humidistat options enable setpoint-controlled auto cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-1800 Applications: Pharmaceutical, Food Processing, Cold Storage, and Power Generation\u003c\/h3\u003e\n\n\u003cp\u003ePharmaceutical manufacturers specify the MP-1800 for large tablet coating lines, granulation rooms, and bulk powder packaging areas where moisture above 35% RH causes caking, coating failure, and active ingredient degradation at process scale. Food processing facilities — including candy production, soft gelatin capsule manufacturing, and onion drying operations — rely on it for the precise, continuous humidity control that refrigerant equipment cannot maintain when production temperatures drop near or below 50°F. Cold storage and refrigerated logistics operators install it at loading docks and staging areas where condensation on product, pallets, and rack structures is a daily operational problem that refrigerant dehumidifiers cannot resolve at low ambient temperatures. Power generation facilities use desiccant units to protect generators, turbines, and HRSG systems from corrosion during standby periods. Museums, archives, and library storage rooms specify the MP-1800 where a smaller MiniPAC unit is under-capacity for the space volume and collection moisture load.\u003c\/p\u003e\n\n\u003ch3\u003eDesiccant vs. Refrigerant at 1800 CFM: Scale Considerations for Industrial Deployments\u003c\/h3\u003e\n\n\u003cp\u003eAt 1,800 CFM, the difference in operating behavior between desiccant and refrigerant technology becomes a direct operational cost question. A refrigerant unit at this CFM rating requires substantial compressor capacity — and that compressor produces zero moisture removal during defrost cycles. In a cold loading dock or freezer staging area cycling through defrost every 30–60 minutes, a significant fraction of total operating time produces no dehumidification. The MP-1800's desiccant rotor operates continuously with no defrost interruption, delivering the full 54 lbs\/hr extraction rate across the temperature range of the application. The reactivation exhaust — 600 CFM of warm, humid air — must be ducted to the exterior; returning it to the conditioned space negates the dehumidification output. 460\/480V 3-phase power is required; single-phase service is not compatible with this unit.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP-1800 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess CFM\u003c\/th\u003e\n\u003ctd\u003e1,800 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess External Static\u003c\/th\u003e\n\u003ctd\u003e1.7\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation CFM\u003c\/th\u003e\n\u003ctd\u003e600 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation External Static\u003c\/th\u003e\n\u003ctd\u003e0.5\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMoisture Removal\u003c\/th\u003e\n\u003ctd\u003e54 lbs\/hr (standard conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e460\/480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e532 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotor\u003c\/th\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Modes\u003c\/th\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSafety Systems\u003c\/th\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOptional Add-ons\u003c\/th\u003e\n\u003ctd\u003eWeather kit, room humidistat, duct humidistat\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-1800_Overview.pdf?v=1742726185\"\u003e\u003cstrong\u003eMP-1800 Overview\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":46619283161245,"sku":"MP-1800","price":49780.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":46619283194013,"sku":"MP-1800","price":50150.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":46619283226781,"sku":"MP-1800","price":50285.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":46619283259549,"sku":"MP-1800","price":52940.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":46619283292317,"sku":"MP-1800","price":53310.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":46619283325085,"sku":"MP-1800","price":53450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/5.webp?v=1754757290"},{"product_id":"bry-air-minipac-mp-600-desiccant-dehumidifier","title":"Bry-Air MiniPAC MP-600 Desiccant Dehumidifier – 600 CFM, 20 lbs\/hr, 3-Phase","description":"\u003ch2\u003eMP-600 MiniPAC Desiccant Dehumidifier — 600 CFM Three-Phase Industrial Humidity Control Without a Compressor\u003c\/h2\u003e\n\u003cp\u003eThe Bry-Air MiniPAC MP-600 is a 600 CFM desiccant dehumidifier built for industrial and institutional applications that demand continuous, temperature-independent moisture removal: pharmaceutical manufacturing, cold storage warehouses, electronics production, and process environments where refrigerant equipment cannot sustain target humidity. At 20 lbs\/hr moisture removal and 306 lbs, the MP-600 handles mid-scale industrial moisture loads — providing nearly twice the throughput of the MP-350 in a self-contained unit that connects to standard three-phase industrial power without the engineering overhead of a custom desiccant system installation.\u003c\/p\u003e\n\u003ch3\u003eMP-600 Desiccant Wheel Technology and Safety Systems\u003c\/h3\u003e\n\u003cp\u003eThe MP-600 uses a rotating desiccant wheel rather than a compressor and refrigerant circuit. Process air (600 CFM) passes continuously through the desiccant rotor where moisture is adsorbed into the hygroscopic matrix. The rotor rotates into the reactivation sector where heated reactivation air (200 CFM) drives absorbed moisture out of the rotor and exhausts it away from the process airstream. No compressor, no evaporator, no refrigerant charge — the unit removes moisture continuously at temperatures and humidity levels where LGR equipment would ice over, defrost, or cease effective operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 CFM process airflow at 0.75\" wc external static\u003c\/strong\u003e — sized for large laboratories, pharmaceutical production areas, cold storage warehouses, and mid-scale industrial process environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 lbs\/hr moisture removal\u003c\/strong\u003e — consistent extraction rate across the full operating temperature range, independent of ambient conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-washable desiccant rotor with stainless steel flange\u003c\/strong\u003e — field-serviceable without chemical cleaning agents; stainless flange resists corrosion in high-humidity intake conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulated airflow sectors\u003c\/strong\u003e — physically separate the process and reactivation airstreams, preventing humid reactivation exhaust from contaminating the dry process air path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential air pressure switch\u003c\/strong\u003e — monitors airflow continuously and triggers alarm or controlled shutdown if filter blockage or blower failure reduces flow below the operating threshold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety thermostat\u003c\/strong\u003e — protects the reactivation heater from overtemperature during 24\/7 continuous-duty operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReactivation cooldown sequence\u003c\/strong\u003e — cools the heater element after shutdown before full stop, extending heater life in continuous-duty applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto\/manual operating modes\u003c\/strong\u003e — auto for humidistat-controlled cycling; manual for scheduled or fixed-rate drying operations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple mounting configurations\u003c\/strong\u003e — floor-standing, wall-mounted, or duct-inline installation for mechanical room and process area constraints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP-600 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003ePharmaceutical manufacturers deploy the MP-600 in API processing areas, tablet coating rooms, and packaging lines where sustained humidity below 35% RH is a GMP requirement. Cold storage facilities and refrigerated distribution centers use it in loading docks and staging zones where sub-freezing ambient temperatures disable refrigerant dehumidifiers — the desiccant rotor functions normally at temperatures well below 32°F. Electronics manufacturers and semiconductor facilities specify desiccant dehumidifiers in cleanroom ante-rooms and component storage areas to prevent corrosion-related failures in moisture-sensitive assemblies. Archives, museum conservation labs, and rare document storage facilities use the MP-600 for 24\/7 humidity control where paper, magnetic media, and artifact materials require sustained low relative humidity. Industrial process environments including lithium battery production, chemical production areas, and power generation facilities use it where humidity control is a process requirement rather than a comfort parameter.\u003c\/p\u003e\n\u003ch3\u003eDesiccant vs. Refrigerant: Technology Selection Criteria\u003c\/h3\u003e\n\u003cp\u003eRefrigerant and LGR dehumidifiers remove moisture by cooling process air below its dew point onto evaporator coils. Below approximately 45–50°F those coils ice over, blocking airflow and triggering defrost cycles that interrupt dehumidification. Below 35°F, most refrigerant units cease effective operation. The MP-600's desiccant rotor adsorbs moisture through a chemical process with no icing threshold — it operates from sub-freezing temperatures through 140°F and can achieve grain depressions well below the 40–45% RH floor that limits LGR equipment. The MP-600 operates on three-phase 208–240V or 460–480V 60Hz power. The reactivation exhaust — warm and moisture-laden at 200 CFM — must be ducted to the building exterior. Returning that exhaust to the conditioned space eliminates the dehumidification effect and must be accounted for in the building's ventilation balance.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP-600 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcess CFM\u003c\/th\u003e\n\u003ctd\u003e600 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcess External Static\u003c\/th\u003e\n\u003ctd\u003e0.75\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReactivation CFM\u003c\/th\u003e\n\u003ctd\u003e200 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReactivation External Static\u003c\/th\u003e\n\u003ctd\u003e0.45\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture Removal\u003c\/th\u003e\n\u003ctd\u003e20 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e208–240V \/ 3-phase \/ 60Hz or 460–480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e306 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRotor\u003c\/th\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Modes\u003c\/th\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSafety Systems\u003c\/th\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe title=\"Bry-Air Industrial MiniPAC 600 MP-600 Desiccant Dehumidifier 240V 3 Phase\" src=\"https:\/\/www.youtube.com\/embed\/JZdUWdIzjQ8\" height=\"315\" width=\"700\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-600-Overview.pdf?v=1745170240\"\u003e\u003cstrong\u003eMiniPAC MP-600 Overview\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":46684012413085,"sku":"MP-600","price":23705.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":46684012445853,"sku":"MP-600","price":24045.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":46684012478621,"sku":"MP-600","price":25400.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":46684012511389,"sku":"MP-600","price":27085.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":46684012544157,"sku":"MP-600","price":27455.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":46684012576925,"sku":"MP-600","price":27595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/2.webp?v=1754755614"},{"product_id":"bry-air-minipac-mp-2700-desiccant-dehumidifier","title":"Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier – 2700 CFM, 460V 3-Phase","description":"\u003ch2\u003eMP-2700 MiniPAC Desiccant Dehumidifier — 2700 CFM Large-Scale Industrial Moisture Control with PLC Controls and MODBUS Connectivity\u003c\/h2\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-2700 is the largest unit in the MiniPAC series, rated at 2,700 CFM process airflow with an 840 CFM reactivation circuit and a 42 kW heater bank — built for large industrial facilities where refrigerant dehumidification is not viable due to low operating temperatures, extremely high moisture loads, or humidity targets below 30% RH that refrigerant equipment cannot sustain. Unlike smaller MiniPAC units, the MP-2700 includes a touch-screen PLC with MODBUS RS485 communication, enabling integration with building management systems and automated process control environments. It operates on 460V 3-phase power at 61 full-load amps and is designed for continuous 24\/7 duty in demanding industrial process environments.\u003c\/p\u003e\n\n\u003ch3\u003eMP-2700 Desiccant Rotor, Heater Bank, and PLC Control System\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2,700 CFM process airflow at 1.26\" wc (32 mm) external static\u003c\/strong\u003e — largest MiniPAC process airflow rating; handles very large manufacturing floors, warehouse zones, and multi-room industrial complexes requiring continuous high-volume moisture extraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e840 CFM reactivation airflow at 0.98\" wc (25 mm) external static\u003c\/strong\u003e — proportionally larger reactivation circuit than smaller MiniPAC units; 840 CFM of warm, humid exhaust must be ducted to the building exterior\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e42 kW heater bank with SSR (solid-state relay) control\u003c\/strong\u003e — solid-state relay switching eliminates the mechanical wear and contact erosion of electromechanical contactors; provides precise heater staging for consistent reactivation temperature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesiccant rotor with stainless steel flange and edge-hardened media\u003c\/strong\u003e — edge hardening extends rotor media life in high-dust or high-particulate intake environments; stainless steel flange resists corrosion during field washing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTouch-screen PLC with MODBUS RS485 connectivity\u003c\/strong\u003e — enables remote monitoring and control integration with building automation systems, DCS platforms, or SCADA systems; reduces on-site operator intervention in automated facilities\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3 HP \/ 2.2 kW process motor; 1.5 HP \/ 1.1 kW reactivation motor\u003c\/strong\u003e — independently powered process and reactivation fans allow the unit to maintain airflow balance across both circuits\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e460V \/ 3-phase \/ 60Hz at 61 full-load amps\u003c\/strong\u003e — requires a dedicated 3-phase circuit with appropriate breaker and wire gauge for 61 FLA; consult a licensed industrial electrician for circuit sizing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndependent pressure switches and temperature displays\u003c\/strong\u003e — separate monitoring of process and reactivation circuits allows fault isolation without shutting down the entire unit for diagnostic checks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReactivation safety thermostat\u003c\/strong\u003e — protects the 42 kW heater bank from overtemperature during sustained continuous operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact self-contained design\u003c\/strong\u003e — unit dimensions 1,227 × 1,156 × 830 mm (L × W × H); process inlet duct 577 × 267 mm; reactivation outlet collar Ø 197 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-2700 Applications: Large Industrial Plants, Lithium Battery Manufacturing, Power Generation, and Archival Storage\u003c\/h3\u003e\n\n\u003cp\u003eLithium battery and electronics manufacturing facilities are among the most demanding desiccant dehumidifier applications — lithium battery cell assembly requires relative humidity below 1% RH in dry rooms, a target no refrigerant equipment can approach. The MP-2700 handles the airflow volumes required for large dry room environments at the process scale of industrial battery production. Chemical processing plants and pharmaceutical bulk API manufacturing areas require continuous low-humidity conditions across large process floors where refrigerant equipment's temperature sensitivity and humidity floor limitations disqualify it. Power generation facilities use large desiccant units to protect turbines, generators, and HRSG systems from corrosion during layup and standby — periods when the equipment is at ambient temperature and refrigerant dehumidifiers cannot operate at low-humidity setpoints. Museums and archival facilities with large collection storage areas, where tight humidity control across seasonal temperature swings is required, specify the MP-2700 where smaller MiniPAC units are under-capacity for the space volume.\u003c\/p\u003e\n\n\u003ch3\u003eDesiccant at 2700 CFM: MODBUS Integration, 3-Phase Power, and Ducting Requirements\u003c\/h3\u003e\n\n\u003cp\u003eAt 2,700 CFM, the MP-2700 is sized for integration into building management systems rather than standalone operation — its MODBUS RS485 interface allows the unit to receive setpoint commands and report operating status to a central BAS or SCADA platform. This is particularly relevant in pharmaceutical GMP environments, cleanroom facilities, and automated manufacturing plants where humidity must be logged continuously for process validation and regulatory compliance. The 840 CFM reactivation exhaust must terminate at the building exterior with a duct system rated for the 0.98\" wc static constraint — sizing this duct requires a mechanical engineer to account for duct length, fittings, and terminal conditions. The unit draws 61 full-load amps at 460V 3-phase; the dedicated circuit must be sized accordingly by a licensed industrial electrician. Reactivation exhaust must not be returned to the conditioned space under any configuration — it carries the full extracted moisture load and will negate the dehumidification output if recirculated.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP-2700 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess CFM\u003c\/th\u003e\n\u003ctd\u003e2,700 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess External Static\u003c\/th\u003e\n\u003ctd\u003e1.26\" wc (32 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation CFM\u003c\/th\u003e\n\u003ctd\u003e840 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation External Static\u003c\/th\u003e\n\u003ctd\u003e0.98\" wc (25 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeater Bank\u003c\/th\u003e\n\u003ctd\u003e42 kW with SSR control\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e460V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFull Load Amps\u003c\/th\u003e\n\u003ctd\u003e61 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess Motor\u003c\/th\u003e\n\u003ctd\u003e3 HP \/ 2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation Motor\u003c\/th\u003e\n\u003ctd\u003e1.5 HP \/ 1.1 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit Dimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e1,227 × 1,156 × 830 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProcess Inlet Duct\u003c\/th\u003e\n\u003ctd\u003e577 × 267 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReactivation Outlet Collar\u003c\/th\u003e\n\u003ctd\u003eØ 197 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotor\u003c\/th\u003e\n\u003ctd\u003eWater-washable, stainless steel flange, edge-hardened media\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eControls\u003c\/th\u003e\n\u003ctd\u003eTouch-screen PLC with MODBUS RS485\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSafety Systems\u003c\/th\u003e\n\u003ctd\u003eIndependent pressure switches, safety thermostat, reactivation cooldown, SSR heater control, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":46941778772125,"sku":"MP-2700","price":65230.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":46941778804893,"sku":"MP-2700","price":65595.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":46941778837661,"sku":"MP-2700","price":65730.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":46941778870429,"sku":"MP-2700","price":69650.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":46941778903197,"sku":"MP-2700","price":70025.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":46941778935965,"sku":"MP-2700","price":70165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/5.webp?v=1754757290"},{"product_id":"bry-air-minipac-mp-1200-desiccant-dehumidifier","title":"Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – 1200 CFM, 39.6 lbs\/hr","description":"\u003ch2\u003eMP-1200 MiniPAC Desiccant Dehumidifier — 1200 CFM Industrial Moisture Control Below Refrigerant Operating Limits\u003c\/h2\u003e\n\u003cp\u003eThe Bry-Air MiniPAC MP-1200 is a 1,200 CFM desiccant dehumidifier built for large commercial and industrial spaces where refrigerant and LGR units cannot maintain required humidity levels: cold storage facilities, pharmaceutical manufacturing areas, large warehouse environments, and any application requiring consistent low-humidity output independent of ambient temperature. At 39.6 lbs\/hr moisture removal capacity under standard conditions, the MP-1200 handles the throughput demands of large mechanical rooms and process environments while occupying a compact footprint suited to retrofit and new-construction installations alike. Because it operates on a desiccant rotor rather than a compressor-driven refrigerant circuit, it has no icing threshold and no defrost cycle interruption.\u003c\/p\u003e\n\u003ch3\u003eMP-1200 Desiccant Rotor Performance and Safety Systems\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200 CFM process airflow at 0.75\" wc external static\u003c\/strong\u003e — sized for large commercial spaces, warehouse sections, manufacturing floors, and cleanrooms requiring continuous high-volume moisture extraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39.6 lbs\/hr moisture removal under standard conditions\u003c\/strong\u003e — consistent extraction rate independent of ambient temperature; refrigerant units at equivalent CFM lose substantial capacity in cold or low-humidity inlet conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 CFM reactivation airflow at 0.45\" wc\u003c\/strong\u003e — reactivation airstream drives adsorbed moisture out of the desiccant rotor and exhausts it away from the process airstream; must be ducted to building exterior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesiccant rotor with stainless steel flange\u003c\/strong\u003e — water-washable rotor media can be rinsed on-site without chemical agents; stainless flange resists corrosion during washing and in high-humidity intake conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulated process and reactivation airflow chambers\u003c\/strong\u003e — thermally separated to prevent warm, humid reactivation exhaust from mixing with conditioned process air, preserving desiccant efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e460V \/ 3-phase \/ 60Hz power requirement\u003c\/strong\u003e — requires dedicated 3-phase electrical supply; not compatible with single-phase service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential air pressure switch\u003c\/strong\u003e — monitors process airflow; triggers controlled shutdown or alarm if filter blockage or fan failure reduces airflow below operating threshold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety thermostat on reactivation heater\u003c\/strong\u003e — prevents overtemperature damage to heater elements during sustained 24\/7 operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReactivation cooldown sequence\u003c\/strong\u003e — cools heater elements after shutdown before full stop, extending component service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto\/manual operating modes\u003c\/strong\u003e — auto for humidistat-controlled cycling; manual for fixed-rate or scheduled drying applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple mounting configurations\u003c\/strong\u003e — floor-standing, wall-mounted, or duct-inline installation for space-constrained mechanical rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP-1200 Applications: Large Warehouses, Pharma, Cold Storage, and Archival Facilities\u003c\/h3\u003e\n\u003cp\u003ePharmaceutical manufacturers use the MP-1200 in tablet coating lines, powder blending rooms, and packaging areas where moisture above 30–40% RH causes caking, coating defects, and active ingredient degradation. Cold storage operators install it in staging areas and refrigerated loading docks where the low ambient temperature disables refrigerant dehumidifiers but condensation on product and rack surfaces remains a persistent problem. Large distribution warehouses and automotive parts storage facilities use it to control condensation on metal components, stored electronics, and hygroscopic packaging materials year-round. Military depot maintenance facilities and government archival storage rooms specify desiccant units where refrigerant equipment cannot sustain the required humidity floor below 40% RH. Data centers and critical infrastructure environments with low-temperature setpoints use the MP-1200 where a refrigerant unit's capacity would degrade unacceptably as inlet temperature drops.\u003c\/p\u003e\n\u003ch3\u003eDesiccant vs. Refrigerant at 1200 CFM: Technology Selection for Industrial Scale\u003c\/h3\u003e\n\u003cp\u003eRefrigerant dehumidifiers at 1,200 CFM face the same fundamental limitation as smaller units: as ambient temperature drops below approximately 45–50°F, evaporator coils approach icing conditions, triggering defrost cycles that interrupt moisture removal — and below 35°F, most refrigerant units cease effective operation. At industrial scale, these interruptions compound: a 1,200 CFM refrigerant unit cycling through defrost in a cold loading dock removes zero moisture during each defrost period. The MP-1200's desiccant rotor adsorbs moisture through a chemical process with no temperature threshold and no defrost interruption — it delivers the same 39.6 lbs\/hr removal rate at 20°F that it delivers at 75°F. The reactivation exhaust must be ducted to the building exterior; returning it to the conditioned space re-introduces the extracted moisture and negates dehumidification. 3-phase electrical service at 460V is required — verify panel capacity and circuit sizing before installation.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP-1200 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcess CFM\u003c\/th\u003e\n\u003ctd\u003e1,200 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProcess External Static\u003c\/th\u003e\n\u003ctd\u003e0.75\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReactivation CFM\u003c\/th\u003e\n\u003ctd\u003e400 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReactivation External Static\u003c\/th\u003e\n\u003ctd\u003e0.45\" wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture Removal\u003c\/th\u003e\n\u003ctd\u003e39.6 lbs\/hr (standard conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e460V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L × W × H)\u003c\/th\u003e\n\u003ctd\u003e47.3\" × 34.6\" × 24.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRotor\u003c\/th\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Modes\u003c\/th\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting Options\u003c\/th\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSafety Systems\u003c\/th\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47330880520349,"sku":"MP-1200","price":39225.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47330880553117,"sku":"MP-1200","price":39595.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47330880585885,"sku":"MP-1200","price":39730.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47330880618653,"sku":"MP-1200","price":41845.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47330880651421,"sku":"MP-1200","price":42215.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47330880684189,"sku":"MP-1200","price":42460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/compact_dehumidifier_MiniPAC.webp?v=1774460717"},{"product_id":"bry-air-minipac-mp-350-desiccant-dehumidifier-stainless-steel","title":"Bry-Air MiniPAC MP-350 Desiccant Dehumidifier – Stainless Steel","description":"\u003ch2\u003eMP-350 Desiccant Dehumidifier — 3-Phase Low-Humidity Control for Industrial Environments\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade to order — estimated 5-week lead time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-350 is a 350 CFM desiccant dehumidifier designed for facilities where refrigerant systems cannot maintain target humidity levels. Delivering 11.7 lbs\/hr moisture removal independent of ambient temperature, it supports pharmaceutical production, cold storage, and electronics manufacturing environments requiring stable low RH. This stainless steel configuration is specified for corrosion resistance and long-term operation in controlled or washdown areas.\u003c\/p\u003e\n\n\u003ch3\u003eBry-Air MP-350 Continuous Low-Temperature Drying Capacity\u003c\/h3\u003e\n\u003cp\u003eThe MP-350 provides stable moisture removal without the performance drop-offs or defrost interruptions associated with refrigerant systems.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent moisture removal\u003c\/strong\u003e — maintains 11.7 lbs\/hr extraction across low and high temperature conditions where LGR units lose capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 CFM process airflow\u003c\/strong\u003e — supports larger labs, production rooms, and cold storage staging areas without stepping into full industrial units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-phase power configuration\u003c\/strong\u003e — enables higher throughput using 208–240V or 460–480V electrical infrastructure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e — resists corrosion in high-humidity intake and washdown environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo defrost cycle\u003c\/strong\u003e — eliminates downtime caused by coil icing in sub-50°F operating conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow safety monitoring\u003c\/strong\u003e — prevents operation under restricted airflow caused by filter loading or blower issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-350 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe MP-350 is used in pharmaceutical manufacturing for tablet coating, API processing, and packaging areas where humidity affects product stability and handling. Cold storage warehouses and distribution centers install it in staging areas and loading docks where refrigerant systems cannot operate due to low ambient temperatures. Electronics manufacturing facilities and defense maintenance depots rely on desiccant drying to prevent corrosion and moisture-related failures in circuit boards and assemblies. Laboratories and testing facilities use it to maintain controlled low-humidity environments for sensitive instrumentation. It is also deployed in archival storage, museums, and document preservation facilities where consistent humidity control is required year-round.\u003c\/p\u003e\n\n\u003ch3\u003eMP-350 Desiccant Wheel Operation and Exhaust Requirements\u003c\/h3\u003e\n\u003cp\u003eThe MP-350 uses a rotating desiccant wheel to adsorb moisture from the process airstream, eliminating the need for a compressor or evaporator coil. Moisture is continuously removed through a heated reactivation airstream that must be ducted to the exterior of the building. This design allows operation from sub-freezing temperatures up to 140°F with no defrost cycles or capacity loss. The stainless steel housing supports installations requiring corrosion resistance or periodic cleaning protocols.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMP-350 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.90 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e117 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-0.70 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMoisture Removal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.7 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e208–240V \/ 3-phase \/ 60Hz or 460–480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e222 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-washable with stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order, approximately 5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003c!-- Add document links here --\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47862690283677,"sku":"MP-350","price":18275.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47862690316445,"sku":"MP-350","price":18660.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47862690349213,"sku":"MP-350","price":18800.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47862690381981,"sku":"MP-350","price":22075.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47862690414749,"sku":"MP-350","price":22455.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47862690447517,"sku":"MP-350","price":22595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-350_stainless_steel.webp?v=1777389641"},{"product_id":"bry-air-minipac-mp-1800-desiccant-dehumidifier-stainless-steel","title":"Bry-Air MiniPAC MP-1800 Desiccant Dehumidifier – Stainless Steel","description":"\u003ch2\u003eMP-1800 Desiccant Dehumidifier — High-Volume Moisture Control Below Refrigerant Limits\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade to order — estimated 5-week lead time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-1800 is an 1,800 CFM desiccant dehumidifier built for large-scale environments where refrigerant systems cannot maintain humidity targets. Delivering 54 lbs\/hr moisture removal without performance loss at low temperatures, it supports manufacturing, cold storage, and processing facilities requiring continuous drying. This stainless steel configuration is specified for corrosion resistance in demanding industrial and washdown environments.\u003c\/p\u003e\n\n\u003ch3\u003eBry-Air MP-1800 High-Capacity Desiccant Performance\u003c\/h3\u003e\n\u003cp\u003eThe MP-1800 provides continuous moisture removal at scale without defrost interruptions or temperature-related capacity loss.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e54 lbs\/hr moisture removal\u003c\/strong\u003e — maintains consistent extraction under low-temperature and high-load conditions where refrigerant systems cycle or shut down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800 CFM process airflow\u003c\/strong\u003e — supports large open areas, loading docks, and multi-room production spaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 CFM reactivation airflow\u003c\/strong\u003e — continuously purges absorbed moisture through a dedicated exhaust airstream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e — resists corrosion in high-humidity intake and washdown installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo defrost cycle\u003c\/strong\u003e — eliminates downtime associated with coil icing in cold environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow safety controls\u003c\/strong\u003e — protects operation by monitoring airflow and triggering shutdown under restricted conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-1800 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe MP-1800 is deployed in pharmaceutical manufacturing for tablet coating, granulation, and bulk packaging areas where humidity directly impacts product stability. Food processing facilities use it in confectionery production, gelatin processing, and dehydration operations where moisture control must remain consistent at lower temperatures. Cold storage warehouses and refrigerated distribution centers install it at loading docks and staging zones to prevent condensation on products, pallets, and structural surfaces. Power generation facilities apply desiccant drying to protect turbines, generators, and auxiliary systems from corrosion during standby. Museums, archives, and large-scale storage facilities use the MP-1800 when smaller systems cannot meet space volume or moisture load requirements.\u003c\/p\u003e\n\n\u003ch3\u003eMP-1800 Desiccant System Operation and Installation Requirements\u003c\/h3\u003e\n\u003cp\u003eThe MP-1800 uses a rotating desiccant wheel to adsorb moisture from the process airstream, eliminating the need for compressors or evaporator coils. A dedicated reactivation airstream removes collected moisture and must be ducted to the building exterior to maintain system effectiveness. The unit operates continuously from sub-freezing temperatures up to 140°F with no defrost cycle or capacity drop. Installation requires 460\/480V three-phase power and floor-mounted placement due to unit weight and airflow capacity.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMP-1800 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,800 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMoisture Removal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e460\/480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e532 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-washable with stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFloor-mounted, ducted installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptional Add-ons\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWeather kit, room humidistat, duct humidistat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order, approximately 5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003c!-- Add document links here --\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47862894002333,"sku":"MP-1800","price":55225.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47862894035101,"sku":"MP-1800","price":55605.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47862894067869,"sku":"MP-1800","price":55745.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47862894100637,"sku":"MP-1800","price":62190.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47862894133405,"sku":"MP-1800","price":69525.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47862894166173,"sku":"MP-1800","price":69680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-1800_stainless_steel-removebg-preview.webp?v=1777383276"},{"product_id":"bry-air-minipac-mp-600-desiccant-dehumidifier-stainless-steel","title":"Bry-Air MiniPAC MP-600 Desiccant Dehumidifier – Stainless Steel","description":"\u003ch2\u003eMP-600 Desiccant Dehumidifier — 600 CFM Industrial Drying for Cold and Process Spaces\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade to order — estimated 5-week lead time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-600 is a 600 CFM desiccant dehumidifier designed for facilities where refrigerant units lose capacity or stop operating at low temperatures. It maintains steady moisture removal across the full operating range without defrost interruptions or performance drop-off. Compared to LGR systems at similar airflow, the MP-600 delivers consistent output in cold storage, pharmaceutical production, and process-controlled environments.\u003c\/p\u003e\n\n\u003ch3\u003eBry-Air MP-600 Continuous Low-Temperature Performance\u003c\/h3\u003e\n\u003cp\u003eDesiccant rotor operation removes the temperature limitations associated with compressor-based systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 CFM process airflow\u003c\/strong\u003e — supports mid-scale industrial areas including warehouse zones and production rooms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 lbs\/hr moisture removal\u003c\/strong\u003e — maintains consistent extraction as ambient temperatures drop below refrigerant operating limits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo defrost interruptions\u003c\/strong\u003e — eliminates downtime common in refrigerant systems operating below 50°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-washable rotor with stainless steel flange\u003c\/strong\u003e — allows field servicing while resisting corrosion in high-humidity intake conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated airflow safety controls\u003c\/strong\u003e — shuts down under low airflow or overtemperature conditions to protect components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible installation configurations\u003c\/strong\u003e — supports floor, wall, or ducted integration depending on facility layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-600 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe MP-600 is deployed in pharmaceutical manufacturing for API processing, tablet coating, and packaging areas where humidity must remain within controlled thresholds. Cold storage warehouses and refrigerated loading docks use it to prevent condensation on inventory and structural surfaces where refrigerant systems fail. Electronics manufacturing and semiconductor facilities rely on it in cleanroom support areas and component storage to reduce moisture-related defects. Archives, museums, and conservation labs use it to stabilize humidity for paper, film, and sensitive materials. Industrial process environments such as battery production, chemical processing, and power generation facilities apply it where humidity directly impacts process outcomes.\u003c\/p\u003e\n\n\u003ch3\u003eMP-600 Desiccant vs Refrigerant Operation\u003c\/h3\u003e\n\u003cp\u003eRefrigerant systems depend on coil temperatures dropping below the dew point, which becomes ineffective below 45–50°F due to icing and defrost cycling. The MP-600 uses a rotating desiccant rotor to adsorb moisture through a chemical process, maintaining output from sub-freezing conditions up to high ambient temperatures. The 200 CFM reactivation airstream removes moisture from the rotor and must be ducted outside; recirculating this exhaust will reintroduce moisture into the space. The unit operates on 208–240V or 460–480V three-phase power and requires proper ducting and electrical capacity verification during installation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMP-600 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMoisture Removal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e208–240V \/ 3-phase \/ 60Hz or 460–480V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e306 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003c!-- Add document links here --\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47867638022301,"sku":"MP-600","price":34820.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47867638055069,"sku":"MP-600","price":35200.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47867638087837,"sku":"MP-600","price":35345.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47867638120605,"sku":"MP-600","price":39040.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47867638153373,"sku":"MP-600","price":39420.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47867638186141,"sku":"MP-600","price":39560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-600_stainless_steel-removebg-preview.webp?v=1777383053"},{"product_id":"bry-air-minipac-mp-2700-desiccant-dehumidifier-stainless-steel","title":"Bry-Air MiniPAC MP-2700 Desiccant Dehumidifier – Stainless Steel","description":"\u003ch2\u003eMP-2700 Desiccant Dehumidifier — 2700 CFM Industrial Moisture Control with PLC Integration\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade to order — approximately 5-week lead time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-2700 is a 2,700 CFM desiccant dehumidifier designed for large-scale industrial environments where refrigerant systems cannot maintain low humidity targets. With integrated PLC controls and MODBUS connectivity, it supports continuous, automated operation in facilities requiring precise humidity control below 30% RH. This stainless steel configuration is specified for corrosion resistance in demanding process and washdown environments.\u003c\/p\u003e\n\n\u003ch3\u003eBry-Air MP-2700 High-Capacity Drying and Control Integration\u003c\/h3\u003e\n\u003cp\u003eThe MP-2700 combines high airflow capacity with integrated controls for facilities requiring centralized monitoring and process-level humidity management.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,700 CFM process airflow\u003c\/strong\u003e — supports large manufacturing floors, warehouse zones, and multi-room industrial environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e840 CFM reactivation airflow\u003c\/strong\u003e — continuously removes absorbed moisture and exhausts it from the building envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e42 kW heater bank with SSR control\u003c\/strong\u003e — provides stable reactivation temperatures without mechanical contact wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch-screen PLC with MODBUS RS485\u003c\/strong\u003e — integrates with BAS, SCADA, or DCS systems for remote monitoring and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e — resists corrosion in high-humidity intake and washdown installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo defrost cycle or icing threshold\u003c\/strong\u003e — maintains continuous moisture removal in low-temperature environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-2700 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe MP-2700 is used in lithium battery manufacturing and electronics production where extremely low humidity levels are required for process stability. Pharmaceutical and chemical processing facilities deploy it across large production floors to maintain controlled humidity for product quality and regulatory compliance. Cold storage warehouses and refrigerated logistics centers use it in staging and loading areas where refrigerant systems cannot operate effectively. Power generation facilities apply desiccant drying to protect turbines and auxiliary systems during standby and maintenance cycles. Museums, archives, and large-scale storage facilities rely on it to maintain stable humidity conditions across large volumes where smaller systems cannot meet capacity requirements.\u003c\/p\u003e\n\n\u003ch3\u003eMP-2700 Desiccant System Controls and Installation Requirements\u003c\/h3\u003e\n\u003cp\u003eThe MP-2700 uses a rotating desiccant wheel to adsorb moisture, eliminating compressors and refrigerant circuits. A dedicated 840 CFM reactivation airstream removes moisture and must be ducted to the building exterior to maintain system performance. The integrated PLC allows the unit to operate within automated building systems, enabling remote setpoint control and operational monitoring. Installation requires 460V three-phase power at 61 full-load amps, and duct design must account for external static pressure to maintain airflow balance across both process and reactivation circuits.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMP-2700 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2,700 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.26 in. wc (32 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e840 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.98 in. wc (25 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater Bank\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42 kW with SSR control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e460V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFull Load Amps\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e61 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 HP \/ 2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 HP \/ 1.1 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUnit Dimensions (L × W × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,227 × 1,156 × 830 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Inlet Duct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e577 × 267 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Outlet Collar\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eØ 197 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-washable, stainless steel flange, edge-hardened media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch-screen PLC with MODBUS RS485\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pressure switches, safety thermostat, reactivation cooldown, SSR heater control, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order, approximately 5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003c!-- Add document links here --\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47867641594013,"sku":"MP-2700","price":74120.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47867641626781,"sku":"MP-2700","price":74505.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47867641659549,"sku":"MP-2700","price":74645.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47867641692317,"sku":"MP-2700","price":83495.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47867641725085,"sku":"MP-2700","price":83880.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47867641757853,"sku":"MP-2700","price":84020.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-2700_stainless_steel-removebg-preview.webp?v=1777383377"},{"product_id":"bry-air-minipac-mp-1200-desiccant-dehumidifier-stainless-steel","title":"Bry-Air MiniPAC MP-1200 Desiccant Dehumidifier – Stainless Steel","description":"\u003ch2\u003eMP-1200 Desiccant Dehumidifier — High-Capacity Drying for Cold and Industrial Spaces\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade to order — estimated 5-week lead time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Bry-Air MiniPAC MP-1200 is a 1,200 CFM desiccant dehumidifier designed for facilities where refrigerant units lose capacity or stop operating altogether. It maintains steady moisture removal at low temperatures and low humidity targets without defrost interruptions. Compared to LGR systems at similar airflow, the MP-1200 delivers consistent output across the full operating range, including cold storage and process-critical environments.\u003c\/p\u003e\n\n\u003ch3\u003eBry-Air MP-1200 Continuous Low-Temperature Performance\u003c\/h3\u003e\n\u003cp\u003eDesiccant rotor operation removes the temperature limitations associated with compressor-based systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200 CFM process airflow\u003c\/strong\u003e — supports large warehouse zones, manufacturing floors, and multi-room drying applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39.6 lbs\/hr moisture removal\u003c\/strong\u003e — maintains consistent extraction even as ambient temperature drops below refrigerant operating limits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo defrost interruptions\u003c\/strong\u003e — eliminates downtime common in refrigerant units operating below 50°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-washable rotor with stainless steel flange\u003c\/strong\u003e — allows on-site maintenance while resisting corrosion in high-humidity intake conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated airflow safety controls\u003c\/strong\u003e — protects operation by shutting down under low airflow or overtemperature conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible installation configurations\u003c\/strong\u003e — supports floor, wall, or ducted integration in mechanical rooms and process areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMP-1200 Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe MP-1200 is deployed in pharmaceutical manufacturing for tablet coating, powder handling, and packaging areas where humidity control directly affects product stability. Cold storage warehouses and refrigerated loading docks use it to prevent condensation on inventory and structural surfaces where refrigerant systems fail at low temperatures. Large distribution centers, automotive storage facilities, and electronics manufacturing environments rely on it to reduce corrosion risk and maintain material integrity. Archival storage rooms, museums, and government facilities use it to stabilize humidity for paper, film, and sensitive materials across seasonal temperature changes.\u003c\/p\u003e\n\n\u003ch3\u003eMP-1200 Desiccant vs Refrigerant Operation\u003c\/h3\u003e\n\u003cp\u003eRefrigerant systems depend on coil temperature dropping below the dew point, which becomes impractical below 45–50°F due to icing and defrost cycling. The MP-1200 uses a desiccant rotor to adsorb moisture through a chemical process, maintaining output from sub-freezing conditions up to high ambient temperatures. The 400 CFM reactivation airstream removes moisture from the rotor and must be ducted outside; recirculating this exhaust will reintroduce moisture into the space. The unit requires 460V three-phase power and should be installed with proper ducting and electrical capacity verification.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMP-1200 \/ MiniPAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBry-Air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesiccant (rotary wheel, no compressor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,200 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation Airflow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReactivation External Static\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.45 in. wc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMoisture Removal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e39.6 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e460V \/ 3-phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (L × W × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47.3\" × 34.6\" × 24.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-washable, stainless steel flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAuto \/ Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFloor, wall, or duct-inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety Systems\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDifferential pressure switch, safety thermostat, reactivation cooldown, electrical interlocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003c!-- Add document links here --\u003e\u003c\/p\u003e","brand":"Bry-Air","offers":[{"title":"No \/ No Humidistat Included","offer_id":47867647328413,"sku":"MP-1200","price":44605.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Room Humidistat","offer_id":47867647361181,"sku":"MP-1200","price":44985.0,"currency_code":"USD","in_stock":true},{"title":"No \/ with Duct Humidistat","offer_id":47867647393949,"sku":"MP-1200","price":45125.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ No Humidistat Included","offer_id":47867647426717,"sku":"MP-1200","price":49875.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Room Humidistat","offer_id":47867647459485,"sku":"MP-1200","price":50255.0,"currency_code":"USD","in_stock":true},{"title":"with Weather Kit \/ with Duct Humidistat","offer_id":47867647492253,"sku":"MP-1200","price":50395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/MP-1200_stainless_steel-removebg-preview.webp?v=1777383167"},{"product_id":"ebac-dd400-e-desiccant-dehumidifier","title":"Ebac DD400-E 10500GR-US Desiccant Dehumidifier 220V – 71 PPD, 271 CFM, Sub-Zero","description":"\u003ch2\u003eDD400-E Desiccant Dehumidifier for Sub-Zero Drying\u003c\/h2\u003e\n\u003cp\u003eThe Ebac DD400-E uses a desiccant rotor rather than a refrigeration cycle, so it keeps drying in cold air where a compressor unit drops off. It runs to -4°F, moves 271 CFM of process air on a 220V single-phase supply, and targets the low humidity levels that refrigerant units cannot reach.\u003c\/p\u003e\n\u003ch3\u003eDD400-E 10500GR-US Desiccant Operation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying down to -4°F\u003c\/strong\u003e keeps the unit working in cold stores and winter sites where a refrigerant coil would frost and stall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilica-gel rotor\u003c\/strong\u003e reaches the low relative humidity that moisture-sensitive materials and coatings need\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e271 CFM process air with a separate 80 CFM regen stream\u003c\/strong\u003e dries the space while exhausting captured moisture outside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-capacity PTC heaters\u003c\/strong\u003e regenerate the rotor efficiently and modulate with the load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual and automatic modes with a remote humidity sensor facility\u003c\/strong\u003e let an operator run a fixed output or hold a setpoint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarry handles on a compact 59.5 lb cabinet\u003c\/strong\u003e make it a one-person move between rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDD400-E Applications and Environments\u003c\/h3\u003e\n\u003cp\u003eThe DD400-E fits cold storage, pharmaceutical and laboratory rooms, coating and paint booths, and restoration drying in unheated structures. Because it captures moisture on a desiccant rather than condensing it, it serves walk-in freezers, server and battery rooms, and archive storage where the target humidity is well below what refrigerant units hold. The separate process and regeneration ducts let an installer keep dry air in the room while sending wet air outdoors.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTypical Extraction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e71.5 PPD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Airflow (Dry)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e271 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRegen Airflow (Wet)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcess Air Duct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRegen Air Duct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotor Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 rph\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220V \/ 1-Phase \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCurrent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-capacity PTC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-4°F – 104°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e67 dBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (H×W×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.3 × 14.5 × 18.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e59.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US-manual.pdf?v=1780777519\"\u003eDD400-E Owner's Manual (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US-brochure.pdf?v=1780777512\"\u003eDD400-E Specification Sheet (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US-spares.pdf?v=1780777514\"\u003eDD400-E Spare Parts List (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US-diagram.pdf?v=1780778386\"\u003eDD400-E Wiring Diagram (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US-schematic.pdf?v=1780778389\"\u003eDD400-E Wiring Schematic (PDF)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ebac","offers":[{"title":"Default Title","offer_id":48380976398493,"sku":"10500GR-US","price":4867.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/8112\/2717\/files\/10500GR-US.webp?v=1780777847"}],"url":"https:\/\/uscleaningtools.com\/collections\/1000-cfm-desiccant-dehumidifiers.oembed","provider":"US Cleaning Tools","version":"1.0","type":"link"}